 |
|
Contact E-Machinery.net
Phone: 716-481-7663
Fax: 1-716-896-4642
Place FREE Ad
Latest Additions
Chip Making Machinery
Fabrication Equipment
Non-Metal & Support Equip.
Ad Maintenance
Directory
Features
|
|
|
 |
|
Search ResultsYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 25 matching ads. Now displaying the remaining 25 ads.
| FOR SALE: Year - 1984 Make - Mori Seiki Model - SL-0B |
|---|
Price:
$8750.00 USD | Category: Turning Center 4 - 10 in. chuck
Capacity:
Ad # 16236
|
| Year:
| 1984
|
| Make:
| Mori Seiki
|
| Model:
| SL-0B
|
| Condition:
| Good
|
| Electrical:
| 460/3Phase
|
|
| Machine Status: |
|
| Shipping Info: |
|
| Weight: | 1045 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Indiana
|
Country:
|
USA
|
Price: |
$8750.00 USD |
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Mori Seiki SL-O
Model SL-OB
S/N 629
Manufactured 1984
Maximum Swing 180mm (7.08”)
Chuck Size152mm (6”)
Maximum Longitudinal Travel19mm (7.67”)
Maximum Work Diameter100mm (3.93”)
Maximum Cross Travel120mm (4.72”)
Height from Floor to Spindle C/L1,050mm (41.34”)
Spindle RPM4,500
Spindle NoseA2-5
Spindle Taper1/20
Hole Thru Spindle43mm (1.69”)
Bed Width: Overall335mm (13.19”)
Carriage320mm (12.60”)S
Slant Angle of Bed70 degrees
Turret Indexing Number8
Number of Turret Stations8
Main MotorAC3.7/5.5KW
Total Electric Capacity15KVA
CoolantYes
Tail StockNo
CNC ControllerFanuc System 3TC
Weight2,300kg. (1045#)
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 6920 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00620230-NA |
 |
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 2002 Make - Colchester Model - Storm 310 |
|---|
Price:
$10495.00 USD | Category: Turning Center 4 - 10 in. chuck
Capacity: 30 hp, 10" Chuck Colchester Storm 310 CNC Turning Center
Ad # 16013
|
| Year:
| 2002
|
| Make:
| Colchester
|
| Model:
| Storm 310
|
| Condition:
| Good
|
| Electrical:
| 230/3Phase
|
|
| Machine Status: | Not Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 7,275 lbs
|
| Dimension: L x W x H | 108" x 56" x 80" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price: |
$10495.00 USD |
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- CNC Control: GE/Fanuc Series 21i-T
Chuck Size: 10"
Max. Swing: 20.870"
Turning Diameter Max: 11.810"
Turning Length Max: 23.620"
Bar Capacity Std: 3.150"
Note: rigging/loading fee extra charge
Travels::
Max Feed Rapid Rate
X1: 12.000 in.591 ipm
Z1: 23.000 in.984 ipm
Tailstock: Standard
Quill Dia: 3.740"
Stroke: 4.920"
Quill Center: MT# 5
Body Travel: 19.090"
Spindle RPM: 4000 rpm
Spindle HP: 30.00 hp
Spindle Nose: A2-8
Spindle Bore: 3.560"
# Spindle Speed Ranges: 1
12 Station Turret
NOTE: Some tooling also available but
NOT
part
of machine price. Please enquire if
interested
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 25976 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00320200-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1985 Make - Okuma Model - LH-35N |
|---|
Price:
$24750.00 USD | Category: CNC Lathe w/sub Spindle or Live Tooling
Capacity: 2650 lbs between centers
Ad # 15995
|
| Year:
| 1985
|
| Make:
| Okuma
|
| Model:
| LH-35N
|
| Condition:
| Good
|
| Electrical:
| 33 kva
|
|
| Machine Status: | Not Under Power
|
| Shipping Info: | We can load
|
| Weight: | 12800 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
New York
|
Country:
|
USA
|
Price: |
$24750.00 USD |
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Okuma CNC Control Lathe:
Model LH35-N with OSP 5000LG CNC Control
Specifications/Capacities:
Swing of Bed Ways—24” (610mm)
Swing Over Cross Slide—13.75” (350mm)
Distance Between Centers—78.75” (2000mm)
Allowable Weight on Spindle:
(including chuck)
- Chucking—660 lbs.
