| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 12885 | CNC Vertical Milling Machines w\o ATC |
| — |
Trionics |
Handy Man |
Good |
sold |
Photo /
More Info. |
| 9 x 49: Trionics-Handy Man
Can be run cnc or manual mofes,
3 Axis cnc
3 Hp
9" x 49" Table |
|
| Ad # 14380 | CNC Vertical Milling Machines w\o ATC |
| 74 |
Cincinnati Milacron |
15V 1800 |
Good |
sold |
Photo /
More Info. |
| X 72" x Y 30" x Z 30": Cincinnati Milacron 15V 1800 CNC
In working order and still in production.
Ideal machine for large components and low volume
production.
X Travel 72"
Y Travel 30"
Z Travel 30"
Universal Quick Switch adaptor in IS 50
Spindle
Acramatic Big Blue CNC Control
This machine is working and is under power.
Good buy for someone who needs a large mill |
|
| Ad # 14381 | CNC Vertical Milling Machines w\o ATC |
| 1980 |
BostoMatic |
300 Series |
Good |
sold |
Photo /
More Info. |
| X 18" x Y 12" x Z 12": BostoMatic Series 300 Twin Spindle CNC
Precision Vertical Bed type Milling Machine
Twin spindles 40 000 rpm and 4000 rpm for
grinding and milling
Travel
X axis 18”
Y axis 12”
Z axis 12”
In working order and some extra tooling |
|
| Ad # 14349 | CNC Vertical Milling Machines w\o ATC |
| 2008 |
Acra |
AM4ACNC |
Good |
sold |
Photo /
More Info. |
| Table Size: 54" x 10": 3 axis cnc: CNC Vertical Milling Machine
Make: ACRA
Model: AM4ACNC
3 axis cnc control
vari-speed EVS head type
control: acu-rite millpower 3 axis
Capacity: Table - 54" x 10"
Electrical: 460/3 phase wired now
"X" Axis Travel:34"
"Y" Axis Travel:15"
"Z" Axis Travel:20"
Quill Travel:5"
Spindle Speed:50-5,000 RPM
Spindle Taper:#40
Spindle Motor:5 HP
riser block:12" ?
|
|
| Ad # 9711 | CNC Vertical Milling Machines w\o ATC |
| 97 |
Venture |
1800 |
Good |
sold |
Photo /
More Info. |
| 20x30x16: 20 x 30 x 16 travels
80-7200rpm high range
60-800 rpm low range
5 hp
32 port autocon/dyna path delta control/with hand control
spi angle loc vise
18 tool holders incl.
|
|
| Ad # 12712 | CNC Vertical Milling Machines w\o ATC |
| 1999 |
Chevelier |
FM-32SP |
Excellent |
sold |
Photo /
More Info. |
| 10" X 50" tablw w/Prototrak M2 Control: 1999 chevelier FM-32SP cnc/manual mill
3 HP spindle
Prototrak M2 Control-was replaced recently-new
2 axis auto movement or manual mill
3rd axis DRO
Power Draw bar |
|
| Ad # 14785 | CNC Vertical Milling Machines w\o ATC |
| 97 |
Pro |
DPM |
Good |
sold |
Photo /
More Info. |
| 10" x 50": Proto Trak DPM
Control: Trak A G E 3
10" x 50" Table
#40 Taper tool holder
Air drawbar
Travel (X, Y, Z axis) 31 x 17 x 21"
Spindle Speed Range 200 – 3500 RPM
220/3 Phase |
|
| Ad # 13527 | CNC Vertical Milling Machines w\o ATC |
| 1998 |
prototrak |
DPM |
Excellent |
sold |
No Photo /
More Info. |
| 1200 Lbs. : 3 axis cnc prototrak mill. full conversational programming
including thread milling, circle pocket and frame, rectangular
frame and pocket, irregular pocket (multi-sided asymmetrical),
bolt hole patterns, drilling / boring cycles, mold rotation,
scaling, copy cycles, repeat cycles, DNC operation via CAD/CAM
interface, programmable coolant and spray mist,Output for CNC
rotary, Head completely rebuilt within the last 12 months
including rebuilt spindle motor, variable speed discs, belts,
