|
|
|
|
|
|
Vertical Machining Centers (VMC)
This ad is maintained in a searchable database. This ad may have been modified or even deleted since this page was posted. To see the current ad with all of the details, please go here.
12000 RPM Full 4th Axis Wired 5th
|
Ad Number: A7848
|
|
Year: 2004 | Make: Chiron | Model: DZ15KW
|
| Machine Type: Vertical 5 AXIS | Condition: Excellent | Price: 300,000.00
|
Description:
There are two (2) matching machines.
Type DZ15KW
Nr 134-60 and Nr 134-61
These are full 4th Axis and Wired for 5th
Controllers are GE Fanuc Series 18i - MB5
Both units are Twin Spindle
Both are 2005 models and weigh 10070kg each
The Chirons are loaded with options.
They include:
· Chip conveyors and filters
· Laser measurement system
· Tool presetter - unused
· Extended tool pockets
'K' designates machine w/ chain magazine
'W' designates machine w/ workpiece changer
'DZ' Twin Spindle
Price new today w/ standard features like 12K rpm spindle, HSK 63 tool
shank, (2) 24 station tool changers, standard rapids of 60M/min,
$308,900.00.
Manufacturer: Chiron America Inc.
Products: High production CNC Vertical Machining Systems
Model Number: DZ 15 K W
Machine Description: CNC Vertical Machining Center
Table Data: Spindle Data:
Table Length (in) Spindle Power HP
Table Width (in) Speed Standard 20 ~ 12,000 rpm
Table Diameter (in) Speed Option 1 rpm
Table Load (lbs) Speed Option 2 rpm
Axis Travel Data: Tool Data:
Travel XYZ-axis 12/16/14 (in) Number of Tools 24 (#)
Travel ABC-axis (deg) Taper HSK 63
Rapid Traverse Rates XYZ 2,400/2,400/ (ipm) Tool Diameter 3.200 (in)
Positioning Accuracy XYZ +/- (in) Tool Weight 22.0 (lbs)
Repeatability XYZ-axis +/- (in) Tool Length Maximum 9.80 (in)
Pallette Changer Tool Change Time 0.90 (sec)
Chip to Chip Time 2.40 (sec)
High-Tech in double pack Vertical machining centers DZ 15
The new double spindle center
for the highest productivity
The CHIRON double-spindle center DZ 15 W for simultaneous
machining of two workpieces in one working cycle is celebrating
its introduction at the Metav. In combination with the super-fast
0/180° workpiece changing device, this latest CHIRON
development can hardly be bettered with regard to productivity.
The workpiece changing device has a clamping surface of
2 x 660 x 400 mm2 and changes workpieces weighing up to 400 kg
in 2.4 secs, during which the CHIRON speed control reacts to the
different workpiece weights and maintains the change-over times
constant, irrespective of the load.
But the automatic tool changer, with 2 x 12 SK 40 or HSK 63 tool
tapers, is even faster and stands out with its 0.9 secs. tool changing
time and 1.9 secs. chip to chip time. Rapid feeds of 40 m in all axes,
acceleration of 0,5 g and spindle speeds of 10500 rpm
(options: rapid feeds up to 60 m/min with 1 g aceleration and
spindle speeds of 12000 and 20000 rpm) are further factors,
which emphasize that speed is a major factor at CHIRON.
The extremely stiff moving column construction with optimized
chip clearance and highly dynamic AC motors of 2 x 90 Nm
(otion 2 x 180 Nm) enable the most respectable milling
performances to be achieved.
A travel range of 300 x 400 x 425 mm (X-Y-Z) and a spindle spacing
of 250 mm in the X-axis ensure that the machine can be used for a
wide spectrum of parts production. The inwards opening doors and
the integrated control panel enhance the extremely compact and
space-saving construction of this machine, despite the relatively
extensive travel range. The consequent separation of the working
area from the rest of the machine enables chips, coolant and vapors
to be directed away directly at their place of origin.
The specially designed working area, with it s smooth and
almost vertical walls, which direct any chips direct into the chip
disposal system, ensure that this machine is ideally suitable for
dry machining. However, the machine is nevertheless suitable
for use with cooling lubricants or minimal quantity lubrication
and has an internal coolant supply through the spindle as well
as external coolant nozzles.
The extremely practical design for low maintenance operation
forms yet another new feature of this machine, with the machine
having digital direct drives without limit switches and obviating
oiling of the pneumatic elements. The coolant supply, for removal
of the chips, is either not required at all or only in small quantities,
and the new, high-performance linear guides with integrated
lubricant reservoir require maintenance only every three years.
Comments:
These machines are 2 years old and are worth around 400k each per the manufacturing engineer. He said they will be available in around 7-8 months when the transfer line is retrofitted to run these parts in addition to what it now runs.
|
|
|
Information on our Dealer Program
Terms of Use | Privacy Statement | Tell Your Friends
Content copyright © 2000 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Powered by e-Classifieds.net. Copyright © 1995-2000 Hagen Software Inc. All rights reserved.
Website Hosting & Development by IndSite.
| |