- Between Centers—2650 lbs.
Spindle:
Type of Spindle—ASA-A2-8
Diameter of Spindle Bore—3.530” (90mm)
Speed Range—20 to 2200 RPM
Range of Speeds—4 Ranges/Stepless
Spindle Motor DC—20/30 HP cont/30 min.
Tailstock:
Diameter of Tailstock Quill—3.94” (100mm)
Taper of Quill—M.T. No. 5
General:
Power Requirement—33 kva
Weight—12,800 lbs (5800kg)
Standard Machine Accessories:
20/30 HP DC continuous/30 min. duty rated main spindle motor
Foot pedal for chuck operation
Hydraulic tailstock
Foundation leveling jack screws and washers
Machine Includes:
1- MMTS-LH Conv-2000 Chip Conveyor
1- Steady Rest 1.57 to 7.08 diameter Roller Type
1- Steady Rest Roller Type 7.08-11.02
3- MMTS-LH-35-S-55 I.D. Toolholders
1- Drill Sleeve MT No. 3
1- Boring Bar Sleeve 1”
1- MMTS-HOS-15-0002 Kitagawa 15” Chuck Model HOS-15 3 jaw thru-hole hydraulic chuck with one set of soft jaws (3” diameter thru chuck) 3-1/16” I.D. draw tube (2,200 rpm maximum operating speed)
1- IGF System (conversational programming)
1- Floppy Disc Program Storage
1- Set of 3 Hard Jaws HB 15 A1
1- Chip Conveyor
Miscellaneous Sets of Soft Jaws and Turning Tools
Note: Has RS232 Port for DNC Linkup Capabilities
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 25976 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00220200-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1994 Make - VDF BOEHRINGER Model - DUS 560 |
|---|
Price:
$16995.00 reduced USD | Category: Combination (teach lathe) CNC / Manual
Capacity:
Ad # 15977
|
| Year:
| 1994
|
| Make:
| VDF BOEHRINGER
|
| Model:
| DUS 560
|
| Condition:
| Good
|
| Electrical:
| 575/3
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Ontario
|
Country:
|
Canada
|
Price: |
$16995.00 reduced USD |
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- MACHINE DATA
Machine type - VDF BOEHRINGER DUS 560
Manufacturer - VDF BOEHRINGER
Model - DUS 560
Year of manufacture - 1994
Condition - ready for operation (used)
DESCRIPTION
Orbit diameter via slide: 365
Machine weight approx.: 5.6 t
Turning diameter: 345 mm
Max turning length: 1500 mm
Circulation diameter over bed: 570
Spindle speeds: 3 - 2,500 min/-1
Room requirements approx.: 6.0 x 2.5 x 2.0 m
Swing over saddle: 365
Cutting tool cross-section, per DIN 770 h x w:
mm 32 x 25
ADVANTAGES
Manual turning for single work pieces
Step-by-step working (Cycles) for small batch
sizes
CNC mode for larger batch sizes
State-of-the-art control Siemens Sinumerik
Note: software is french and german only bit can be upgraded to english for approx $2500;also 460/3 transformer included
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 25976 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
01220190-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 2001 Make - HAAS Model - SL-30T |
|---|
Price:
$34,990.00 USD | Category: Turning Center 4 - 10 in. chuck
Capacity: 10"
Ad # 15134
|
| Year:
| 2001
|
| Make:
| HAAS
|
| Model:
| SL-30T
|
| Condition:
| Good
|
| Electrical:
| 230/3Phase
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 16000
|
| Dimension: L x W x H | 162 x 77 x 74 |
Machine Location:
|
| City: |
On Request
|
| State: |
Texas
|
Country:
|
USA
|
Price: |
$34,990.00 USD |
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Specifications:
Swing over Bed 30
Swing over Cross Slide 20
Max Cutting Diameter 17
Max Cutting Length 39
X Axis 12.5
Z Axis 26
Rapid Rates (XZ) 945 ipm
Spindle Bore 3.0
Bar Capacity 2.5
Spindle Speed 20 - 3,400 rpm
Spindle Motor 30 hp.
Turret Capacity 12 Station (VDI)
Tailstock Taper MT #4
Machine Dimensions 162 x 77 x 74
Machine Weight 16,000 lbs.