spindle bearings, etc. Machine is in excellent shape and holds
tolerance with no problem. The head is quiet as new, the ball
screws are in great shape. New Z servo/driver in the last 12
months, new computer within the last 12 months. 40 taper
spindle, SOME tooling included. Free loading on a flatbed truck
or trailer. I need to make room for a larger machine. $th axis and
jigs shown not included. |
|
| Ad # 7887 | CNC Vertical Milling Machines w\o ATC |
| 1998 |
Acer-Ultima |
3VKH |
Excellent |
Sold |
Photo /
More Info. |
| 10X50 CNC Knee mill: 10x50 table/Model # 98030353/ 3 HP-3 Phase motor w/ phase converter/ Variab... |
|
| Ad # 5221 | CNC Vertical Milling Machines w\o ATC |
| 1988 |
WEBBMATIC |
5BVK |
Very Good |
Sold |
Photo /
More Info. |
| —: #5BVK WEBBMATIC 800 CNC Vertical Mill, Fanuc 0M Control, 13"x 42" 5HP, S/N-... |
|
| Ad # 9595 | CNC Vertical Milling Machines w\o ATC |
| 92 |
hurco |
mhp-3k |
Very Good |
Sold |
Photo /
More Info. |
| 11x 49 table-3 axis: 11 x 49 table
electonic hand wheel
Dynopath 20M control
3 HP motor
calculate asst.
rapid traverse-250
500-4500 spindle variable speed
coolant
full range of collets and holders inc r-8 spindle |
|
| Ad # 13455 | CNC Vertical Milling Machines w\o ATC |
| — |
Journeyman |
325 |
Excellent |
sold |
Photo /
More Info. |
| Table Size 10" x 44";Table Travels (X/Y) 27" x 14" : CNC Journeyman 325 Tree Milling Machine.
CNC mill runs great.
With this setup you can run unlimited code.
Control allows you to program straight from the controller or you can send unlimited code from the computer.
It is under power so you can see it run.
Will fit under any standard garage door.
Rotary Phase converter to run on 220 single phase
Run unlimited code with DNC software loaded.
1 Tool holder with several collets.
Specification Description
Table Size 10" x 44"
Table Travels (X/Y) 27" x 14"
Programmable Quill Travel 6"
Knee Travel (Manual) 15.75"
Throat Distance 14.1"
Spindle to Table Distance 0 - 21-1/4"
Spindle Speeds 50 - 6,000 RPM
Quill Diamter 4"
Spindle Taper Cat 40
Rapid Traverse Rate 250 IPM
Cutting Feedrates 0 - 100 IPM
Spindle Drive 5 HP
Approx Ship Dimensions 60" x 72" x 80" H
Approx Weight 4,600 Lbs.
Electrics 230 Volt / 3 Phase
Can help load yes• |
|
| Ad # 9578 | CNC Vertical Milling Machines w\o ATC |
| 2007 |
Haas |
VF-3SS |
Very Good |
sold |
No Photo /
More Info. |
| 40x20 table: 4th axis ready
usb port
40x20 table
24+1 tooling
inline direct drive spindle
high speed tool change
1,400 ipm
wired for 4th axis
very good cond
manufacture date of 05-07
rigid tapping
direct drive 12,000 rpm
It is a Haas 4th axis, model # SHA5CB with matching tail stock. Here are some run times. Servo time is 895:26:55, Motion time is 331:43:00, and Spindle time is 340:38:24. It does not have coolant thru spindle. Let me know if your interested. |
|
| Ad # 13420 | CNC Vertical Milling Machines w\o ATC |
| 1980's |
Bridgeport |
Interact 1 Mk 2 |
Good |
sold |
Photo /
More Info. |
| Bridgeport Interact 1 Mk2, with Heidenhain TNC 151 Controller : Bridgeport Interact 1 Mk2,
with Heidenhain TNC 151 Controller (probably late 80's).
have all manuals, and a fair amount of NMTB QC30 taper tooling.
