| Year:
| 2002
|
| Make:
| Birmingham
|
| Model:
| B3VS
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 6500
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
California
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Very low hours Less than 4000 hrs.
·Heavy-duty meehanite castings
·Hardened & ground square ways
·Turcite-coated surfaces
·Easy to use control with Built in Mastercam2
·Auto lubrication
·Power draw bar
·Halogen work light
·Coolant system
·Table top enclosure
·Base chip coolant drop pan
·220 Volt/3-Phase
·2200 lbs table load
·auto calibration of table weight
·Specifications: B3VS Specifications: B3VS Table size 12”x60" X Axis travel 41" Y Axis travel 20" Z Axis travel (Headstock travel) 23" Quill travel 5" Spindle RPM 130-5160 Spindle taper NTS 40, FIBER OPTICS Servo motors HP DC servo, Spindle motor HP 5 Programmable speeds CNC control Head design Tilt Cross ways Box Vertical ways Box Net weight 6,500 lbs.
·EXCELLENT CONDITION
·Can Be used Manual or run in full 3 axis CNC (LEARN TEACH)
·CONVERSATIONAL PROGRAMMING
Upgraded Centroid M400 Controller
Includes: G65 Sub’s and Macros, G84 Compression Tapping,
G54, G59 Work Coordinate System, G50, G51 Mirror and Scaling. (Options unlocked)
Engraving Software (Options unlocked)
Solid State Hard Drive
128 MB Ram
800 Mhz
Floppy Drive
RS-232, Ethernet
Inverter Drive System
Steel way cover on Y axis (Installed Options)
Rear Chip Guards (Installed Options)
MPG Electric Hand Wheel for X, Y, Z&4th (Installed Options)
Power Draw bar, Coolant System
Digitizing Probe & Software (Digitizing Software Package Options unlocked 0)
TT-1 for Auto Tool Measuring (Options unlocked)
Unlimited File Size Software (Options unlocked)
BobCadCam Design Software 3D
Laser Mapping of Ballscrews to .00007 linear and .00009 interpolation (Options unlocked)
ISO 1725 Certification
INTERCOM CONVERSATIONAL PROGRAMMING
2002 BIRMINGHAM BED MILL WITH CENTROID M-400 CONTROL
12X60 TABLE 40X20X23 TRAVEL
AUTO CALIBRATION FOR TABLE WEIGHT (TABLE LOAD 2200LBS)
PROGRAMMABLE SPEEDS 130 – 5200 RPMS
BUILT IN INTERCOM CONVERSATIONAL PROGRAMMING WITH MATH HELP AND AUTO RADIUS BLEND FUNCTIONS
COLOR LCD WITH GRAPHICS
CENTROID M-400 CONTROLLER UNLOCKS/OPTIONS INCLUDE:
UPGRADED MOTHER BOARD/800 MHZ. PROCESSOR/EXTRA FANS/USB SUPPORT
128 MEGS RAM
SERIAL PORT
PRINTER PORT
ETHERNET PORT
FLOPPY DRIVE
MOUSE PORT
SOLID STATE HD
UNLIMITED FILE SIZE NO DNC NECESSARY (UNLOCKED)
18 WORK COORDINATE OFFSETS (UNLOCKED)
MILLWRIGHT ENGRAVING BUILT IN W/DXF IMPORTING (UNLOCKED)
MASTERCAM BUILT IN (UNLOCKED)
THREAD MILLING (UNLOCKED)
CONVERSATIONAL PROGRAMMING (UNLOCKED)
PROBING (UNLOCKED)
DIGITIZING (UNLOCKED)
SCALING/MIRROR/ROTATION (UNLOCKED)
AUTO TOOL TOUCH (UNLOCKED)
READY FOR NEW SOFTWARE UPDATE (OPTION FROM CENTROID)
RIDGED TAPPING (NOT UNLOCKED “UNLOCK CODE AVAILABLE FROM CENTROID”)
5,850 LBS. GROSS WEIGHT
See options and videos at http://www.centroidcnc.com/accessories.htm
TOOLING FOR MILL:
Ø2 MATCHING D-675 KURT VISES