Equipped With:
10 3 Jaw Hydraulic Chuck
Tool Presetter
Floppy Drive
2 Speed Gearbox
|
|
| http://youtu.be/OGeOGFLBJxU |
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 25976 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00320160-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1994 Make - okuma Model - cadet LNC-8 |
|---|
Price:
$12,795 USD | Category: Turning Center 4 - 10 in. chuck
Capacity:
Ad # 14699
|
| Year:
| 1994
|
| Make:
| okuma
|
| Model:
| cadet LNC-8
|
| Condition:
| Needs Work
|
| Electrical:
| 208/3Phase
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 9670
|
| Dimension: L x W x H | 8x8x6 |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price: |
$12,795 USD |
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Okuma Cadet LNC-8 lathe
•2 Axis
•10” Chuck
•12 Station Tool Changer
•2 ½ Bore
•Chip Conveyor
•New bearings in motor
•OSP5020L CNC Control
•OSP5020L/OSP500l-G Special Functions Manuals:Alarms & Error Manuals
Note: machine needs some work...see above
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 25976 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00720150-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1999 Make - CNC Enhancements Model - Auto bar 300 |
|---|
Price:
$3295.00 reduced USD | Category: CNC Lathe Part & Accessories
Capacity: Bar feeder:CAPACITY:1/4" - 3 1/8"
Ad # 14566
|
| Year:
| 1999
|
| Make:
| CNC Enhancements
|
| Model:
| Auto bar 300
|
| Condition:
| Excellent
|
| Electrical:
| 230/3Phase
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 800
|
| Dimension: L x W x H | 83" x 56" x 65" |
Machine Location:
|
| City: |
On Request
|
| State: |
Florida
|
Country:
|
USA
|
Price: |
$3295.00 reduced USD |
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- CNC Enhancements # AB-300 bar feeder
std specs below-please verify
MANUFACTURED...................1999
CAPACITY:1/4" - 3 1/8"
MAX. BAR LENGTH:52"
CONTROL:STANDARD BAR LOADER
DRIVE
POSITIONING SYSTEM:RODLESS AIR CYLINDER
LINEAR MOTION SLIDES:1 1/4" HEAVY DUTY
RAILS/BEARINGS:3/8" AND 3/4"
HEIGHT ADJUSTMENT:EASY CRANK HANDLE
MATERIAL TRAY ADJUSTMENT:EASY CRANK HANDLE
MATERIAL TRAY CAPACITY:22-1"BARS :7-3" BARS
AIR REQUIREMENTS:80 PSI AT 1 CFM
ELECTRICAL REQUIREMENTS:110 VOLTS/1 PHASE/2
AMPS
220 VOLTS/1 PHASE/1 AMP:440 VOLTS/1 PHASE/1/2
AMP
SPINDLE HEIGHT:28"MIN. - 55" MAX.
SPINDLE LINER:(1)
WEIGHT:800 LBS.
DIMENSIONS:83"W X 65"H X 56"D
note: very little use-like new: used on a
miyanp
BNC-20,very nice..includes 4 spare pushers shown
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 25976 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00320150-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1994? Make - Mazak Model - QT 8 |
|---|
Price:
$17,995.00 reduced USD | Category: Turning Center 4 - 10 in. chuck
Capacity: 8" chuck
Ad # 14492
|
| Year:
| 1994?
|
| Make:
| Mazak
|
| Model:
| QT 8
|
| Condition:
| Good
|
| Electrical:
| 230/3Phase
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 6000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price: |
$17,995.00 reduced USD |
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Mazak QT 8 cnc lathe
8" chuck
tool setter
tailstocl
mazatrol T2 control
chip conveyor
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 25976 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
01220140-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - Make - Emag Model - 4078390 |
|---|
Price:
$2,550 USD | Category: CNC Lathe Part & Accessories
Capacity: Live Tooling Holders VDI 40mm
Ad # 14354
|
| Year:
|
|
| Make:
| Emag
|
| Model:
| 4078390
|
| Condition:
| Good
|
| Electrical:
| Unknown
|
|
| Machine Status: | Not Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price: |
$2,550 USD | |
| General Description |
- Emag Live Tooling Holder
1- VDI 40mm Shank
# 40 78 390
Also included is Global CNC
VDI 40mm Shank tool holders 1"
Part numbers
22.4025 1" PT (4 holders)
32.4025 1" (4 holders)
41 4025 1" (2 Holders)
11 holders in total...like new quality
|
|
This Ad Has Been Viewed 25976 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
01020140-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1991 Make - Hyundai Model - Hi T 8G |
|---|
Price:
$7,495 USD | Category: Turning Center 4 - 10 in. chuck
Capacity:
Ad # 14206
|
| Year:
| 1991
|
| Make:
| Hyundai
|
| Model:
| Hi T 8G
|
| Condition:
| Needs Work
|
| Electrical:
| 230/3Phase
|
|
| Machine Status: | Not Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 6000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Tennessee
|
Country:
|
USA
|
Price: |
$7,495 USD |
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Hyundai Hi T 8G
Hirtol - 805 (Siemans Control)
1.75" Spindle Bore
6" Turning Dia.