The axis movements are by servo motors with encoder feedback and the mill has auto oiler on ways and ballscrews and a mister unit for tool cooling.
It also has a variable speed DC motor on the spindle and the spindle has a brake. Bridgeport 3 axis CNC Mill, with tooling.
230v 3 ph.
Running when taken out of service.
Cash only, Pickup only. |
|
| Ad # 5101 | CNC Vertical Milling Machines w\o ATC |
| — |
Milltronics |
Partner IV |
Good |
Sold |
Photo /
More Info. |
| Milltronics Partner IV CNC Knee Mill: SPECIFICATIONS
TRAVELS (X AXIS) ----------------------- 32"
(Y AXIS) ----------------------- 16"
(Z AXIS) ----------------------- 5"
SADDLE WIDTH --------------------------- 38"
RAM STYLE ------------------------------ RIGID
KNEE TRAVEL ---------------------------- 12"
TABLE SIZE ----------------------------- 42" X 13"
NUMBER OF T-SLOTS ---------------------- 3
T-SLOT WIDTH --------------------------- 5/8"
SPINDLE NOSE TO TABLE (MAX) ------------ 17"
SPINDLE MOTOR -------------------------- 3 H.P.
CONTROL -------------------------------- CENTURION IV
SPINDLE SPEED (LOW) -------------------- 60-500 RPM
(HIGH) -------------------- 500-4200 RPM
SPINDLE TYPE --------------------------- NST 30
MAXIMUM TABLE LOAD --------------------- 1500 LBS.
THROAT --------------------------------- 14"
MACHINE WEIGHT ------------------------- 4,400 LBS.
VOLTAGE -------------------------------- 208-240 VOLT, 3 PHASE
--------------------------------------------------------------------------------
FEATURES
- AUTOMATIC SPINDLE BRAKE
- AUTOMATIC LUBRICATION
--------------------------------------------------------------------------------
EQUIPPED WITH
- ELECTRONIC HANDWHEEL
- FLOOD COOLANT
- MONOCHROME CRT
- MANUAL SPINDLE SPEED
- 30K MEMORY STORAGE AREA
- HAAS 4TH AXIS ROTARY TABLE
- POWER DRAW BAR
--------------------------------------------------------------------------------
|
|
| Ad # 9545 | CNC Vertical Milling Machines w\o ATC |
| 2002 |
Birmingham |
B3VS |
Excellent |
Sold |
Photo /
More Info. |
| 60 X 12 table..TABLE LOAD 2000LBS: Very low hours Less than 4000 hrs.
·Heavy-duty meehanite castings
·Hardened & ground square ways
·Turcite-coated surfaces
·Easy to use control with Built in Mastercam2
·Auto lubrication
·Power draw bar
·Halogen work light
·Coolant system
·Table top enclosure
·Base chip coolant drop pan
·220 Volt/3-Phase
·2200 lbs table load
·auto calibration of table weight
·Specifications: B3VS Specifications: B3VS Table size 12”x60" X Axis travel 41" Y Axis travel 20" Z Axis travel (Headstock travel) 23" Quill travel 5" Spindle RPM 130-5160 Spindle taper NTS 40, FIBER OPTICS Servo motors HP DC servo, Spindle motor HP 5 Programmable speeds CNC control Head design Tilt Cross ways Box Vertical ways Box Net weight 6,500 lbs.
