Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
Vectrax MSC 3 Axis CNC Knee Mill w/updated Centroid M15 Conversational Control w/manual teach in operation mode.
CLOSING OUR WAREHOUSE - ALL OFFERS WILL BE CONSIDERED!
We are CentroidRepairs and we service all models of Centroid controls. This control has been serviced and updated and is ready for work!
Vectrax/Remedy 3 Axis CNC Knee Mill. Serviced & Updated Centroid M15 control with Linux, (2)USB ports, clear LCD and all systems have been checked & serviced. This Machine has 5 Quill travel & 16 manual knee travel & Power Draw bar. Heavy duty Square Box Ways on the Y axis allow accurate heavy duty machining of more difficult to cut materials.
MACHINE TRAVEL AND TABLE: X Axis: 30" Y Axis: 12.75 Z Axis:4.9 Quill Table Size: 9 x 49 with (3) T Slots: 5/8" Max. Table Load: 700 Lbs. Area Req.: 61 deep x 116 Wide x 86" tall This machine will fit through a 79 garage door X,Y and Z Axis DRO: Standard Manual Operation & Teach in cycles Y axis Way Covers (Rubber) Front and Rear Machine Casting Weight: 3000 lbs. Base Coolant ready: No coolant pump
SPINDLE and HEAD: Spindle Motor: 3 HP 208-240 VAC 3 Ph. 30 Amp. Spindle Speeds: Low 80-1200 High 600-4500 Tooling: R8 Tooling
CENTROID M15 : Very Easy To use Control Intercon Conversational Programming System Graphics Math Help. Pictorial help with your program. Automatic Mill Round or Rectangular Pockets, Frame Mill and Lines and Arcs, Graphics 2D and 3D Face Mill and Thread Milling, SUB-repeat of programmed events Cutter compensation: 200 sets both Height and Diameter Drilling cycles Multiple types: Deep hole, Peck drill, Bolt Hole and Line hole drilling
SOFTWARE AND HARDWARE OPTIONS: Get the full list of Software available at our website.
F.O.B.: Hatfield, PA. 19440 Ready for shipment.
Optional Items: Work-holding: Table accepts all standard systems, we have new & used Table Vices available
TRAINING: Optional item ECEDM can provide basic phone training at only by Iphone video chat.
***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
Showroom Demo Machining Center: Atrump Maxi-Mill E216 Mill Special $42,500 This machine has not made any chips.
Description: This machine is in brand new condition, it is on the original metal shipping skid, all original shipping locks are present and it is clean and plastic wrapped. It is under power and can be seen in operation either in person or by doing a Iphone video call Demonstration.
We are closing our warehouse and all offers will be considered.
Centroid M400 control with 15 LCD with Industrial PC Conversational Programming & Fanuc G-Code compatible. 16 Station Carousel ATC 7.5 HP Spindle Motor, CAT40 Spindle, 6,000 RPM programmable spindle speed. Delta Axis Motors and drives. Delta Spindle inverter. Double nut precision ball screws FC30 Meehanite Casting Base, Column and Head, annealed and stress relieved for long term reliability. Box ways design on Y axis to provide maximum rigidity Steel way covers on all three axes
CNC Control Centroid M400 Windows based, Easy to use Conversational programming, and creates Fanuc compatible G-Code, 6 Gig Solid state memory, and multiple USB ports and network capability. Large 15 color LCD Screen with 3D Color graphics. 6 Zero points
Request our Centroid Control data sheet to see all of the other standard Centroid Control features.
Specifications: Table:14.2 x 34.4 X axis Travel: 26 Y Axis travel: 16.1 Vertical travel: 20.1 Load capacity: 900 lbs. Spindle taper: CAT40 Spindle Speed: 6000 rpm Spindle center to column: 17.7 Automatic Tool Changer No. of tools:16
Motors: Spindle motor: 7.5 HP Feed motors XYZ: AC Delta 1 KW Closed Loop Power requirement:14 KVA, 3 Ph 220 VAC Area (LxDxH): 86 x 90 x 98.5 Net Weight: 5,570 lbs.
***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
High Speed Machining Center: VXT-1 Brand New Control and rebuilt machine tool.
Closing our warehouse - Price LOWERED all offers will be considered. Call me for updated special deals
Now available this rebuilt and unique High Speed Machining Center. New Centroid industrial control with a compact and ergonomic design. The machine incorporates a very stable Polymer machine base, solid metal enclosure, high speed swing arm ATC, and a full 3 axis industrial Centroid CNC control. This machine is ready for your inspection and demonstration.