Machine Length 6.3"
10HP
Chip Conveyor
Tool Prob.
Part Catcher
RS 232 Port
Machine has control Board out. Could be fixed.
Mechanically Machine is in good Shape.
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 25976 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00720140-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1997 Make - Mori Seiki Model - DL 20 |
|---|
Price:
$37,495 USD | Category: CNC Lathe w/sub Spindle or Live Tooling
Capacity:
Ad # 14160
|
| Year:
| 1997
|
| Make:
| Mori Seiki
|
| Model:
| DL 20
|
| Condition:
| Excellent
|
|
| Machine Status: | Not Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 16600
|
| Dimension: L x W x H | 185 x 82 x 85 |
Machine Location:
|
| City: |
On Request
|
| State: |
Michigan
|
Country:
|
USA
|
Price: |
$37,495 USD |
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 1997 Mori Seiki DL 20 Twin Spindle Lathe
(FANUC 16T) CNC Control.
Max Diameter Bar Capacity-2" / 1.63",
Max Swing Over Bed-11" / 11.8",
Max Turning Diameter-9.4",
Max Machining Length-9.06" / 4.72",
Distance Between Spindles-42.9",
Main Motor-15 HP,
Spindle Speed-40 - 4000 RPM,
Tools 12 (2 Turrets),
Spindle Bore (Left / Right)-2.0",
Spindle Nose-A2-6,
X-Axis Travel (Left / Right)-7.3" / 8.9", Z-Axis Travel (Left /
Right)-10.8" / 32.3"
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 25976 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00620140-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1997 Make - Daewoo Model - Puma 250 LB |
|---|
Price:
$29,995 reduced! USD | Category: Turning Center 11 in. & over chuck
Capacity: 2.75" Spindle Bore 14" x 40"
Ad # 14146
|
| Year:
| 1997
|
| Make:
| Daewoo
|
| Model:
| Puma 250 LB
|
| Condition:
| Good
|
| Electrical:
| 230/3Phase
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Texas
|
Country:
|
USA
|
Price: |
$29,995 reduced! USD |
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Daewoo
1997 Puma 250 LB,
Meldas 520 Control,
12" Kitigawa Chuck,
2.75" thru bore,
14" cutting dia.,
40" Z length,
10 station turret,
Tailstock, Chip Conveyor.
Everything works great except the tool setter. It
did not work when I got it and just never needed
to have it fixed.
Getting rid of it to buy a bigger, longer
machine.
Very fast, accurate, and quiet. We can start it
up
in the morning and cut a .002 tolerance all day.
It will push a 2.562" spade drill. (that's as big
as I've needed to go) It only ran 80% spindle
load.
The control is very easy. Runs very much like a
FANUC. I will give you programs too see the
difference.
Very good, reliable machine. I just need more and
have no space to keep this one.