·EXCELLENT CONDITION
·Can Be used Manual or run in full 3 axis CNC (LEARN TEACH)
·CONVERSATIONAL PROGRAMMING
Upgraded Centroid M400 Controller
Includes: G65 Sub’s and Macros, G84 Compression Tapping,
G54, G59 Work Coordinate System, G50, G51 Mirror and Scaling. (Options unlocked)
Engraving Software (Options unlocked)
Solid State Hard Drive
128 MB Ram
800 Mhz
Floppy Drive
RS-232, Ethernet
Inverter Drive System
Steel way cover on Y axis (Installed Options)
Rear Chip Guards (Installed Options)
MPG Electric Hand Wheel for X, Y, Z&4th (Installed Options)
Power Draw bar, Coolant System
Digitizing Probe & Software (Digitizing Software Package Options unlocked 0)
TT-1 for Auto Tool Measuring (Options unlocked)
Unlimited File Size Software (Options unlocked)
BobCadCam Design Software 3D
Laser Mapping of Ballscrews to .00007 linear and .00009 interpolation (Options unlocked)
ISO 1725 Certification
INTERCOM CONVERSATIONAL PROGRAMMING
2002 BIRMINGHAM BED MILL WITH CENTROID M-400 CONTROL
12X60 TABLE 40X20X23 TRAVEL
AUTO CALIBRATION FOR TABLE WEIGHT (TABLE LOAD 2200LBS)
PROGRAMMABLE SPEEDS 130 – 5200 RPMS
BUILT IN INTERCOM CONVERSATIONAL PROGRAMMING WITH MATH HELP AND AUTO RADIUS BLEND FUNCTIONS
COLOR LCD WITH GRAPHICS
CENTROID M-400 CONTROLLER UNLOCKS/OPTIONS INCLUDE:
UPGRADED MOTHER BOARD/800 MHZ. PROCESSOR/EXTRA FANS/USB SUPPORT
128 MEGS RAM
SERIAL PORT
PRINTER PORT
ETHERNET PORT
FLOPPY DRIVE
MOUSE PORT
SOLID STATE HD
UNLIMITED FILE SIZE NO DNC NECESSARY (UNLOCKED)
18 WORK COORDINATE OFFSETS (UNLOCKED)
MILLWRIGHT ENGRAVING BUILT IN W/DXF IMPORTING (UNLOCKED)
MASTERCAM BUILT IN (UNLOCKED)
THREAD MILLING (UNLOCKED)
CONVERSATIONAL PROGRAMMING (UNLOCKED)
PROBING (UNLOCKED)
DIGITIZING (UNLOCKED)
SCALING/MIRROR/ROTATION (UNLOCKED)
AUTO TOOL TOUCH (UNLOCKED)
READY FOR NEW SOFTWARE UPDATE (OPTION FROM CENTROID)
RIDGED TAPPING (NOT UNLOCKED “UNLOCK CODE AVAILABLE FROM CENTROID”)
5,850 LBS. GROSS WEIGHT
See options and videos at http://www.centroidcnc.com/accessories.htm
TOOLING FOR MILL:
Ø2 MATCHING D-675 KURT VISES
Ø2 HUOT TOOL RACKS W/ROLLING CART
Ø1 ENCO 0-1/4” TAPING HEAD W/1/2” SHANK
Ø1 TAPMATIC #6-1/2” TAPING HEAD W/1” SHANK
Ø20 EA. 40 TAPER TOOL HOLDERS TO INCLUDE:
Ø1 Integral ½” DEVLIEG MICRO-BORE
Ø2 DA-300 COLLET HOLDERS
Ø1 TG-100 COLLET HOLDER
Ø2 0-1/2” KEYLESS DRILL CHUCKS
Ø2 SHELL MILL HOLDERS (NEW NEVER USED)
Ø12 VARIOUS SIZE END MILL HOLDERS 3/16”TO 1”
ØALL MANUALS AND PROGRAMMING GUIDE
2000 Top-Turn 406 CNC Flat Bed Lathe
Purchased new in 2002
Less than 2000 hours
