This ad is maintained in a searchable database. This ad may have been modified or even deleted since this page was posted. To see the current ad with all of the details, please go here.
OD Grinder 14swing x 36 centers
Ad Number: 9149
Year: 72?
Make: Landis
Model: 2R
Machine Type:
Condition: Good
Price: 3,950.00
Description: OD grinder # 2R 14" swing x 36 in center dist 14 " wheel Swivel/universal head 8" 3 jaw chuck Std specs below-please verify Normal work swing 6"-10" Maximum work swing over table 6 31/32" Nominal distances between work centers 18"-30" Maximum work swing and diameter standard machine will grind with full standard wheel on machine with hydraulic infeed strokes 6" - 2" H.I. May be smaller on angular wheelhead machine because of work piece configuration mimimum diameter wheel to grind zero diameter work on center 15". May be smaller on angular wheelhead machine because of work piece configuration Coolant tank capacity 19 gallons Hydraulic tank capacity 19 gallons
WORK CARRIAGE
Traverse speed - inches per minute 2 to 240 all lengths thru 72" 96" 120" Traverse speed per turn of handwheel slow 0.100" fast 1.000" Work rest capacity 1/4" to 2 1/2" - 6" 1/4" to 4" - 10"
WHEELHEAD AND WHEELFEED
Grinding wheel size 24" x 2" x 12" Grinding wheel maximum width 5" Grinding wheel spindle speeds rpm 1000/1271 Grinding wheel minimum diameter of worn wheel 15". May be larger on angular wheelhead machines because of workpiece configuration Automatic infeed at table reversal on diameter basic machine 0.0003" to 0.004". Machine with hydraulic infeed 0.0002" to 0.004" Distance wheel centerline to work centerline hydraulic infeed machine max 18", min. 7 1/2" Work diameter reduction per revoution of wheelfeed handwheel 0.100" Work diameter reduction per revolution of fine feed knob basic machine 0.010" hydraulic infeed 0.001" Maximum hydraulic infeed on diameter for hydraulic infeed machines 0.090" Rapid infeed stroke for hydraulic infeed machine max 2" min. 1/2"
HEADSTOCK AND FOOTSTOCK
Work centers footstock center movement by #10 jarno levers only Headstock work speeds rpm dead spindle 94-154-246-400 live spindle 1000-154-240-400
ELECTRIC MOTORS
Wheel drive motor 7 1/2 hp Wheel spindle lubrication pump motor 1/4 hp Work drive motor 1/2 hp
