|
|
|
|
|
|
Vertical Machining Centers (VMC)
This ad is maintained in a searchable database. This ad may have been modified or even deleted since this page was posted. To see the current ad with all of the details, please go here.
1983/01 Okuma MCV A 16 x 30 CNC Vertical Machining Center
|
Ad Number: A7461
|
|
Year: 1983/01 | Make: Okuma | Model: MCV A 16 x 30
|
| Machine Type: Vertical Machining Center | Condition: Very Good | Price: 249,500.00
|
Description:
Travels 118.11" x 62.99" x 15.75"
2,000 RPM
25 HP
24 ATC
OSP 7000M
Full Machine Specifications
Control OSP 7000M
Table Size 47.24" x 122.05"
Effective Distance Between Colums 64.96"
X Axis 118.11"
Y Axis 62.99"
Z Axis (Quill) 15.75"
W Axis (Rail) 39.37"
Spindle Speed (12 Programmable Speeds) 45-2000 RPM
Spindle Motor Power 25 HP
Taper in Spindle MAS BT 50
Tool Holders (Brand New) 20
Distance Spindle Nose To Table 0-53.15
Feedrate (X.Y.Z) .04-394 IPM
Rapid Traverse (X,Y/Z) 394/197 IPM
Automatic Tool Changer 24 Tool Capacity
Overall Dimensions (Machine Only) L 315", W 171", H 173"
This machine was remanufactured and retrofitted by
Okuma Engineering in 2001 (Division of Okuma
Corporation-Nagoya Japan). The remanufacturing
included:way systems, drive trains (axis ball
screws), machine electrics, new wiring, integration
of new OSP-7000M CNC System. Recently the
machine spindle clutches have been replaced
and spindle brake has been replaced. The machine is
fully functional and under power and ready for
inspection. Since 2001 the machine has had minimal use,
Power On Hours: 8208
Spindle On Hours: 2720
CNC Hours: 1401
Part program storage: 2,560 meters
RS-232-C Port, 3.5” floppy disc
IGF Function
DNC-B
Animation
Helical Interpolation
One Direction Positioning
Change Work Coordinate
Exact Stop
Programmable Mirror Image
Scaling (Enlarge/Reduction) Manual Guaging
Inductosyn X & Y Axis
Tool Life Management
Wook Coordinates 50 Sets, Tool Data 200 Sets
Coordinate Calc, Area Machining, Program Limit
Program Message
Inch/Metric Switchable
System Variable, Add Math Function, Sub Programs
Schedule Programs
Coolant, Air Blow Oil Hole |
|
|
Information on our Dealer Program
Terms of Use | Privacy Statement | Tell Your Friends
Content copyright © 2000 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Powered by e-Classifieds.net. Copyright © 1995-2000 Hagen Software Inc. All rights reserved.
Website Hosting & Development by IndSite.
| |