Model ………………………………………CNC 406
Distance Between Centers…………………34””
Max. Turning Length……………………...32”
Swing over Bed…………………………… 16”
Swing over cross slide…………………….. 7-7/8”
Cross slide travel………………………….. 8-1/4”
With of bed………………………………... 11-13/16”
Spindle nose………………………………. D1-6
Spindle hole………………………………. 2-1/4”
Taper of spindle………………………….. M.T. #6
Variable spindle speeds……………………HI 361-3000 LOW 5-360
Spindle motor………………………………7.5HP
Spindle diameter at front bearing……….. 3-5/16”
Longitudinal feed force……………………7.5Nm AC servo motor
Rapid motion speed………………………..Z 20 (DIA) 10 Pitch
Longitudinal traverse……………………...X 20 (DIA) /5 Pitch
Feed range………………………………….0-5/8” 0-15mm/rev
Thread pitch range……………………….. 0.004-15 ¾
Tail stock quill diameter…………………..M.T. #4
Positioning/repeatability ……………….…0.0008/12”
600 Pound bearing weight / dual headstock bearings
Fagor 8025 Controller (upgraded from 800T to new 8025 in 2005)
CONVERSATIONAL PROGRAMMING ,G Code or DNC
6,500 lbs. Gross weight
Ø1ea. 8” 3 JAW CHUCK W/KEY
Ø1ea. 12” 4 JAW CHUCK W/KEY
Ø1ea. 15” CAST IRON FACE PLATE
Ø1ea. BISON 5C COLLET CHUCK MOUNTED ON D1-6 PLATE W/KEY
Ø2ea. 3 BEARING STEADY RESTS
Ø1ea. 5/8 DRILL CHUCKS W/KEY FOR TAIL STOCK
Ø1ea. SKODA LIVE CENTER FOR TAIL STOCK
Ø2 SPEED MANUAL TAIL STOCK #4 MT
ØADDED UP FRONT RS232 PORT
Ø25 ASSORTED NEW AND USED 5C COLLETS
Ø1 5C COLLET RACK
ØDNC AND OFF LINE FILE TRANSFER SOFTWARE
ØALL MANUALS AND DOCUMENTATIONS
KB36 VERTICAL BAND SAW
ØTHROAT 14”
ØWORK HEIGHT 9 1/16”
ØTABLE SIZE 19 ½ 15 ¼
ØTABLE TILTS 4 WAYS
ØVARIABLE SPEED 65-295
ØBLADES 1/8 – 5/8
Ø220 SINGLE
Ø1 HP
Ø628 LBS. Gross (net weight 551lbs)
Ø2 TABLES (1 NEW NEVER USED 1 GROOVED TABLE FOR MITER WAS OPTION)
ØMITER (WAS OPTION)
ØFENCE (WAS OPTION)
ØWORK LAMP
ØTILTING TABLE
ØBLADE SHEAR
ØBUILT IN BLADE AND TIRE CLEANING BRUSH
ØAIR CHIP REMOVER
ØBUILT IN WELDER/ANNEALING AND GRINDER W/LIGHT 1/8”-5/8”
ØAPPOX. 30 FEET MIXED BLADE STOCK
ØTOOL KIT
ØALL MANUALS
Ø
ALSO AVAILABLE:
ØPALMGREN 2-TON ARBOR PRESS
ØCYCLONE PK36 SAND BLASTER W/STAND, MEDIA AND EXTRA REPLACEABLE SHIELD PROCTORS, EXTRA GUN TIPS
ØPORTER CABLE C7550 80GAL. 2-STAGE 6HP. OIL LUBE AIR COMPRESSOR 175psi 220 SINGLE
Ø2’X3’ GRANITE SURFACE PLATE W/STAND
ØENCO 24” HEIGHT GAUGE
Ø12”X9”X8” SLOTTED ANGLE PLATES
ØINSPECTION GAUGE PINS SETS FROM .061 TO .750 “-0002” (COMPLETE SETS IN 4 WOOD/PLASTIC BOXES SOME STILL IN WRAPPERS)
ØLOTS OF ALUMINUM STOCK ALL 6061 T6
Ø2 EA. 1”X12”X12”
Ø1 EA. 3/8”X12”X12”
Ø15 EA. 6’X1”dia. X 3/16” WALL TUBING (ALUM.)