MACHINE FEATURES: Centroid M400 Industrial control with Conversational Programming & 15 LCD Kit 103974 Intercon makes and runs Fanuc style G-Codes (Works w/all Cad-Cam Systems) 12 Station Swing arm ATC 1.55 HP Spindle Motor, CAT10 Taper tooling 20,000 rpm Liquid chilled Programmable spindle Yaskawa Axis Motors and drives. Saftronics Spindle inverter Full metal enclosure Linear Guide ways X-Y-Z Precision ball screws hardened & ground for higher accuracy Semi-Rigid tapping Granite Polymer Base, Column and Head highly stable Way covers on all three axes Clear Plexiglas Side panels lift for easy access and chip removal
Specifications: Table:21 x 8 Longitudinal travel (X axis): 12" Cross travel (Y axis): 8 Vertical travel (Z axis): 9 Spindle nose to table top (D): 0.75-8.25 Spindle center to column front: 8.25 Load capacity: 220 lbs. Spindle taper: Cat 10 Spindle Speed, Programmable: 200-20,000 RPM Transmission of spindle & motor: Direct drive Rapid feed rate: X/Y: 275 ipm Z: 290 ipm Feed motors XYZ: Yaskawa AC 0.75 Kw Motors Spindle motor/max torque: 1.55 HP Spindle Coolant system: 0.3 HP Lubrication pump: 150 W Power requirement: 8 KVA, 3 Phase 208-230 V Automatic Tool Changer:12 Station Swing Arm Max. tool diameter: 2.0
Machine Tool Width x Depth x Height: 41 x 50 x 75 Machine tool/Chiller/Cart Weight:900/125/175 lbs. Centroid CNC Industrial w/ Centroid Software Windows based High Speed Industrial PC, w/Large industrial color LCD screen, Color graphics, multiple USB ports. Easy to use Conversational programming, with teach in cycles, creates Fanuc compatible G-codes, 8 Gig Solid state memory - High speed contouring, backlash compensation, pitch error compensation
Get all of the Control facts from our website
SOFTWARE AND HARDWARE OPTIONS: Get the full list of Software and Hardware available.
***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
CLOSING OUR WAREHOUSE - DISCOUNT SALE Vectrax 3 Axis CNC Knee Mill w/updated Centroid M15-5 Control K-4206 w/manual teach in operation mode.
We are the #1 Centroid control service center updating and servicing All model Centroid Controls. This control has been serviced and updated.
Vectrax 3 Axis CNC Knee Mill. Remedy serviced & updated Centroid M15 control, 3.5 Floppy, 10.4 Clear LCD Motors and drives tuned, touch up paint, Control arm remounting, and all control wiring was rerouted for durability during Remedy servicing.
This Machine has 4.2 inches of Quill travel & 16 manual Knee Travel and R8 spindle taper. Heavy duty Square Box Ways on the Y axis allow accurate HD machining of more difficult to cut materials.
Included Software options: Intercon, Cutter Comp, Drilling cycles,tapping, Millright engraving.
GENERAL DESCRIPTION: CNC Knee Type Milling Machine w/Meehanite Casting Machine Casting Weight:2500 lbs. Aprox. Operational Area: 116 W X 68 Deep Machine Height:89 inches (79 casting fits through a garage door) Square Box Y axis Ways Dovetail Ways X Axis Hardened/Ground Ball Screws: X, Y & Z Axes Base Coolant ready: No coolant pump
MACHINE TRAVEL AND TABLE: X Axis: 29 Y Axis: 11 Z Axis: 4.2 Quill Knee: 15 Table Size: 9 x 49 with (3) T Slots: 5/8" Max. Table Load: 600 Lbs. Area Req.: 61 deep x 112" Wide x 86 tall This machine will fit through a garage door 79" X,Y and Z Axis DRO: Standard Manual Operation & Teach in cycles
SPINDLE and HEAD: Spindle: 3 HP 208-240 VAC 3 Ph. 30 Amp. Spindle Speeds: Low 80-1200 High 600-4500 Tooling: R8 Tooling Power Requirements: 208-240 VAC 3 Ph.
CENTROID M15 : Very Easy To use Control Intercon Conversational Programming System Graphics Math Help. Pictorial help with your program. Automatic Mill Round or Rectangular Pockets Frame Mill and Lines and Arcs, Graphics 2D and 3D. Face Mill and Thread Milling, SUB- repeat of programmed events Cutter compensation: 200 sets Height and Diameter Drilling cycles: Deep hole, Peck drill, Bolt Hole and Line hole drilling
Optional Items: Spindle Tooling: R8 Taper collets Solid R8 holders are available
TRAINING: Phone training - Optional items Remedy can provide basic phone training offered by Iphone video chat is available.
***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
USED 2009 REMEDY B3FC CNC BED MILLING MACHINE w/ Centroid M400S - 3 Axis CNC Mill S/N:K20870
Used Atrump/Remedy B3FC 3 Axis CNC Bed Milling Machine Package: Programmable Spindle Speed, Full 3 Axis CNC Machine Manual Quill w/digital veneer and swivel Head Work Lamp, Auto Lubrication System and Lower Chip pan. Auto Lubrication System w/ Automatic Low oil Alarm Torque-Rite Power Draw Bar Installed (Air req.) Standard Manual Data Input (MDI) via Keyboard Limit Switches on all Axes and in both directions Programmable Coolant system with Flexible Nozzle
TABLE: Table Travels.. (X) 31.5 " x (Y) 16.0" x Head (Z) 20.10 x Quill 4.5" Table Size......10 x 50 Way Type..... Heavy Duty Square Box Ways on column and Y axis Ball Screws............Precision Ground Turcite B Lining on X & Y Axis
SPINDLE & HEAD: Swivel Head w/Manual Quill Spindle Motor.. 3 HP, 220 VAC 3 PH. Spindle Taper. ... NMTB-30 Programmable Spindle:....60-4000 RPM 2 Speed Head:.. Front and Back Gear, Machine Area: .... 112 (Wide) 77 (Deep) 85 (High) This machine can fit into a 79 door w/Z axis motor removed
CONTROL FEATURES: Centroid M-400S Control Very Easy to use Conversational or Fanuc G-code Control Linux Software Operating System Intercon Conversational Programming System w/15" Color LCD
We have New Table and spindle Tooling available Iphone chat and we can do a live demonstration of this machine for you.
***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.