New & Used Fabrication Equipment, Roll Formers / Bending Rolls

Year	Make	Model	Condition	Price	Details

Ad # 10454		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1974	Bertsch	MODEL #14	Good	59,990	Photo / More Info.
Bertsch Initial Pinch Plate Bending Roll: Bertsch Initial Pinch Plate Bending Roll MODEL #14 S/N #M-10210 NEW 1974 SPECIFICATIONS: Bending Capacity 1 1/8" x 3' Bending Roll Diameter 10" Main Drive Motor 40 HP Rear Roll Adjusting Motor 25 HP Weight (approx) 37,100 lbs Machine is equipped with: * Operators Console Station * Air Drop End * Power Rear Roll Adjustment * Power Front Roll Adjustment

Ad # 10158		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Hendley&Whittemor	—	Good	17,995	Photo / More Info.
1/4" x 6' Initial Pinch: 1/4" 6ft capacity Runs good.

Ad # 9931		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1989	Bertsch	3/8 cap.x 77"	Very Good	29,995.00	No Photo / More Info.
3/8 plt.steel x 77" long. Hyd.: Double inital,7 1/2 dai.top roll,air drop end.Older CNC controler,roll around pedestal console. Max.cap. 3/8 plate x 77" long.

Ad # 9674		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
2008	Modern	R-0570H	Demo Machine	18,750.00 reduced	Photo / More Info.
1/4" x 5' initial pich type: 60" x 1/4" cap 7" roll dia 5HP foot pedal x 2 feeding Hardly used and in NEW condition. Only 1 year old.

Ad # 9198		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
2004	Carell Corporation	4RH-100	Excellent	27,995.00 reduced	Photo / More Info.
5' x 3/16" Double Initial Pinch Plate rolls: 5 ft x 3/16 plate rolls 6.7" roll dia 4 HP Induction Hardened Rolls 54HRC Nr. 2 LED Digital Displays All 4 rolls groved to 1/2" depth on drop end side of machine for max. 10 Ga. flanges

Ad # 8315		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Pexto	2418E	Good	2,950	Photo / More Info.
4ft x 16-18 GAUGE PEXTO PLATE BENDING ROLL: USED 4' x 16-18 GAUGE PEXTO PLATE BENDING ROLL Initial Type Capacity:4' x 16-18 Ga. Mild Steel Roll Diameter:3" Roll Length:49" Pass Line:43" Speeds Approx:26 RPM Equipped With: Manual Drop End w/Hand Lever to Raise Top Roll Manual Rear Roll & Bottom Roll Adjustment Pushbuttons For Start - Stop Longitudinal & Circular Grooves In Rear Roll Circular Grooves in Bottom Roll Full Length Emergency Stop Treadle .55 HP 1130 RPM 220/440/3/60 Motor

Ad # 8310		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Montgomery	16862H	Good	79,500.00	Photo / More Info.
14ft x 5/8in MONTGOMERY PLATE BENDING ROLL, INITIAL PINCH: USED 14 FT. X 5/8" MONTGOMERY PLATE BENDING ROLL Hydraulic Initial Type Capacity:4' x 5/8" Mild Steel Roll Length:14'2" Roll Diameter:17" Pass Line:35" Equipped With: Hydraulic Drop End With Control Freestanding Control For Operation With Pushbuttons For Up-Down; Open-Close & Toggle Switch For Forward-Reverse Emergency Stop Button Hydraulic Adjustment Of Rolls With Control Centralized Oil Lubrication Totally Enclosed Drive Hydraulic Pump Driven By 50 HP 460 Volts 3 PH Motor

Ad # 8311		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Bertsch	7	Good	22,500	Photo / More Info.
10ft x 3/16in BERTSCH PLATE BENDING ROLL: USED 10 FT. X 3/16" BERTSCH PLATE BENDING ROLL Initial Type 3-Roll Gear Drive Capacity: 10' x 3/16" Mild Steel 10' x 10 Ga. Stainless Steel Roll Length:10'4" Roll Diameter:7-1/2" Pass Line:30" Speeds Approx.;20 FPM EQUIPPED WITH: Air Drop End w/Control & Automatic Balance Bar Power Rear Roll Adjustment With Pushbutton Control Manual Bottom Roll Adjustment With Position Indicators Drum Switch For Forward-Off-Reverse Full Length Emergency Stop Bar Pushbuttons For Start - Stop Longitudinal Grooves in Rear & Bottom Rolls 3 HP 1155 RPM 3/60 Rear Roll Adjustment Motor 7-1/2 HP 1130 RPM 3 Phase 60 Cycle Main Motor Overall Dimensions: Pit Required)

Ad # 7430		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	KAUFMAN	—	Good	24,500.00	Photo / More Info.
6 FT. X 3/16" KAUFMAN ONE PASS 2-ROLL HYDRAULIC K-PRENE SHEET ROLLING: 6 FT. X 3/16" KAUFMAN ONE PASS 2-ROLL HYDRAULIC K-PRENE SHEET ROLLING & CUR...