Ø1ea. ¼”X2”X4’
Ø2ea. ¼”x6”X4’
ØMISCELLANIES LOTS OF ALUMINUM PLASTICS IN SQUARE /ROUND / PLATE STOCK MOST 3 FEET AND LONGER
I have been a Machinist for over 35 years and all machines are well maintained and never pushed or crashed. Most work done was on 6061 T6 Aluminum, Delrin and PVC III, we were a Research and Development company specializing in one offs, models and Reverse Engineering that is why we chose these machines for their ease of use and being able to run manual or full CNC, Mills probing and part digitizing is totaling amazing and can duplicate and define compound angles and radius’s and Probing results can be instantly duplicated of downloaded for off line Cad modifications (see demo at http://www.centroidcnc.com/cncvideo/video_3d_dig.html ). I Purchased all machines and tooling new. Lathe http://www.taipeitradeshows.com.tw/product_info.shtml?comno=97543590&showno=NSC1007&docno=33830
|
|
| Ad # 9536 | CNC Vertical Milling Machines w\o ATC |
| 1988 |
Taurus |
Bridge Mill |
Good |
Sold |
Photo /
More Info. |
| —: 1988) (Retrofitted control 2006 rebuilt ballscrew 2005)
TAURUS BRIDGE MILL
TRAVELS: X= 168"
Y= 132"
Z=60"
W QUILL= 12"
TABLE: 180" X 96"
VERTICAL DAYLIGHT: 72"
X,Y,Z RAPID 400 IPM
SPINDLE MOTOR: 50 HP
SPINDLE SPEED: 0 to 1950 RPM
SPINDLE TAPER: 50
CONTROL: TAURUS TP i2000 (2006)
TABLE CAPACITY: 60,000 LBS.
TOTAL WEIGHT: 100,000.00 LBS.
HOLDING CLOSE TOLERENCES: .001/.002
UNDER POWER IN MICHIGAN
|
|
| Ad # 9488 | CNC Vertical Milling Machines w\o ATC |
| 1993 |
Tree |
310 |
Very Good |
Sold |
Photo /
More Info. |
| 3 axis -10 x 44 table knee mill: 3 Axis Dynapath Autocon Control,
10x44 table,
27x, 14y Travel,5"Z,
#30 Taper,
Delta 20 control
2H.P.
V.S 60-4200
rpms |
|
| Ad # 12364 | CNC Vertical Milling Machines w\o ATC |
| — |
millport |
3 hp |
Excellent |
sold |
Photo /
More Info. |
| —: Millport, 3 AXIS CNC MILLING MACHIN
3 AXIS WITH SOUTHWEST CONTROL |
|
| Ad # 9386 | CNC Vertical Milling Machines w\o ATC |
| 1996 |
Mighty USA |
Comet MV-6 |
Fair |
Sold |
Photo /
More Info. |
| 40 x 20 travels: This machine has travel of X-axis: 40", Y-axis: 20", and Z-axis: 20".
Max Table Load is 1000lbs.
The Spindle runs upto 5000rpm.
We can assist with loading for $400.