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 25976 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00620140-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1987 Make - Ernault-Toyoda Model - HES TYPE 600 2-AXIS |
|---|
Price:
$35,500.00 reduced USD | Category: Turning Center 11 in. & over chuck
Capacity: X 14-3/4”, Z 64”
Ad # 13842
|
| Year:
| 1987
|
| Make:
| Ernault-Toyoda
|
| Model:
| HES TYPE 600 2-AXIS
|
| Condition:
| Excellent
|
| Electrical:
| Unknown
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 17,900
|
| Dimension: L x W x H | 175" x 110" x 84" |
Machine Location:
|
| City: |
On Request
|
| State: |
Ohio
|
Country:
|
USA
|
Price: |
$35,500.00 reduced USD | |
| General Description |
- 1987 – ERNAULT-TOYODA/HES TYPE 600 2-AXIS CNC TURNING CENTER
S/N 60137 (1987)
Swing Over Bed 24”
Distance C.C. 64”
Travels: X 14-3/4”, Z 64”
Spindle Speeds 28 to 2300 RPM
Rapid Traverse 320 IPM
Hole Thru Spindle 4”
14” 3-Jaw Power Chuck
12-Position Turret
Hydraulic Tailstock
General Numeric/Fanuc GN10 2-Axis CNC Control CRT
Mayfran International Chip-Tote Chip Conveyor
Coolant System
Enclosure
Weight 17,900 Lbs.
175" x 110" x 84"
|
|
This Ad Has Been Viewed 25976 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00320140-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1998 Make - CNC Enhancements Model - AB-400 |
|---|
Price:
$2795.00 reduced USD | Category: CNC Lathe Part & Accessories
Capacity: bar feeder :1/4"-4"
Ad # 13786
|
| Year:
| 1998
|
| Make:
| CNC Enhancements
|
| Model:
| AB-400
|
| Condition:
| Excellent
|
| Electrical:
| 230/3Phase
|
|
| Machine Status: | Not Under Power
|
| Shipping Info: | We can load
|
| Weight: | 1,500 lbs
|
| Dimension: L x W x H | 92" x 65" x 81" |
Machine Location:
|
| City: |
On Request
|
| State: |
Florida
|
Country:
|
USA
|
Price: |
$2795.00 reduced USD |
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- CNC Enhancements
Model: Autobar 400
Was on mori seiki SL200
Round Bar Diameter Capacity .. 1/4" to 4" Range
Maximum Feed Length For Bars.. 60"
Height Floor to Feed Guide (Adjustable 28" - 55"
Barstock Shape.. Round or Hex
Material Tray Capacity w/ 1" Bars.. 42 Bars
Material Tray Capacity w/ 4" Bars..10 Bars
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 52370 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00220140-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1981 Make - Mazak Model - M4 |
|---|
Price:
$14,995 USD | Category: Turning Center 11 in. & over chuck
Capacity: 22" x 60"
Ad # 13721
|
| Year:
| 1981
|
| Make:
| Mazak
|
| Model:
| M4
|
| Condition:
| Good
|
| Electrical:
| 230/3Phase
|
|
| Machine Status: | Not Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Ohio
|
Country:
|
USA
|
Price: |
$14,995 USD |
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Mazak M4
Control T1
SWING OVER BED : 22"
HIGHEST SPINDLE SPEED : 2501 - 3000 RPM
DISTANCE BETWEEN CENTERS : 31" - 40"
HOLE THRU SPINDLE : 3" 1/8" 80MM
12" Chuck.
Tail stock.
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 52370 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
01220130-� |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1993 Make - Okuma Model - LB 35 |
|---|
Price:
$29,995 USD | Category: Turning Center 11 in. & over chuck
Capacity: 28" x 32"
Ad # 13706
|
| Year:
| 1993
|
| Make:
| Okuma
|
| Model:
| LB 35
|
| Condition:
| Good
|
| Electrical:
| 230/460/3 wired 230
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 20,000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Georgia
|
Country:
|
USA
|
Price: |
$29,995 USD |
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Okuma LB 35
Control OSP 5020L CNC
3 Jaw 15" Chuck
Max Swing bed 28.38"
Max Swing SADDLE 16.93"
Max Turn Dia. 19.9"
Max Work Length 33.46"
X axis Travel 9.65" +3.35"
Z axis Travel 36.22"
Spindle Bore 4"
MaxBarCap. 3.2"
Spindle Speed 2 Speedgear range 14 - 499 and 500 – 1,000 RPM
Main Motor 40 HP
TURRET TYPE: V12
NUMBER OF TOOL STATIONS: 12 (I.D. OR O.D.)