Ad # 6976		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1951	BERTSCH	30/25	Good	179,500	Photo / More Info.
USED 10' X 2-1/4" BERTSCH MODEL 30/25 INITIAL PINCH PLATE BENDING ROLL: USED 10' X 2-1/4" BERTSCH MODEL 30/25 INITIAL PINCH PLATE BENDING ROLL CAPACITY: 10' X 2-1/4" BOILER DUTY 10' X 1-3/4" PIPE DUTY ROLL DIAMETER: 25" LENGTH OF ROLLS: 10'2" AIR DROP END POWER ROLL ADJUSTMENT MAIN DRIVE MOTOR: 125 HP

Ad # 6639		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1999	METAL FORM	3/8	Very Good	47,750.00 Reduced	Photo / More Info.
3/8" x 120" Hydraulic Plate Bending Roll: 3/8" x 120" Hydraulic Plate Bending Roll Specifications: Hydraulic Initial Pinch Plate Rolls Equipped With: HYDRAULIC DROP END REMOTE PEDISTAL MOUNTED CONTROL hyd. roll adjustment IN PLANT

Ad # 6576		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Niagra	—	Good	3995	Photo / More Info.
6 ft x 16GA: 6 ft rolls with 4" diameter rolls

Ad # 6977		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1956	BERTSCH	14	Very Good	Sold	Photo / More Info.
USED 12' X 3/4" BERTSCH MODEL 14 INITIAL PINCH PLATE BENDING ROLL: USED 12' X 3/4" BERTSCH MODEL 14 INITIAL PINCH PLATE BENDING ROLL CAPACITY: 12' X 3/4" BOILER DUTY 12' X 5/8" PIPE DUTY ROLL DIAMETER: 15" LENGTH OF ROLLS: 12'2" AIR DROP END MOTORS: 30 HP MAIN DRIVE 15 HP REAR ROLL ADJUSTMENT (2) 2 HP WEDGE ADJUSTMENT NOTE - THIS PLATE ROLL WAS NOT USED IN PRODUCTION WORK, ONLY MAINTENANCE WORK. NEW ELECTRICS INCLUDING JOYSTICK CONTROL, MOTOR BRAKE, AND MAGNETICS WERE UPDATED BY BERTSCH IN 1994. >From Maintenance Shop, very little use.

Ad # 5439		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Wysong	472PR	Good	Sold	Photo / More Info.
72in x 16 ga Wysong Power Slip Rolls: Wysong Power Slip Rolls; Model 472PR; Capacity 16 ga. mild steel x 72" long...

Ad # 6640		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	WEBB	9L Mechanical	Very Good	SOLD	Photo / More Info.
12' x 1/2" Webb Model 9L Mechanical: 12' x 1/2" Webb Model 9L Mechanical OVERHAULED 1996 Specifications: Capacity - 1/2" x 12' MS Length Of Roll - 146" Roll Diameter - 13" Rolling Speed - 7-14 FPM Motors - 20 & 10 HP Equipped With: REAR POWER ADJUSTING ROLL AIR DROP END

Ad # 3159		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1959	Berch	11-C	Fair	Sold	Photo / More Info.
16' x 3/8" Bertch Intial Pinch Plate Roll: Capacity: 16' x 3/8" Over All Length of Bending Roll: 16' Bending Roll Diameter: 14" Bending Capacity: 3/8" x 16' Main Drive Motor: 20 HP Rear Roll Adjusting Roll: 10 HP Gear Motors: 1 HP Equipped With: Forward & Reverse Controller Air Drop End Power Rear Roll Adjustment Power Front Roll Adjustment

Ad # 8312		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Hendley & Whittemore	2-D	Good	Sold	Photo / More Info.
5ft x 11 GAUGE PLATE BENDING ROLL, INITIAL PINCH: USED 5 FT. x 11 GAUGE HENDLEY & WHITTEMORE PLATE BENDING ROLL Initial Type Capacity:5' x 11 Ga. Mild Steel Roll Length:62" Roll Diameter:4-3/4" Pass Line:34" Equipped With: Manual Drop End With Lever To Raise Top Roll Manual Bottom Roll Adjustment Via Hand Wheels Manual Rear Roll Adjustment Via Hand Lever Pushbuttons For Forward-Reverse-Stop Full Length Emergency Stop Treadle 5 HP 1800 RPM 220/440/3/60 Motor

