| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9680 | Press Brakes (Hydraulic) |
| 1990 |
Tru-Fab/Wysong |
P40-4 |
Very Good |
8,995.00 reduced |
Photo /
More Info. |
| 40 ton x 51 in brake: 40 Ton x 51"bed, 56" between housings
manual back gage
Hyd. pressure control knob
Upper & lower Dies included as shown
Dual palm buttons
Foot switch
17" throat
top Die fine Adj wheel |
|
| Ad # 10533 | Press Brakes (Hydraulic) |
| 80's |
Bentenbender |
BSI 6' x 95 ton |
Very Good |
22,950 |
Photo /
More Info. |
| Betenbender/BSI 6' x 95 Ton PRESS BRAKE: All New Electrical including 15HP Motor, Footswitch, Enclosure & Switch Bra... |
|
| Ad # 10537 | Press Brakes (Hydraulic) |
| — |
Cincinatti |
CB135 |
Good |
26,995.00 |
Photo /
More Info. |
| 135 Ton, 10 ft. OAL: Machine includes bottom die block and misc. operating tools. Machine capaci... |
|
| Ad # 10534 | Press Brakes (Hydraulic) |
| — |
Bentenbender |
8' x 70 ton |
Very Good |
22,750 |
Photo /
More Info. |
| Remanufactured Betenbender 8' x 70 Ton Press Brake: All New Electrical including 10HP Motor, Footswitch, Enclosure & Switch Bra... |
|
| Ad # 10137 | Press Brakes (Hydraulic) |
| 1987 |
Pullmaz |
EKP-M 1600 2x6.1/5.2 |
Very Good |
call |
Photo /
More Info. |
| Pressing force: 16 000kN: Hydraulic Press brake Pullmax EKP-M 1600 2x6.1/5.2
Year of manufacture: 1987
Excellent working condition
Completeness: 100%
Main parameters:
Working length: 12200 mm (tandem 2 x 6100 mm);
Working height: 800 mm;
Table width: 400 mm;
Internal distance between the ends 5100 mm;
Stroke length 500mm
Pressing force 16 000kN;
Weight 2 x 108 000 kg
Price: contact us
All additional information and photos are available on request |
|
| Ad # 10055 | Press Brakes (Hydraulic) |
| 86?? |
Hydra-Tool Co:HTC |
200-12H |
Good |
20,995.00 reduced |
Photo /
More Info. |
| 200 Ton x 12 ft: 200 Ton x 12 ft bed
124-1/2" between housings
8.5" throat
stroke counter
foot pedal
lube system-manual
lots of dies:1-2" opening-liitle rusty but will clean up ok-bead blast..
stroke adj.
24" power back gage
|
|
| Ad # 9691 | Press Brakes (Hydraulic) |
| — |
— |
homemade |
Good |
295.00 |
Photo /
More Info. |
| Horiz: press brake: 12" length-V die
can bend-1"
dies incl. |
|
| Ad # 9676 | Press Brakes (Hydraulic) |
| 2006 |
Haco |
ERMS 36220 |
Excellent |
68,750 |
Photo /
More Info. |
| 220 Ton x ? ft bed: 220 Ton x 12 ft bed
4 way bottom die with gooseneck top die (good to 3/8" mild steel plate)
back gauge
This machine is in NEW condition. Everything works as it should. |
|
| Ad # 9569 | Press Brakes (Hydraulic) |
| 2008 |
Iroquis Ironworks |
B60/100 |
Excellent |
12,995 |
Photo /
More Info. |
| 60" 100ton: Iroquis B60/100 Hyraulic brake press. Hydro/Mechanical ram capable of 100 ... |
|
| Ad # 9480 | Press Brakes (Hydraulic) |
| 95/96 |
Accupress |
717512 |
Very Good |
52,750.00 |
Photo /
More Info. |
| 175 Ton x12'bed--will bend 12ft x 1/4" steel: Std. specs below please verify..
Capacity .................................. 175 Tons
Length of Bed ............................. 12'
Distance Between Frames ................... 124"
Bed Height ................................ 34"
Bed Width ................................. 5.5"
Ram Stroke ................................ 8"
Open Height ............................... 14"
Closed Height ............................. 6"
Throat Depth .............................. 10"
Fast Approach ............................. 90 ipm
Slow Bend ................................. 24 ipm
Fast Return ............................... 180 ipm
Motor ..................................... 20 HP
Equipped With: please verify below
Advantage Press Brake Package-verify
adjustable Bend Speed
Groove in bed
Back Gage
Overall Dimensions: 168" L x 55" W x 88" H
Overall Weight (approx.): 24,000 lbs.
CNC 99 Autobackgauge-2 axis. Unit
Was used to bend light gauge material
has tooling
can be powered up.
Unit was aquired in business purchase along with Wysong shear (see other listing) |
|
| Ad # 9470 | Press Brakes (Hydraulic) |
| 1998 |
Standard |
— |
Very Good |
159,500.00 |
Photo /
More Info. |
| 1000 Ton 14': (1) One Used STANDARD , BRAKES POWER HYD
Year: 1998
1000 TON X 14' STANDARD,12"STR,12'6"B.H.,100 HP,LOW HOURS........
1000 TON RATING
14' BENDING LENGTH
12'6" BETWEEN HOUSINGS
12" STROKE, VARIABLE
10" THROAT
24" OPEN HEIGHT
12"CLOSED HEIGHT
SPEEDS: 53 IPM APPROACH
17 IPM PRESSING
68 IPM RETURN
FLOOR SPACE: 96" X 176"
WEIGHT: 140,000 LBS.