SIZE OF O.D. TURNING TOOL: Ø 1.0" SQ WEDGE LOCK
SIZE OF I.D. TURNING TOOL: 2.0 ID Holders Base
RAPID TRAVERSE X and Z axis X = 591IPM Z= 787IPM
Z-THRUST 1,702 LBF NET CONTINUOUS
LIVE QUILL MT #5
Floor Space 157" W X 102" D
Weight 20,900 LBS
|
|
|
|
| Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 55971 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
01120130-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1985 Make - Traub Model - 240-S-1 |
|---|
Price:
$5995.00 reduced!! USD | Category: Turning Center 4 - 10 in. chuck
Capacity: Swing Diameter Above Cross Slide160 mm
Ad # 13020
|
| Year:
| 1985
|
| Make:
| Traub
|
| Model:
| 240-S-1
|
| Condition:
| Good
|
| Electrical:
| 460/3Phase
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | Requires rigger
|
| Weight: | 3500 Kg
|
| Dimension: L x W x H | 6' x 12'x 8' |
Machine Location:
|
| City: |
On Request
|
| State: |
Virginia
|
Country:
|
USA
|
Price: |
$5995.00 reduced!! USD |
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 1985 Traub Turning Center TND 360
Swing Dia. Above Bed 360 mm
Swing Dia. Above Cross Slide 160 mm
Center Distance 800 mm
Carriage Traverse, Longitudinal 810 mm
Carriage Traverse, Transverse 205 mm
Main Spindle:
Spindle Bore Dia. (max. bar dia) 60 mm
Spindle Nose Size A6/DIN 55026
Chuck Dia. 200 mm
Bearing Dia. (IN Front Bearing) 110 mm
Main Drive:
DC Motor With Reduction Gearbox:
Rating 27 Kw
Transmission Stages: 2
Speed Range: 7-3150 (Programable In Stepless Increments
Max. Speed, Stage one 800 RPM
Max Speed, Stage two 3150
Max. Torque:
Stage One :630 Nm
Stage Two: 150 Nm
Feed Drive:
Contouring Rate:
Rapid Traverse 10,000 mm/min
Feed 10,000 mm/min
Feed Thrust:
X Axis 5000 N
Z Axis 8000 N
Tool Carrier:
Number Of Tool Registers 8
External Tool Register: 25x25/110 Long
Internal Tools: Direct Register Bolted On Toolholders 20 Dia./25/32 MT 2/3/4
Indexing Time (Direction Logic)1 Sec. (1 Station)
Tailstock:
Quill Dia. 85 mm
Quill Stroke (Hydraulic) 110 mm
Quill Thrust N Up To 9000
Quill Register MT5 / DIN229
Steady (Hydraulic,Self Centering)
Fixed Steady:
Dia. Capacity Range 12-55 mm
Traveling Steady:
Dia. Capacity Range 15-55 mm
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 55971 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
01220120-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 80s Make - Pratt & Whitney Model - Turn Mate |
|---|
Price:
$2,995 ea. USD | Category: Turning Center 4 - 10 in. chuck
Capacity: 8" x 15"capacity
Ad # 12976
|
| Year:
| 80s
|
| Make:
| Pratt & Whitney
|
| Model:
| Turn Mate
|
| Condition:
| Good
|
| Electrical:
| 230/460/3 wired 230
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 4000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Georgia
|
Country:
|
USA
|
Price: |
$2,995 ea. USD |
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Pratt & Whitney Turn Mate
capacity:8" x 15"
Control Fanuc System 6T
3 Jaw 8" Chuck
Travles 6" x 16"
4 Station Tool Holder,no tooling included
220/3 Phase Wired
2 alike available
Great Small Lathe Two identical Machines available.