Ad # 8313		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	WYSONG	B-48	Good	Sold	Photo / More Info.
4ft x 12-14 GAUGE WYSONG PLATE BENDING ROLL, Initial Pinch: USED 4 FT. x 12-14 GAUGE WYSONG PLATE BENDING ROLL Initial Type Capacity:4' x 12-14 Ga. Mild Steel Roll Diameter:4-1/4" Roll Length:50" Pass Line:28" Speeds Approx:18 FPM Equipped With: Manual Drop End w/Automatic Balance Bar Manual Rear Roll Adjustment Via Handwheel Manual Bottom Roll Adjustment Pushbuttons for Forward-Reverse- Stop Full Length Emergency Stop Treadle Longitudinal & Circular Grooves In Rear & Bottom Rolls 1-1/2 HP 1800 RPM 220/440/3/60 Motor

Ad # 8314		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Rolshear	PR4-36	Good	Sold	Photo / More Info.
3ft x 10 GAUGE ROLSHEAR PLATE BENDING ROLL, Initial Type: SED 3 FT. X 10 GAUGE ROLSHEAR PLATE BENDING ROLL Initial Type Capacity:3' x 10 Ga. Mild Steel Roll Length:37-1/2" Roll Diameter:4-1/4" Pass Line:34" Speeds Approximately:18 RPM Equipped With: Air Drop End With Control Pushbuttons For Forward-Reverse- Stop Key Selector Switch For Run-Safe- Jog *Link-Lite Safety Curtain Full Length Emergency Stop Treadle Front & Back Manual Bottom & Rear Roll Adjustment 2 HP 1725 RPM 230/460/3/60 Motor

Ad # 5844		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Hendley Whitmore	20 Gauge x 98in	Good	Sold	Photo / More Info.
20 Gauge x 98" Initial Pinch Plate Rolls: Capacity 20 Gauge x 98" Mild Steel Roll Diameter 3½" Power Required 208/220/440 Volt, 3 Phase Equipped With: Manual Drop End Manual Adjustment Reverse and Forward Control Foot Pedal

Ad # 1743		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1995	Round O/Comec	PS - 255	Very Good	Sold	Photo / More Info.
ROUND- 0 PYRAMID ROLLER 8ft x 9/16in cap: 9/16" x 8' Capacity Hydraulic Independent Powers Rolls Independent Roll Set Cone roll Attachment with 10" Rollers Angle Roll Attachment

Ad # 5642		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
2000	IMCAR	4RH100, 4/2	Excellent	Sold	Photo / More Info.
5' x 3/16 4-Roll Hydraulic Double Initial Pinch Plate Bender: Working Length: 5' Capacity: 3/16" Central Roll Diameter: 6.7" Lateral Roll Diameter: 5.9" Total hp: 4 + 1 4RH100 Series are 4 roll, double initial pinch, full hydraulic plate bending machines. These units have independent hydraulic adjustment and inclination of both lateral bending rolls, hydraulic pinch roll adjustment with adjustable maximum pinch pressure, hydraulic drop end for rapid part removal and hydraulic powered rotation of the top roll and pinch roll using high efficiency hydraulic motors and planetary reduction units. Four roll plate rolls allow flat feeding of the sheet and eliminate wasteful pre-bending steps common to some other machine types.

Ad # 9152		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Steco	IP4	Good	sold	Photo / More Info.
6 ft x 1/4inch capacity: 6' x 1/4" STECO PLATE BENDING ROLL IP4 Type; Initial type Capacity: 6' x 1/4" mild steel Roll length: 73" Roll diameter: 7-1/2" Pass line: 32" EQUIPPED WITH: Manual drop end with hand crank to raise top roll Power rear roll adjustment with control Manual bottom roll adjustment Pushbuttons for forward-reverse-off Full length emergency stop treadle front & back 2 HP 1440 RPM 380/420/3/50 Rear roll adjustment motor 7-1/2 HP 940 RPM 380/420/3/50 Main motor Weight approx. 6200# Overall dimensions approx. 129" L-R x 47" F-B x 46" H Serial No. N/A

Processing Time: 2 wallclock secs ( 0.08 usr 0.02 sys + 0.00 cusr 0.01 csys = 0.11 CPU)

Website Hosting & Development by IndSite.