COMPLETE WITH 100 HP 460/3/60 HYDRAULIC PUMP MOTOR, VICKERS 2800
PSI HYDRAULIC PUMP, ELECTRICAL AND HYDRAULIC CONTROLS, LOWER DIE
HOLDER, AND REMOTE FOOT SWITCH.
GENERAL CONDITION: VERY GOOD CONDITION, LOW HOURS, MFG IN USA
..........................................MIDWEST LOCATION |
|
| Ad # 9161 | Press Brakes (Hydraulic) |
| 80's |
BSI |
6 x 95 Ton |
Good |
21,000 |
Photo /
More Info. |
| 95 Tons x 6 ft: 6 ft x 95 ton
New Hydraulic system |
|
| Ad # 9154 | Press Brakes (Hydraulic) |
| 1983 |
Bertsch |
175-12 |
Good |
29,995.00 |
Photo /
More Info. |
| 175 Ton 12 foot: Specifications
Capacity: 175 Tons
Approach ram speeds (in/min): 245/88/29
Return ram speeds (in/min): 225/52
Overall bend length: 12'
Distance between housings: 10'6"
Platen height above floor: 36"
Bed projection below floor: 0"
Stroke length: 10"
Open height: 17"
Closed height: 7"
Throat depth: 8"
Platen width: 8"
Motor: 30 hp
Approximate shipping weight: 24,500 lbs.
Overall dimensions: 150" x 53" x 130"
Equipped With:
PC Ram control
In plant under power @ customer's facility
|
|
| Ad # 9119 | Press Brakes (Hydraulic) |
| 1988 |
FECO Roto Die |
#15 |
Very Good |
14,995.00 |
Photo /
More Info. |
| 14ga x 10ft Roto Die Hyd : FECO Roto-Die Hydraulic Press Brake 3-Way Full Length Lower Die (1) Set Seg... |
|
| Ad # 9120 | Press Brakes (Hydraulic) |
| 1984 |
Niagara |
HBM-135-10-12 |
Very Good |
24,995.00 |
Photo /
More Info. |
| 135 Ton 12ft Hyd: Niagara 135 Ton Hydraulic Press Brake 12ft Long 10ft 6" Between Housings Br... |
|
| Ad # 8883 | Press Brakes (Hydraulic) |
| 1982 |
Urisviken |
— |
Good |
29,500 |
Photo /
More Info. |
| 200 Tons: Capacity 200 Tons
Overall Length of Bed and Ram 12' 1 5/8"
Distance Between Housings 124"
Stroke 10"
Open Height 19 5/8"
Throat Depth 7 3/4"
Table Width 7 3/4"
Speeds Fast Approach 78" / Minute
Form 27 " / Minute
Creep Form 2.6" / Minute
Return 75" / Minute
Distance From Floor to Top of Table 31 1/2"
Main Motor 30HP 460/230/3/60
Equipped With Pedestal Palm Button Station
Bolt on Angle Brackets
Vickers Hydraulic Pump
Variable Speed Ram
Variable Tonnage
Bed Face Machined with Dovetail Slots
New Valves, Rebuild Hydraulic Cylinders in Jan 2008
Electrics 460/3/60
Voltage 220/440
|
|
| Ad # 8882 | Press Brakes (Hydraulic) |
| 1998 |
Trumpf |
OBL 12 |
Good |
129,500 |
Photo /
More Info. |
| 257 Tons: Tonnage Capacity 257 Ton
Overall Length of Bed and Ram 127"
Distance Between Housings 106"
Stroke 17.5"
Open Height 24.2"
Throat Depth 16.5"
Travel In X Axis 23.5"
Travel in R Axis 9.8"
Operating Speed in Y Axis 2-24 SPM
Drive Motor 25 HP
Equipped With Delem Graphic-Intereactive CNC Control
(6) Axis Back-Gauge (Z1,Z2,R1,R2,X1,X2)
Programmable CNC Crowning
Safety Light Curtains
Electronic Foot Controls
Voltage 230/460
|
|
| Ad # 8880 | Press Brakes (Hydraulic) |
| 1965 |
Pacific |
400-14 |
Good |
59,900 |
Photo /
More Info. |
| 400 Tons: Bending Capacity 14' x 3/8" Mild Steel
10'x 1/2" Mild Steel
7' x 5/8" Mild Steel
Tonnage Capacity 400 Tons
Overall Length of Bed and Ram 14'
Distance Between Housings 12'4.5"
Stroke 12"
Open Height 20"
Closed Height 8"
Throat Depth 10"
Width of Bed 10"
Floor to Top of Bed 32"
Speeds Approximate 140"/Min. Advance
65"/Min. Press
131"/Min. Return
Equipped With 24" Hurco "Autobend 7" 2-Post
Programmable Back Gauge
Vertical Adjustment
Stroke Length, Tilt Adjustment, Tonnage Control
Micrometer Depth Stop
Pushbuttons for Start-Stop
Selector Switch for Inch-Run
Ram Machined for Angles-Front/Back
Sectional Ram Die Clamps
Vickers Hydraulic Pump
Driven by 40 HP 1770 rpm
34" Pit Required
|
|
| Ad # 8881 | Press Brakes (Hydraulic) |
| 1979 |
Southbend |
Johnson single |
Good |
29,500 |
Photo /
More Info. |
| 150 Tons: Capacity 150 Tons
Bed Area 30" FBX 50" LR
Ram Area 24" FBX 34" LR
Stroke 6"
Adjustment (Powered) 41/2"
Shut Height 22"
Bloster Thickness (T-Slotted) 6"
Speed
Single Stroke 25 S.P.M.