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 55971 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
01220120-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1950s Make - Axelson Model - SMD121 |
|---|
Price:
$8750.00 USD | Category: Turning Center 11 in. & over chuck
Capacity: 32 swingx72
Ad # 12811
|
| Year:
| 1950s
|
| Make:
| Axelson
|
| Model:
| SMD121
|
| Condition:
| Good
|
| Electrical:
| 230/3Phase
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 10,000
|
| Dimension: L x W x H | 20'x6'x8' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price: |
$8750.00 USD |
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- used Axelson SMD121
34" swing over bed ways
72" centers
6-750 rpm
10hp
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 55971 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
01020120-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - Make - FMB Model - Mini Turbo |
|---|
Price:
$5,750 USD | Category: CNC Lathe Part & Accessories
Capacity: 3/4" x 12ft Bar Feed
Ad # 12058
|
| Year:
|
|
| Make:
| FMB
|
| Model:
| Mini Turbo
|
| Condition:
| Excellent
|
| Electrical:
| Unknown
|
|
| Machine Status: |
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price: |
$5,750 USD |
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- FMB Mini turbo Bar feed
3/4" x 12ft
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 55971 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00320120-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - Make - Model - |
|---|
Price:
$1995.00 USD | Category: CNC Lathe Part & Accessories
Capacity:
Ad # 11875
|
| Year:
|
|
| Make:
|
|
| Model:
|
|
| Condition:
|
|
|
| Machine Status: |
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
California
|
Country:
|
USA
|
Price: |
$1995.00 USD | |
| General Description |
- This is part of the MDS-A series. Spindle drive unit for CNC AC/Servo Spindle unit. This part has never been used. Buyer agrees to pay shipping charges or to pick up unit in Sonoma, CA.
|
|
This Ad Has Been Viewed 55971 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00120120-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1984 Make - Toshiba Model - TMC-13A |
|---|
Price:
$82,990 reduced USD | Category: Vertical Turret Lathe (VTL)
Capacity: 63" swing-live spindle,4axis with c axis
Ad # 8995
|
| Year:
| 1984
|
| Make:
| Toshiba
|
| Model:
| TMC-13A
|
| Condition:
| Good
|
| Electrical:
| 460/3Phase
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 18,500kg (40,700lbs)
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Indiana
|
Country:
|
USA
|
Price: |
$82,990 reduced USD |
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Toshiba TMC-13A Vertical turning & Boring Machine w/ live spindle and c axis
Live spindle & c axis w/ toolchanger
full C Axis and a live spindle(Milling head).
no control-base machine only
Maximum Swing - 1600mm (63")
Table Diameter - 1250mm (49.2")
Maximum height under ram face - 1250mm (49.2")
Horizontal travel of rail head (X-axis) - -800 to +800mm (31.5")
Vertical travel of ram (Z-axis) - 1000mm (39.4")
Vertical travel of crossrail - 750mm (29.5")
Maximum cutting force of square ram - 3,000kg (6,600lb)
Maximum load of table (turning mode) - 10,000kg (22,000 lbs)
Maximum load of table (milling mode) - 7,000kg (15,400 lbs)
Maximum torque of table - 2100 kg-m (15050 ft.lb.)
Maximum torque of spindle - 110 kg-m (785 ft.lb.)
Maximum thrust force on spindle - 3000 kg (6600 lb.)
Table speed (2 ranges) - 4 - 200rpm
Spindle speed (2 ranges) - 20-1500rpm
Cross rail positioning speed - 410mm/min (16.1 in/min)
Table drive motor - 45kw (60hp)
Spindle drive motor - 15kw (20hp)
Number of tools - 24 (8 for turning, 16 for milling)
Tool shank for turning - ISO #60
taper piloted flange mount
Tool shank for milling - ISO #50
Maximum tool weight 50kg (110 lb)
Tool jib crane - 500 lbs
Voltage - 3ph/480V AC, 60Hz
Primary power capacity - 120kVA
Overall machine height - 5600mm (220")
Machine weight - 18,000kg (40,700 lbs)
Note: No control on this machine; it had a Mitsubishi control on it originally, was not supported anymore, model tmc, scrapped it, ready for retrofit of a new control; just needs control, drives rewired, total electrical retrofit needed. Original cabinets included with machine.
Base machine is in great condition ready to retrofit with new controller by buyer.
Notes: Some of the sheet metal and conveyors are in an enclosed semi trailer.
The major components are in the same location
(heated and dry) as the pictures. The machine base components, hydraulic unit and tool changer are all inside our building and dry. The other pics of the electrical cabinet, conveyor, covers and guard, motor, etc. are stored in a semi trailer and dry. The only rust I saw was some surface rust on the telescoping covers for the cross rail. This is typical for a running machine as these covers are not ever painted.
