This ad is maintained in a searchable database. This ad may have been modified or even deleted since this page was posted. To see the current ad with all of the details, please go here.
The advantages are: Very strong design of the cutting chamber, the rotor and the frame, the machine is Coated with Zinc before the painting, relatively simple design - this will help of the workers to serve the machine, the granulators has different design of the cutting chamber, of the rotor and the in accordance with the different waste which will be processed into the machine, the SKF bearings are one of the the warrantyes for the quality of the work of the granulator, the knives steel is X153CrMoV12 = D2 = 1.2379, the rubber belts are from Germany, the motors are made in Italy, Hydraulic unit suitable for the opening of the screen cradle and for removing of the hopper, Preventive Clutch between the shaft and the pulley for the rubber belts from the motor drive will be very useful if into the cutting chamber fail big piece which can to block the rotor - this unit will rescue the granulator from big damages, all knives (bed and fly) are adjustable - Full protection at operation - Total stop before various accesses to the machine - Full automated control - Easy change of the screen - A jig where the rotor knives can be pre-set outside of the machine so that you can change them quickly without adjusting them in the machine - El. motors made in Italy up to 160 kW (1'500 rpm / 1'750 rpm ) 3 phases / (60 Hz / 50 Hz) 480/400 V / IP54 or IP55 / Thermal Protection - The Motor Controls (Star-Delta) with units from "Square D" or "Telemechanique". We can supply the machine and with Soft-Start for the motor.