Continuous 35 S.P.M.
Main Motor Horsepower 208/220/440/3/60
Equipped With Air Clutch
Air Counterbalance
Inch/Single/Continuous
Cushion
Bijur Pressurized Re-Circulating Lubrication System
Forward/Reverse
|
|
| Ad # 8871 | Press Brakes (Hydraulic) |
| 2000 |
Mitsu Toyokoki |
APB 5613W |
Good |
56,500 |
Photo /
More Info. |
| 56 Tons: Capacity 56 Ton
Bending Length 51.18"
Stroke Length 3.94"
Down Stroke Speed .003-2.64" / Sec
Bending Speed 0.0008 ~ 0.79 in/sec
Up Stroke Speed 2.64 in/sec
Main Motor AC Servo Motor 8 x 2 hp
Backguage Motor Ac Servo Motor 0.86 hp
Ram Repetition Accuracy 0.00004 in
Backgauge Repetition Accuracy 0.0004 in
Backgauge Speed 1181 in/min
Backgauge Stroke 19.69 in
Backgauge up/down Stroke 3.94 in
|
|
| Ad # 8876 | Press Brakes (Hydraulic) |
| 1977 |
Pacific |
K350-22 |
Good |
49,500 |
Photo /
More Info. |
| 350 Tons: Hydraulic Press Brake (Gauge)
Tonnage 350
Bending Length 22'
Distance Between Hoursings 20'-5"
Stroke 12"
Throat Depth 16"
Open Height 20"
Closed Height 8"
3 Speed RAM
Motor 30HP
Pit for Bed 49"
Equipped With 4 Way Die Set
Tonnage Indicator
Electric Foot Switch
Voltage 460
|
|
| Ad # 8860 | Press Brakes (Hydraulic) |
| 2007 |
Accurpress Accel |
515012 |
Good |
169,900 |
Photo /
More Info. |
| 150 Tons: Tonnage 150 Tons
Length of Bed 144"
Distance Between Frames 130"
Bed Height 34"
Length of Ram Stroke 10"
Ram Open Height 26"
Throat Depth 8"
Ram Closed Height 16"
Approach Speed 480
Bend Speed 24-48
Return Speed 320
Motor 20HP
Approximate Dimensions 161"L-R x 78"F-B x 100"H
Equipped With ETS3000 Supreme Backguage
12.1' TFT Active Matrix Screen Graphical Display
Bend Simulation with Interference and Tool Overload Checking
3000 Programs- 50 Steps Each Program
Off Line Programming and Program Storage Via: RS323 Link or 3.5 Diskette
Premium Servo Controlled CNC Backgauge
6 Axis: Y1/Y2, X, R, & Z1/Z2,
Optional R and Z1/Z2 Axis Offer Productivity Boost
Wila NSCL II New Standard Clamping
Lazer Safe Safety Guarding
Front Sheet Support Fixtures
Standard Ram Open Height is 18"
Increased by 8" for total of 26"
|
|
| Ad # 8862 | Press Brakes (Hydraulic) |
| 1989 |
Adira |
QH 150-40 |
Good |
29,500 |
Photo /
More Info. |
| 165 Tons: Capacity 165 Tons
Length of Bed and Ram 13'3.4"
Distance Between Housings 10'2"
Stroke 4"
Open Height 3.4"
Open Height with Punch Holder 9.25"
Throat Clearance 17.72"
Back Guage Speed X Axis 45 Inch per Min
Main Motor Hoursepower 12HP
Oil Tank Capacity 26.5 US Gallons
Equipped With
Adira 24" Motorized Back Guage
Variable Tonage
4 Way Lower V-Die
Swing Down 4-Way Die Lifter
Sectional Ram Clamps
|
|
| Ad # 8861 | Press Brakes (Hydraulic) |
| 1989 |
Accurpress |
713010 |
— |
37,000 |
Photo /
More Info. |
| 130 tons: Capacity 130 Ton
Overall Length of Bed and Ram 10'
Distance Between Housings 8'4"
Stroke 8" (Maximum)
Open Height 18"
Closed Height 10"
Throat Depth 10"
Bed Height 34"
Speeds 60 IPM - Fast Approach; 16 IPM- Bend
140 IPM-Fast Return
Equipped With Flush Floor Design
Machined Ram for Removable Angles
Upper and Lower Die Holder
Stroke Length Control
Disconnect Switch
Manual Back Gauges
Complete Electrical Controls
Includes All Available Manuals and Standard Equipment
|
|
| Ad # 8859 | Press Brakes (Hydraulic) |
| 1998 |
Accurpress |
71758 |
Good |
45,500 |
Photo /
More Info. |
| 175 Tons: Overall Length 120"
Overall Tonnage 175 Tons
Hurco 2 Axis CNC Backgauge
(2) 36" Front Support Arms
Distance Between Frames 76"
Bed Height 34"
Bed Capacity Width 5.5"
Stroke 8"
Open Height 14"
Throat Depth 10"
Approximate Speed Fast Approach 90" / Min.