That is what the rental forklift will cost us. |
|
| Ad # 16153 | CNC Vertical Milling Machines w\o ATC |
| — |
Clausing Kondia |
FV-1 |
Good |
sold |
Photo /
More Info. |
| 9" x 48": Claising kondia fv-1
Currently in operation - very good working condition
Upgraded 2017 Proto Trak SM Control
Kurt Power Lock Draw Bar
*Vice NOT included |
|
| Ad # 14018 | CNC Vertical Milling Machines w\o ATC |
| — |
Bridgeport |
V2XT |
Good |
sold |
Photo /
More Info. |
| 3 Axis :9" x 49": Bridgeport 2XT
DX-32 Control
X AXIS TRAVEL 25"
Y AXIS TRAVEL 12"
Z AXIS TRAVEL 5"
THROAT DISTANCE 20.9"
RAPID TRAVERSE RATE X & Y AXES 250 IPM
CUTTING FEED RATE ALL AXES 0.1 - 250 IPM
SPINDLE SPEEDS 60 - 4,200 RPM
SPINDLE MOTOR 3 HP
APPROX. DIMENSIONS 62" x 60" x 104"
APPROX. WEIGHT 3,000 LBS |
|
| Ad # 7282 | CNC Vertical Milling Machines w\o ATC |
| 1990 |
Lagun |
Lagunmatic 320 |
Good |
Sold |
Photo /
More Info. |
| 32" x 14" LAgunamatic CNC Knee Mill: Power Knee
Programable Speed Spindle
Conversational Programming
Indexer Interface
X= 32"
Y= 14"
Z= 6"
4200-4250 RPM Low
4530 RPM High
5 HP Motor 7.5 Peak HP
DWG NO. 81701-01
Full Load 20 Amps
|
|
| Ad # 7234 | CNC Vertical Milling Machines w\o ATC |
| 1997 |
BRIDGEPORT |
Series II TRAKAGE2-2 axis |
Very Good |
sold |
Photo /
More Info. |
| 4 H.P. Series II BRIDGEPORT Variable speed Vertical Mill-TRAK AGE2: 4 H.P. Series II BRIDGEPORT Variable speed Vertical Mill with TRAK AGE2-2-a... |
|
| Ad # 7222 | CNC Vertical Milling Machines w\o ATC |
| 1995 |
CHEVALIER |
FM-33H |
Very Good |
Sold |
Photo /
More Info. |
| CHEVALIER FM-33H 3-axes CNC vertical knee mill: CHEVALIER FM-33H 3-axes CNC vertical knee mill
Ridgid style head (no swivel)
Table working surface 10” x 50”
Range:
X-axis 28”
Y-axis 15”
Vertical quill travel 5”
No. 30 spindle taper with power draw-bar
Variable spindle speeds 60-4500 RPM
EQUIPPED WITH:
Kurt pneumatic draw-bar
(1) No. 30 toolholder
Mist coolant
Auto lubrication
Adjustable chip guard
Manual vertical adjustment of knee
Hardened box type ways
Work light
3 H.P. spindle drive
Anilam 1100 3-axes CNC control with CRT, RS232 port, Quick-link DNC8 port hub, floppy disc |
|
| Ad # 7223 | CNC Vertical Milling Machines w\o ATC |
| 1997 |
BRIDGEPORT |
Series 1, EZ-TRAK DX |
Excellent |
Sold |
Photo /
More Info. |
| Series I BRIDGEPORT 2-axis CNC Vertical Mill with 3-axis DRO: Series I BRIDGEPORT 2-axis CNC Vertical Milling Machine with 3-axis digital... |
|
| Ad # 7220 | CNC Vertical Milling Machines w\o ATC |
| 1983 |
RAMBAUDI |
600DT4 |
Excellent |
sold |
Photo /
More Info. |
| 600DT4 RAMBAUDI Ram-Matic 4-Spindle, 3-axes CNC Vertical Duplicating M: Mdl. 600DT4 RAMBAUDI Ram-Matic 4-Spindle, 3-axes CNC Vertical Duplicating M... |
|
| Ad # 7215 | CNC Vertical Milling Machines w\o ATC |
| 1991 |
LAGUN |
FTV-3S |
Very Good |
Sold |
Photo /
More Info. |
| LAGUN FTV-25 3-axes CNC vertical knee mill: LAGUN FTV-25 3-axes CNC vertical knee mill
Swivel type head design
Table working surface 10” x 50”
Range:
X-axis 26”
Y-axis 15”
R-8 spindle taper with power draw-bar
Variable spindle speeds to 4200 RPM
(3) spindle feeds .0015, .003, .006 IPR
Horizontal adjustment of ram 22”
EQUIPPED WITH:
Kurt pneumatic draw-bar
Chrome ways
Mist coolant
Manual vertical adjustment of knee
3 H.P. spindle drive
Anilam 1100M 3-axes CNC control with CRT, RS 232 port, floppy disc |
|
| Ad # 7216 | CNC Vertical Milling Machines w\o ATC |
| 1997 |
CHEVALIER |
FM-32K |
Excellent |
sold |
Photo /
More Info. |
| CHEVALIER Two-Axis CNC/Three-Axis Manual Vertical Mill, Model FM-32K: CHEVALIER Two-Axis CNC/Three-Axis Manual Vertical Mill, Model FM-32K
Table working surface 10" x 50"
Number of t-slots 3
Range: longitudinal (x) 30"
cross (y) 14"
vertical, knee 15"
Quill (z) 5"
Ram travel 12"
Head tilt, left and right 90 degrees
Head tilt, front to rear, each way 45 degrees
(3) Power quill feeds .0015, .003, .006 I.P.R.