Mechanical: When we received this machine, we
disassembled to the extent necessary to inspect all the slide and inspected the wear surfaces and gibs. They were all in great and everything still had scrape pattern in all surfaces. No scraping was necessary. We also inspected the ball screws and they check out the same as the ways. This machine obviously seen very little use. We do know, it came out of a GE Aircraft facility and run jet engine components only. They replaced this machine will a new OM vertical because of the CNC control was no longer supported. It was a Toshiba controller. The table was removed and the bearing inspected. They were like new also. Basically, the entire machine was checked out mechanically and all was in great shape.
As you can see in the pics, the storage of this machine has no effect on the components. The protective cross slide covers are present with some surface rust, the conveyor look good, the hyd. tank is inside and is shown in one of the pics, the ATC is in our storage area on the shelving and the splash guard and covers are, as far as I can tell, are present and in good shape. Although the components are in 3 different places, they were closely tracked and protected.
This machine is in excent. mechanical condition and used only on aircraft parts manufacture. This machine needs retrofit with new controller and will be sold as is.
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 55971 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
01020080-9037 |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 1994 Make - IKEGAI Model - TCR 155 |
|---|
Price:
$sold USD | Category: Turning Center 4 - 10 in. chuck
Capacity: 1994 IKEGAI TCR 15 Lathe and Bar Feeder
Ad # 13487
|
| Year:
| 1994
|
| Make:
| IKEGAI
|
| Model:
| TCR 155
|
| Condition:
| Excellent
|
| Electrical:
| 230/460/3 wired 230
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Ohio
|
Country:
|
USA
|
Price: |
$sold USD |
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 1994 IKEGAI TCR 15 Lathe and Bar Feeder ,
Under power currently
Fanuc 18T controls
Chuck Size ( Hydralic) 8"
Maximum Diameter Bar Capacity 1.75"
Machine Type :horizontal
Number of Axes :3
Cutting Diameter :280 mm
Cutting Length :320 mmBar / Bore :50 mm
Tool Stations :8
Spindles :1
Motor Power :9 kw
Spindle Speed :5000 rpm
Extra Functions :
Mill Drill
Bar Feeder
Iemca CNC Boss 542
holds 12 ft bars
includes 8 tool holders
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 55971 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00820130-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - Make - Pietro Cuchi Model - VT110 |
|---|
Price:
$sold USD | Category: CNC Lathe Part & Accessories
Capacity: 60mm Bar Feed 12ft
Ad # 12057
|
| Year:
|
|
| Make:
| Pietro Cuchi
|
| Model:
| VT110
|
| Condition:
| Excellent
|
| Electrical:
| 230/3Phase
|
|
| Machine Status: | Other
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price: |
$sold USD | |
| General Description |
- Pietro Cucchi SPA
Model VT110
Bar Feed 60mm Max
12ft Long
|
|
This Ad Has Been Viewed 55971 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00320120-� |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| FOR SALE: Year - 2000 Make - Hitachi Seiki Model - HT-23R III |
|---|
Mouseover Thumbnails to Enlarge 
|
|
Price:
$sold USD | Category: Turning Center 4 - 10 in. chuck
Capacity: 10"
Ad # 15713
|
| Year:
| 2000
|
| Make:
| Hitachi Seiki
|
| Model:
| HT-23R III
|
| Condition:
| Good
|
| Electrical:
| 230/3Phase
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 10500
|
| Dimension: L x W x H | 12' x 7' x 8' |
Machine Location:
|
| City: |
On Request
|
| State: |
Texas
|
Country:
|
USA
|
Price: |
$sold USD |
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 2000 Hitachi Seiki Model HT-23RIII CNC Lathe
Seicos Control
Specifications:
Swing Over Bed17.7"
Maximum Turning Diameter13.38"
Maximum Turning Length23.6"
Spindle Bore3”
Bar Capacity2.6"
X Axis Travel 9"
Z Axis Travel 24.8"
Spindle Speed Range30 ~ 4,000 rpm
Spindle Nose A2-8
Turret Tool Positions10 Stations (KV Type)
Rapid Traverse(X&Z)1181 ipm
Tailstock Taper / StrokeMT #5 / 20.4"
Spindle Motor20 hp.
Floor Space Requirements12’ x 7’ x 7’
Machine Weight10,560 lbs.
Equipped With:
5C Collet Chuck
Tool Setter
Chip Conveyor
Manuals
|
|
| https://www.youtube.com/watch?v=NtC0b5wgVII |
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed 55971 Times.
|
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
00220180-NA |
|
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | |
