Your search results (if any) appear below in groups of 75 for each section.
Sawing Equipment
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1990 Make - Amada Model - HA-250W
Mouseover Thumbnails to Enlarge
Price:$7995.00 USD
Category:Fully Automatic Horizontal Band Saw Capacity: 10" rounds
Ad #16180
Year:
1990
Make:
Amada
Model:
HA-250W
Condition:
Good
Electrical:
230/460/3 wired 230
Machine Status:
Not Under Power
Shipping Info:
We can load
Weight:
3300 lbs
Dimension: L x W x H
76.5″ x 93.1″ x 69.8″ High
Machine Location:
City:
On Request
State:
North Carolina
Country:
USA
Price:
$7995.00 USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
1990 Amada HA-250W Fully automatic Horizontal band saw w/ shuttle infeed Autop or manual operation modes Hyd. auto clamping Capacity round/sq:10"x10"at90 deg min:1.18" capacity recrtangle:11 x 10" at 90 deg stroke shuttle: 15.75in w/9 indexes times remnant length: 2.24" plus length of parts Blade Speed: 89-295 ft./min, 60 Hz Stepless motor: 5HP blade :11'-6" 1.250" coolant chip conveyor wired 220/3
Std. mfg specs below... Saw Head Frame The Rigid ‘C’ section frame carries the mountings for the two band wheels, heavy-duty worm drive gear reducer, the band drive motor, and saw guide arm mounting supports. Band Wheels & Drive System The band wheels are cast iron for long, productive life. The deflection free 1.38 inch (35 mm.) wheel spindles ensure the wheels run true regardless of tension stress or cutting loads. The spindle assemblies incorporate tapered roller bearings for greater rigidity and long service life. The wheel tracks the blade so that the back of the band is contacts the wheel flanges to support the band. The drive motor is coupled to the transmission through a variable speed pulley. Drive Wheel Transmission The drive wheel transmission is designed and built by Amada to provide high efficiency speed reduction, which requires no external cooling, to deliver more power to the large diameter drive shaft. This shaft ensures that this developed torque is transferred to the blade with no strobing, enabling the machine to efficiently cut high alloys as well as free machining materials. Pressure/Flow Feed Control The independent pressure and flow controls in series ensure the optimum cutting rate can be obtained regardless of section or alloy being cut. The pressure control determines the cutting force applied to the blade and the flow control sets the maximum fall rate of the head. For example for difficult to machine materials the pressure is set higher than free machining alloys and the flow is set lower, as shown on the escutcheons above the above the control knobs. Idler Wheel Motion Detector The wheel motion detector will turn off the blade drive in the case where a blade breaks or is jammed in the work piece. This feature also prevents premature wear on the drive wheel from a stalled band. Automatic, Powered Chip Conveyor
The electrically powered chip conveyor auger automatically removes the saw chips from the saw while draining the cutting fluid back into the fluid reservoir. The automatic chip conveyor greatly reduces cleanup time and enables the machine to run longer without operator cleanup.
Multiple Index The machine control has the capability to make up to 9 index passes giving a maximum cut length of 141.7 in. (3,600 mm.) in automatic. Split Front Vise The work holding vise is split so that it clamps the workpiece on both sides of the cutting plane. This additional support in front of the cutting plane minimizes the burr on the cut pieces.
***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.