Ø2 HUOT TOOL RACKS W/ROLLING CART
Ø1 ENCO 0-1/4” TAPING HEAD W/1/2” SHANK
Ø1 TAPMATIC #6-1/2” TAPING HEAD W/1” SHANK
Ø20 EA. 40 TAPER TOOL HOLDERS TO INCLUDE:
Ø1 Integral ½” DEVLIEG MICRO-BORE
Ø2 DA-300 COLLET HOLDERS
Ø1 TG-100 COLLET HOLDER
Ø2 0-1/2” KEYLESS DRILL CHUCKS
Ø2 SHELL MILL HOLDERS (NEW NEVER USED)
Ø12 VARIOUS SIZE END MILL HOLDERS 3/16”TO 1”
ØALL MANUALS AND PROGRAMMING GUIDE
2000 Top-Turn 406 CNC Flat Bed Lathe
Purchased new in 2002
Less than 2000 hours
Model ………………………………………CNC 406
Distance Between Centers…………………34””
Max. Turning Length……………………...32”
Swing over Bed…………………………… 16”
Swing over cross slide…………………….. 7-7/8”
Cross slide travel………………………….. 8-1/4”
With of bed………………………………... 11-13/16”
Spindle nose………………………………. D1-6
Spindle hole………………………………. 2-1/4”
Taper of spindle………………………….. M.T. #6
Variable spindle speeds……………………HI 361-3000 LOW 5-360
Spindle motor………………………………7.5HP
Spindle diameter at front bearing……….. 3-5/16”
Longitudinal feed force……………………7.5Nm AC servo motor
Rapid motion speed………………………..Z 20 (DIA) 10 Pitch
Longitudinal traverse……………………...X 20 (DIA) /5 Pitch
Feed range………………………………….0-5/8” 0-15mm/rev
Thread pitch range……………………….. 0.004-15 ¾
Tail stock quill diameter…………………..M.T. #4
Positioning/repeatability ……………….…0.0008/12”
600 Pound bearing weight / dual headstock bearings
Fagor 8025 Controller (upgraded from 800T to new 8025 in 2005)
CONVERSATIONAL PROGRAMMING ,G Code or DNC
6,500 lbs. Gross weight
Ø1ea. 8” 3 JAW CHUCK W/KEY
Ø1ea. 12” 4 JAW CHUCK W/KEY
Ø1ea. 15” CAST IRON FACE PLATE
Ø1ea. BISON 5C COLLET CHUCK MOUNTED ON D1-6 PLATE W/KEY
Ø2ea. 3 BEARING STEADY RESTS
Ø1ea. 5/8 DRILL CHUCKS W/KEY FOR TAIL STOCK
Ø1ea. SKODA LIVE CENTER FOR TAIL STOCK
Ø2 SPEED MANUAL TAIL STOCK #4 MT
ØADDED UP FRONT RS232 PORT
Ø25 ASSORTED NEW AND USED 5C COLLETS
Ø1 5C COLLET RACK
ØDNC AND OFF LINE FILE TRANSFER SOFTWARE
ØALL MANUALS AND DOCUMENTATIONS
KB36 VERTICAL BAND SAW
ØTHROAT 14”
ØWORK HEIGHT 9 1/16”
ØTABLE SIZE 19 ½ 15 ¼
ØTABLE TILTS 4 WAYS
ØVARIABLE SPEED 65-295
ØBLADES 1/8 – 5/8
Ø220 SINGLE
Ø1 HP
Ø628 LBS. Gross (net weight 551lbs)
Ø2 TABLES (1 NEW NEVER USED 1 GROOVED TABLE FOR MITER WAS OPTION)
ØMITER (WAS OPTION)
ØFENCE (WAS OPTION)
ØWORK LAMP
ØTILTING TABLE
ØBLADE SHEAR
ØBUILT IN BLADE AND TIRE CLEANING BRUSH
ØAIR CHIP REMOVER
ØBUILT IN WELDER/ANNEALING AND GRINDER W/LIGHT 1/8”-5/8”
ØAPPOX. 30 FEET MIXED BLADE STOCK
ØTOOL KIT
ØALL MANUALS
Ø
ALSO AVAILABLE:
ØPALMGREN 2-TON ARBOR PRESS
ØCYCLONE PK36 SAND BLASTER W/STAND, MEDIA AND EXTRA REPLACEABLE SHIELD PROCTORS, EXTRA GUN TIPS
ØPORTER CABLE C7550 80GAL. 2-STAGE 6HP. OIL LUBE AIR COMPRESSOR 175psi 220 SINGLE
Ø2’X3’ GRANITE SURFACE PLATE W/STAND
ØENCO 24” HEIGHT GAUGE
Ø12”X9”X8” SLOTTED ANGLE PLATES
ØINSPECTION GAUGE PINS SETS FROM .061 TO .750 “-0002” (COMPLETE SETS IN 4 WOOD/PLASTIC BOXES SOME STILL IN WRAPPERS)
ØLOTS OF ALUMINUM STOCK ALL 6061 T6
Ø2 EA. 1”X12”X12”
Ø1 EA. 3/8”X12”X12”
Ø15 EA. 6’X1”dia. X 3/16” WALL TUBING (ALUM.)