Infinitely variable spindle speeds, 60-550 R.P.M. & 500-4,500 R.P.M.
two ranges
Spindle taper R-8
Maximum collet capacity 3/4"
EQUIPPED WITH:
#3200 MK ANILAM two-axis CNC control with CRT, RS-232 interface, Graphic
Menu, and Teach Mode
Two-axis digital readout during manual operations
X & Y axes ball screws
SEM DC servo motors on both X & Y axes
Dovetail-type hard ways
ISHAN pressurized lubrication system with timer
Flood coolant pump located in machine column
Assortment of #R8 collets
#3200 MK CHEVALIER part programming and operations manual
3 H.P. 3/60/230-460 volt spindle drive motor and electrical controls |
|
| Ad # 7214 | CNC Vertical Milling Machines w\o ATC |
| 1991 |
HURCO |
KM3P |
Very Good |
sold |
Photo /
More Info. |
| HURCO Model #KM3P 3-axis CNC Knee-Type Vertical Mill: HURCO Model #KM3P 3-axis CNC Knee-Type Vertical Mill
Table Size 14” x 49”
T-slots 3 x 0.625” on 2.95” centers
Table load 750 lbs.
X-axis travel (longitudinal) 24”
Y-axis travel (cross table) 14”
Z-axis travel (quill) 5”
Knee travel (manual) 15.5”
Ram travel 14”
Spindle motor 3 H.P.
Spindle speeds 60-499 RPM (low)
500-4,000 RPM (high)
Transmission 2-speed back gear with manual change
Spindle nose to table distance 17.25” (maximum)
Tapping capacity 7/8”
Drilling capacity (mild steel) ¾”
Milling capacity (mild steel) 2.5 cubic inches/minute
Maximum cutting federate 150 IPM
Rapid federates 0.1-250 IPM
EQUIPPED WITH:
Ultimax II Split Screen CNC Control (8.5 software version)
Universal #200 Kwik-Switch spindle
Approximately 28 toolholders |
|
| Ad # 7219 | CNC Vertical Milling Machines w\o ATC |
| 1990 |
HURCO |
KM5P |
Excellent |
Sold |
Photo /
More Info. |
| Model KM5P HURCO Ridgid Ram 3-axes CNC Vertical Knee-Type Mill: Model KM5P HURCO Ridgid Ram 3-axes CNC Vertical Knee-Type Mill(Hour usage m... |
|
| Ad # 15988 | CNC Vertical Milling Machines w\o ATC |
| 1996 |
Chevelier |
FM-32SP |
Excellent |
sold |
Photo /
More Info. |
| 9 X 42 : Chevalier 3 axis milling machine with Proto Trak M3.Equipped with coolant a... |
|
| Ad # 11893 | CNC Vertical Milling Machines w\o ATC |
| 2005 |
Haas |
TM-1 |
New |
sold |
Photo /
More Info. |
| Travel X 30" Y 12" Z 16": XYZ travels 30" x 12" x 16"
7.5 hp vector drive
4000 rpm spindle
CT-40 taper
1 or 3 phase power
Table, 47.75" x 10.5", 1000 lb. max weight
Rapid and max. feed, 200 ipm
manual tool change.
New coolant pump and tank. Still in box!
3.5 disk drive, new in box.
Rigid tapping
Full table chip guard.
Manual
Conversational programming
15" color monitor |
|