Slow Bend 24" / Min.
Fast Return 180" / Min.
Horsepower 15
Voltage 220/480
|
|
| Ad # 8595 | Press Brakes (Hydraulic) |
| — |
HTC |
890-G |
Fair |
— |
Photo /
More Info. |
| 90 Ton: Model: 890-G / SN: 670266B
Rated 10' x 10ga
100" between housings
15hp 3ph
$14,900 Plus Brokerage Fee or Best Offer
(716)627-5908 Tues. thru Sat. 9-5 EST |
|
| Ad # 8590 | Press Brakes (Hydraulic) |
| 90 |
BANTAM |
B412 |
Good |
5250.00 |
No Photo /
More Info. |
| 4FT. 12 TON: 4 ft x 12 ton
IR 1 AND 3/4 STROKE |
|
| Ad # 8423 | Press Brakes (Hydraulic) |
| — |
Pacific |
300-10 |
Good |
Call |
Photo /
More Info. |
| 300 TON x 10ft hyd press brake: CAPACITY: 300 TONS
RAM & BED OVERALL LENGTH: 10'0"
DISTANCE BETWEEN HOUSINGS: 8'4-1/2"
WIDTH OF BED: 8"
THROAT DEPTH: 10"
STROKE: 12"
OPEN HEIGHT: 20"
CLOSED HEIGHT: 8"
BED PROJECTION BELOW FLOOR: 18"
BED HEIGHT ABOVE FLOOR: 32"
MOTOR: 30 HP
EQUIPPED WITH:
TONNAGE CONTROL & INDICATOR
2-SPEED POWER UNIT
FOOT PEDAL
MISC. TOOLING
OAD: 10'4" L-R X 6'8" F-B X 10'0" HIGH (ABOVE FLOOR)
APPROXIMATE WEIGHT: 32,5 |
|
| Ad # 8420 | Press Brakes (Hydraulic) |
| 1960 |
CHICAGO DRIES & KRUMP |
200HV10 |
Good |
Call |
Photo /
More Info. |
| 200 Ton: BENDING CAPACITY:1/4" X 10'
BEN & RAM OVERALL LENGTH:174"
DISTANCE BETWEEN HOUSINGS:124"
THROAT DEPTH:8"
STROKE:12"
OPEN HEIGHT:17"
CLOSED HEIGHT:5"
NO PIT REQUIRED
SPEEDS:ADVANCE 135"/ MIN
PRESSING 30"/ MIN
RETURN:145"/ MIN
MOTOR:(2)15 HP 1800 RPM
FRAME: 284U, 3 PAHAE, 60 CYC.220/440 VOLT
DOUBLE END HYDRAULIC PUMP MOTOR
EQUIPPED WITH:
24" HORN - RIGHT SIDE
FULL LENGTH SECTIONAL RAM DIE CLAMPS
FULL LENGTH T-SLOTTED BED
FOOT PEDAL CONTROL
|
|
| Ad # 8282 | Press Brakes (Hydraulic) |
| 1982 |
Darley |
EHP.110.31/25 |
Good |
18,500 |
Photo /
More Info. |
| 121 Ton x 10 ft Darley Hydraulic Press Brake: USED 10 FT. X 3/16" DARLEY HYDRAULIC PRESS BRAKE
Capacity: 121 tons
Bending Capacities:
122" x 3/16" Mild Steel
8' x 1/4" Mild Steel
Overall Length of Bed & Ram:122"
Distance Between Housings:100.3"
Stroke:5.9"
Open Height:14.7"
Closed Height:4.8"
throat Depth:9.8"
Width of Bed:6.25"
Floor to Top of Bed:35.5"
Speeds Approx.:3.9"/Second - Approach
.30"/Second - Press
2.5"/Second - Return
EQUIPPED WITH:
5.5" High Die Rail
Free Standing Control w/Dual Palm
Buttons For Run - Emergency Stop Button
Electric Foot Switch
Pushbuttons For Start - Stop
Sectional Ram Die Clamps
T-Slots in Front - Back & Top of Bed
Hydraulic Power Unit
Driven by 10 HP Motor
|
|
| Ad # 8291 | Press Brakes (Hydraulic) |
| — |
Ajial |
502 M |
Good |
10,750.00 |
Photo /
More Info. |
| 50 Ton x 7 ft Hydraulic Press Brake: 7 FT. X 12 GA. AJIAL HYDRAULIC PRESS BRAKE
Tonnage Capacity:50 Tons
Bending Capacity:7" x 12 GA Mild Steel
Overall Length of Bed & Ram:84"
Distance Between Housings:80"
Stroke:3.9"
Open Height:11.8"
Throat Depth:15.7"
Width of Bed:3.9"
Floor To Top Of Bed:32 3/4"
Speeds Approx:1.9"/Sec. - Approach
.29"/Sec. - Press
1.8"/Sec. - Return
Equipped With:
Electric Foot Switch
3" High Die Rail
Sectional Ram Die Clamps
Selector Switch For Start - Stop
Speed Adjustment Control
Tonnage Control With Pressure Gauge
Emergency Stop Button
Hydraulic Pump Driven By
5 1/2 HP 1700 RPM 440/3/60 Motor
|
|
| Ad # 8289 | Press Brakes (Hydraulic) |
| — |
Rousselle |
POL 5025 |
Good |
13,500 |
Photo /
More Info. |
| 55 Ton x 10 ft Rousselle Hydraulic Press Brake: USED 10' x 14 GAUGE ROUSSELLE HYDRAULIC BRAKE
Tonnage Capacity:55 Tons
Bending Capacities:
10' x 14 Ga. Mild Steel
8' x 12 Ga. Mild Steel
Overall Length Of Bed & Ram:10'
Distance Between Housings:100"
Stroke:4"
Open Height:10"
Closed Height:6"
Throat Depth:9"
Width Of Bed:5-1/4"
Floor To Top Of Bed:32-3/4"
Speeds Approx: 2"/Sec. - Approach
.4"/Sec. - Press
3"/Sec. - Return
EQUIPPED WITH:
Electric Foot Switch
2-3/4" High Four Way Die Rail
Key Selector Switch For Manual-Off-
Auto & Emergency Stop Button
Stroke Length Adjustment
Pushbutton For Upstroke
Sectional Ram Die Clamps
Dovetail Slots In Front & Back
Of Bed
Hydraulic Pump Driven By 5.5 HP
1700 RPM 220/440/3/60 Motor
|
|
| Ad # 8287 | Press Brakes (Hydraulic) |
| 70's? |
Pacific |
J-75 |
Good |
12,500.00 |
Photo /
More Info. |
| 75 Tons x 10 ft Pacific Hydraulic Press Brake: USED 10 FT. X 12 GA. PACIFIC HYDRAULIC PRESS
Tonnage Capacity:75 Tons
Bending Capacities:11' x 12 Ga. Mild Steel
8' x 10 Ga. Mild Steel
6' x 3/16" Mild Steel
Overall Length of Bed & Ram:12'
Distance Between Housings:10'2 3/4"
Stroke:7"
Open Height:13"
Closed Height:6"
Throat Depth:12"
Width of Bed:5-1/2"
Floor to Top of Bed:33"
Speeds Approx.:
178"/Min. Rapid Advance
79"/Min. Normal Press
12"/Min. Anti Whip
142"/Min. Rapid Return
EQUIPPED WITH:
Electric Foot Switch
Selector Switch For Single Cont.
Stroke Length Adjustment
Ram Tilt Adjustment
Sectional Ram Die Clamps
Pushbuttons For Start Stop
T Slots in Front & Back of Bed
Hydraulic Power Unit Driven by
15 HP 1455 RPM 425/3/50 Motor |
|
| Ad # 8283 | Press Brakes (Hydraulic) |
| 1993 |
Atlantic |
HD165X10 |
Good |
call |
Photo /
More Info. |
| 165 Tons x 10 ft Atlantic Hydraulic Press Brake: Tonnage Capacity:165 Tons
Bending Capacities:
10' x 1/4" Mild Steel
8' x 5/16" Mild Steel
Overall Length of Bed & Ram:10'2"
Distance Between Housings:98"
Stroke:6"
Open Height:16.25"
Closed Height:10.25"
Throat Depth:9-3/4"
Width of Bed:3-1/8"
Floor to Top of Bed:34"
S.P.M. Approx.:150"/Minute Rapid Approach
15"/Minute Press
165"/Minute Rapid Return
EQUIPPED WITH:
32" Pendant Operated Power Back Gauge
With Control & Hand Wheel For
Fine Positioning With Readout
3-1/2" High Two Die Rails
Electric Foot Switch
Ram Depth Pendant Control With
Readout
Ram Adjustment Control
*Triad Safety Light Control
Pushbuttons For Start - Stop
Tonnage Control & Pressure Gauge
Sectional Ram Die Clamps
20 HP 220/440/3/60 Motor
|
|
| Ad # 7669 | Press Brakes (Hydraulic) |
| 1983 |
NIAGARA |
HD-175-6-8 |
Good |
34,500.00 |
Photo /
More Info. |
| 175 TON X 8' NIAGARA MODEL HD-175-6-8 HYDRAULIC PRESS BRAKE: 175 TON X 8' NIAGARA MODEL HD-175-6-8 HYDRAULIC PRESS BRAKE
CAPACITY ............................ 175 TON STROKE .............................. 10´´ OVERALL BED & RAM ................... 96´´ X 24´´
OPEN HEIGHT ......................... 15´´
CLOSED HEIGHT ....................... 5´´
DISTANCE BETWEEN HOUSINGS ........... 6'6´´
PERMANENTLY FLANGED BED & RAM ....... 24´´ WIDE
FULL PRESS CONTROLS ................. YES
AUTOBEND CONTROL - NO BACK GAUGE
FLOOR STANDING |
|
| Ad # 7489 | Press Brakes (Hydraulic) |
| 1989 |
Adira |
QH 150-40 |
Very Good |
29,500.00 |
Photo /
More Info. |
| 1989 Adira QH 150-40 Hydraulic Press Brake: Lenth Bed & Ram 13'3.4"
Stroke 4"
24" Motorized Back Gage
Full Machine Specifications
Capacity 165 Tons
Length of Bed and Ram 13'3.4"
Distance Between Housings 10'2"
Stroke 4"
Open Height 3.4"
Open Height with Punch Holder 9.25"
Throat Clearance 17.72"
Back Guage Speed X Axis 45 Inch per Min