Ø1ea. ¼”X2”X4’
Ø2ea. ¼”x6”X4’
ØMISCELLANIES LOTS OF ALUMINUM PLASTICS IN SQUARE /ROUND / PLATE STOCK MOST 3 FEET AND LONGER
I have been a Machinist for over 35 years and all machines are well maintained and never pushed or crashed. Most work done was on 6061 T6 Aluminum, Delrin and PVC III, we were a Research and Development company specializing in one offs, models and Reverse Engineering that is why we chose these machines for their ease of use and being able to run manual or full CNC, Mills probing and part digitizing is totaling amazing and can duplicate and define compound angles and radius’s and Probing results can be instantly duplicated of downloaded for off line Cad modifications (see demo at http://www.centroidcnc.com/cncvideo/video_3d_dig.html ). I Purchased all machines and tooling new. Lathe http://www.taipeitradeshows.com.tw/product_info.shtml?comno=97543590&showno=NSC1007&docno=33830
|
| Electrical Description |
|
|
| Comments: |
- Options below now included in this price
Can buy without below less $1500.00
Upgraded Centroid M400 Controller
Includes: G65 Sub’s and Macros, G84 Compression Tapping,
G54, G59 Work Coordinate System, G50, G51 Mirror and Scaling. ($475.00)
Engraving Software ($665.00)
Solid State Hard Drive
128 MB Ram
800 Mhz
Floppy Drive
RS-232, Ethernet
Inverter Drive System
Options below now included in this price
Can buy without below less $1500.00
Steel way cover on Y axis ($375.00)
Rear Chip Guards ($425.00)
MPG Electric Hand Wheel for X, Y, Z&4th ($670.00)
Power Draw bar, Coolant System
Digitizing Probe & Software (probe $2210.00 Digitizing Software $4200.00)
TT-1 Probe for Tool Measuring ($755.00)
Unlimited File Size Software (275.00)
BobCadCam Design Software 3D (300.00)
Laser Mapping of Ballscrews ISO 1725 Certification ($400)
If a Package Deal is done “TAKE IT ALL” with any company/individual I will throw in 2 Matching 2002 Kurt Vises D675 ($998.60) Set of 20 Various 40 taper Tool holders (1 intergraded ½” Drill Chuck, 1 intergraded Devlieg Micro Boring Head ½”, 2 DA Collets holders, 1 TG 100 Collet holder 2 Never used Shell Mill Holders and 15 Various End Mill Holders from 3/16” to 1 “ Dia. $1700.00) 2 Holt 40 Taper Racks ($95.00) Set of 25 mixed New some never used and Used 5C Collets ($150.00) 5C Collet Rack ($20.00) A 5/8” Drill Chuck on MT #4 for Lathe ($100.00). #4 MT Live center (275.00)
“THAT OVER $3300.00 WORTH OF REALLY NICE ACCESSORIES AND THAT’S BEFORE TAX IF YOU WERE TO BUY IT RETAIL…….” SELLING MY MACHINE SHOP EVERYTHING PURCHASED NEW IN 2002
|
|