Main Motor Hoursepower 12HP
Oil Tank Capacity 26.5 US Gallons
Equipped With
Adira 24" Motorized Back Guage
Variable Tonage
4 Way Lower V-Die
Swing Down 4-Way Die Lifter
Sectional Ram Clamps |
|
| Ad # 7300 | Press Brakes (Hydraulic) |
| 1986 |
LVD |
PPN400/4500 |
Excellent |
79,500.00 |
Photo /
More Info. |
| 440 ton LVD Model PPN400/4500 Hydraulic Press Brake: 440 ton LVD Model PPN400/4500 Hydraulic Press Brake
Max. capacity 440 tons
Overall length of bed and ram 177”
Distance between housings 148”
Throat depth 11.8”
Shut height 21.65”
Ram adjustment 8.66”
Max. stroke 11.8”
Bed width 9.8”
Capacity of back gage system 40”
Approach speed 188 IPM
Pressing speed 21.5 IPM
Return speed 187 IPM
EQUIPPED WITH:
40” cap.front operated motorized back gage system
Hydraulic tool clamping
Lower die holder
Remote palm and foot control pedestal
48 H.P. Main Drive Motor
Requires: 47.2” pit depth for bed
Dimensions from floor level: 269”LRx 136.2”Wx 162” Height from proposed floor level |
|
| Ad # 6927 | Press Brakes (Hydraulic) |
| 1990 |
WYSONG |
RT-140-122 |
Excellent |
39,500.00 |
Photo /
More Info. |
| WYSONG MODEL RT-140-122 CNC HYDRAULIC PRESS BRAKE: WYSONG MODEL RT-140-122 CNC HYDRAULIC PRESS BRAKE
Capacity: 140 Ton
Overall Length of Bed & Ram: 10'2"
Distance Between Housings: 8'6"
Stroke: 8"
Die Space: 17"
Closed Height: 9"
Throat Depth: 12"
Distance Bed to Floor: 32"
Speeds: 236 IPM - Advance
16 IPM - Pressing
155 IPM - Return
Flush Floor Design
Welded Steel Construction
EQUIPPED WITH:
Cybelec DNC 90 6-Axis CNC Control with Color Graphics
Programmable 4-Axis Back Gauge
Hydraulic Die Clamping (Ram and Bed)
Automatic Lubrication System
10 HP AC Main (Pump) Drive Motor; Electrical Controls
Dual Palm Button or Electric Foot Switch Operation
BENDING CAPACITY:
10' x 3/16" |
|
| Ad # 6906 | Press Brakes (Hydraulic) |
| 1984 |
ALLSTEEL |
70-6 |
Very Good |
17,500.00 |
Photo /
More Info. |
| 70 TON X 6' ALLSTEEL HYDRAULIC PRESS BRAKE: 70 TON X 6' ALLSTEEL HYDRAULIC PRESS BRAKE
TONNAGE ......................... 70 TONS
OVERALL LENGTH OF BED & RAM ..... 72´´
DISTANCE BETWEEN HOUSINGS ....... 54´´
CAPACITY ........................ 6 X 3/16´´ MILD STEEL
STROKE .......................... 6´´ MAXIMUM
SHUT HEIGHT (SDAU) .............. 15´´
CLOSED HEIGHT ................... 9´´
THROAT .......................... 8´´
RAM SPEED APPROACH .............. 130 IPM
RAM SPEED PRESSING .............. 60 IPM
RAM SPEED RETURN ................ 130 IPM
FLOOR TO BED .................... 32´´
ELECTRIC FOOT TRIP .............. YES
MOTOR ........................... 20 HORSEPOWER |
|
| Ad # 6422 | Press Brakes (Hydraulic) |
| 1960 |
Chicago Dries & Krump |
200HV10 |
Good |
29,500.00 |
Photo /
More Info. |
| 200 Ton, Chicago D&K, 10' x 1/4" Hydraulic Press Brake: BENDING CAPACITY: 1/4" X 10'
BEN & RAM OVERALL LENGTH: 174"
DISTANCE BETWEEN HOUSINGS: 124"
THROAT DEPTH: 8"
STROKE: 12"
OPEN HEIGHT: 17"
CLOSED HEIGHT: 5"
NO PIT REQUIRED
SPEEDS: ADVANCE 135"/ MIN
PRESSING 30"/ MIN
RETURN 145"/ MIN
MOTOR: (2) 15 HP 1800 RPM
FRAME: 284U, 3 PHASE, 60 CYC. 220/440 VOLT
DOUBLE END HYDRAULIC PUMP MOTOR
EQUIPPED WITH:
24" HORN - RIGHT SIDE
FULL LENGTH SECTIONAL RAM DIE CLAMPS
FULL LENGTH T-SLOTTED BED
FOOT PEDAL CONTROL |
|
| Ad # 6412 | Press Brakes (Hydraulic) |
| 1983 |
BERTSCH |
175 x 10 |
Good |
34,500.00 |
No Photo /
More Info. |
| 175 TON X 10' BERTSCH HYDRAULIC BRAKE: 175 TON X 10' BERTSCH HYDRAULIC BRAKE:
CAPACITY ......................... 175 TON
OVERALL LENGTH OF BED ............ 10'
DISTANCE BETWEEN HOUSINGS ........ 8'6´´
STROKE ........................... 10´´
OPENING .......................... 17´´ MAXIMUM7´´ MINIMUM
CNC BACKGAUGE .................... YES |
|
| Ad # 6400 | Press Brakes (Hydraulic) |
| 1974 |
PEXTO LVD |
BH12 |
Very Good |
25,500.00 |
Photo /
More Info. |
| 110 TON X 13' PEXTO LVD HYDRAULIC PRESS BRAKE: 110 TON X 13' PEXTO LVD HYDRAULIC PRESS BRAKE
CAPACITY .................................. 110 TON
OVERALL LENGTH OF BED & RAM ............... 157´´
DISTANCE BETWEEN HOUSING .................. 120´´
STROKE OF RAM ............................. 6´´
OPEN HEIGHT ............................... 13-3/4´´
CLOSED HEIGHT ............................. 7-3/4´´
DEPTH OF THROAT ........................... 9-3/4´´
RAM SPEED ADVANCED ........................ 240 IPM
RAM SPEED PRESSING ........................ 24 IPM
RAM SPEED RETURN .......................... 140 IPM
ELECTRIC FOOT TRIP ........................ YES
MOTOR ..................................... 15 HORSEPOWER |
|
| Ad # 5495 | Press Brakes (Hydraulic) |
| 1974 |
DIACRO |
16-96 |
Good |
9,950.00 |
Photo /
More Info. |
| 35 TON, 8' DIACRO HYDRA-MECHANICAL PRESS BRAKE: LENGTH OF BED & RAM ----------------------- 96"
DISTANCE BETWEEN HOUSINGS ----------------- 62"
CAPACITY -------- ( MILD STEEL ) ---- 96" X 16 GA.
STROKE OF RAM ----------------------------- 2"
SHUT HEIGHT RAM UP, STROKE DOWN ----------- 9"
RAM ADJUSTMENT ---------------------------- 3"
THROAT CLEARANCE FROM CENTER OF DIES ------ 9"
MAIN DRIVE MOTOR ------------------- 3 HP A.C.
EQUIPPED WITH ---
HURCO AUTOBEND IV CNC BACK GAUGE WITH 24" RANGE
STROKE ADJUSTMENT
COMPLETE HYDRAULIC SYSTEM
LOWER & TOP DIE HOLDERS
FOOT PEDAL CONTROL |
|
| Ad # 5490 | Press Brakes (Hydraulic) |
| 1986 |
LDV |
55-BH-08N |
Good |
19,500.00 |
Photo /
More Info. |
| 55 TON LVD CNC HYDRAULIC PRESS BRAKE: TONNAGE CAPACITY ------------------ 55 TONS
OVERALL WORK LENGTH ----------------------- 100"
DISTANCE BETWEEN HOUSINGS ----------------- 80"
RAM STROKE ----------- ( MAXIMUM ) -------- 4"
RAM ADJUSTMENT ---------------------------- 3"
MAXIMUM DISTANCE BETWEEN BED AND RAM ------ 12"
DEPTH OF GAP ------------------------------ 8"
WIDTH OF BED ------------------------------ 5-1/2"
MAIN DRIVE MOTOR ------------- 4 KW 230/460/3/60
EQUIPPED WITH ---
MNC 800 CNC BACK GAUGE WITH 30" RANGE
LOWER DIE HOLDER
UPPER DIE HOLDER
PEDESTAL CONTROL STATION WITH DUAL PALM & FOOT CONTROL |
|
| Ad # 5494 | Press Brakes (Hydraulic) |
| 1989 |
WYSONG |
H40-72 |
Good |
14,500.00 |
Photo /
More Info. |
| 40 TON x 52" WYSONG ROTARY ACTUATED HYDRA-MECHANICAL PRESS BRAKE: 40 TON WYSONG MODEL H40-72 ROTARY ACTUATED HYDRA-MECHANICAL PRESS BRAKE WIT... |
|
| Ad # 5496 | Press Brakes (Hydraulic) |
| 1963 |
PACIFIC |
150-12 |
Good |
19,900.00 |
Photo /
More Info. |
| 150 TON, 12' PACIFIC HYDRAULIC PRESS BRAKE: CAPACITY -------------------------- 150 TONS
OVERALL LENGTH OF BED & RAM --------------- 12'
DISTANCE BETWEEN HOUSINGS ----------------- 8'5"
BENDING CAPACITY, MILD STEEL ---------- 10' 3/16"
STROKE OF RAM ----------------------------- 10"
OPEN HEIGHT ------------------------------- 15"
CLOSED HEIGHT ----------------------------- 5"
THROAT DEPTH ------------------------------ 6-3/4"
PIT REQUIRED FOR BED EXTENSION
BELOW FLOOR --- ( L x W x D ) ----- 10" X 2" X 16"
MAIN DRIVE MOTOR ------------------- 15 HP A.C.
OVERALL HEIGHT ---------------------------- 104"
( EXCLUDING 16" BELOW FLOOR SECTION )
EQUIPPED WITH:
UPPER DIE CLAMPS
LOWER DIE CLAMP
ELECTRIC CONTROL PEDAL
TONNAGE CONTROL
REMOVABLE RAM AND BED ANGLES |
|
| Ad # 5493 | Press Brakes (Hydraulic) |
| 1989 |
GULFIL |
PE-25-100 |
Good |
27,500.00 |
Photo /
More Info. |
| 110 TON, 100" GUIFIL HYDRAULIC PRESS BRAKE: FEATURING UP-ACTING DESIGN, 2 AXIS CNC BACK GAUGE
CAPACITY, U.S. TONS ------------------ 110 TONS
BENDING LENGTH ---------------------------- 100"
DISTANCE BETWEEN HOUSINGS ----------------- 80"
THROAT DEPTH ------------------------------ 16"
STROKE LENGTH ----------------------------- 18"
SPEED, APPROACH ----------------------- 1.58 IPS
SPEED, BENDING ---------------------- .28 IPS
SPEED, RETURN --------------------- 2.17 IPS
MAIN DRIVE MOTOR ------------------- 10 HP A.C.
EQUIPPED WITH ---
AUTOMEC (AUTOGAUGE CNC 1000) 2 AXIS CNC BACK GAUGE
UPPER DIE CLAMPS |
|
| Ad # 5491 | Press Brakes (Hydraulic) |
| 1996 |
LDV |
PPEB350/14 |
Good |
89,500.00 |
Photo /
More Info. |
| 350 TON 177" BED LVD CNC HYDRAULIC PRESS BRAKE: FEATURING FLUSH FLOOR DESIGN, 6 AXIS CNC GAUGING, HYDRAULIC DIE CLAMPS
CAPACITY ---------------------- 350 TONS
OVERALL LENGTH OF BED AND RAM ------------- 177"
DISTANCE BETWEEN HOUSINGS ----------------- 136"
STROKE OF RAM, MAXIMUM -------------------- 21.6"
MAXIMUM DISTANCE TABLE TO RAM ------------- 27.55"
THROAT DEPTH ------------------------------ 13.7"
WIDTH OF BED TOP -------------------------- 8.2"
SPEEDS, APPROACH ----------------- 3.93 IN./SEC.
SPEEDS, WORKING ------------------ .33 IN./SEC.
SPEEDS, RETURN -------------------- 3.4 IN./SEC.
MAIN DRIVE MOTOR -------------- 48 HP A.C.
EQUIPPED WITH ---
LVD #MNC95/C 6 AXIS CNC GAUGING SYSTEM
HYDRAULIC DIE CLAMPING
LIGHT CURTAINS ( AS-IS )
FLUSH FLOOR DESIGN |
|
| Ad # 5088 | Press Brakes (Hydraulic) |
| — |
Amada |
RG-25 |
Very Good |
14,500 |
Photo /
More Info. |
| 25 Ton Hydraulic Press Brake: SPECIFICATIONS
TONNAGE -------------------------- 25 TONS
TABLE LENGTH --------------------- 47.3"
MAXIMUM BEND LENGTH -------------- 49.3"
DISTANCE BETWEEN UPRIGHTS -------- 40.2"
THROAT DEPTH --------------------- 7.88"
LENGTH OF STROKE ----------------- 3.94"
OPEN HEIGHT ---------------------- 14.58"
POWER REQUIREMENTS --------------- 3 KVA, 230 VOLT/3 PHASE
HYDRAULIC OIL RESERVOIR ---------- 6.86 GALLONS
WEIGHT (APPROX.) ----------------- 3,100 LBS.
CONTROL -------------------------- D-9 NC, S/N# FN66546
--------------------------------------------------------------------------------
EQUIPPED WITH
- CNC BACKGAUGE
|
|
| Ad # 5044 | Press Brakes (Hydraulic) |
| 1982 |
DONWELL |
#17-1300 |
Very Good |
7,795.00 reduced |
Photo /
More Info. |
| Hydraulic Press Brake-17 Ton x 4ft-3"in: 17 Ton x 4-3"ft
DRC Single Axis Back Gauge new in 1982
Palm & Foot Control
Includes Die Rail but no dies included
Good. POR Due to DRC in Service.
One Owner Machine.
Tonnage 17-Ton
Overall Bend Lnegth 4' - 3"
Distance Between Hsgs. 41-1/2"
Throat Depth 5-3/4"
Stroke 0>3"
Motor 230/460V/3/60 (wired 460V at present)
With: Palm & Foot Control
Includes Die Rail
|
|
| Ad # 4813 | Press Brakes (Hydraulic) |
| 1996 |
PREMIER |
425.2 MOD 12 |
Demo Machine |
27,500 |
Photo /
More Info. |
| PREIMER 25 TON CNC DEMO MACH.: CAPACITY ---------------------------- 25 TONS
BEND CAPACITY ----------------------- 4' X 16 GAUGE
DISTANCE BETWEEN FRAMES ------------- 30"
BED LENGTH -------------------------- 4'
RAM STROKE -------------------------- 4"
RAM OPEN HEIGHT --------------------- 10-1/2"
THROAT DEPTH ------------------------ 4"
RAM APPROACH SPEED ------------------ 240 IPM
RAM BEND SPEED ---------------------- 24 IPM
RAM RETURN SPEED -------------------- 300 IPM
MOTOR ------------------------------- 3 H.P., 230V, 3 PHASE
WEIGHT (APPROX.) -------------------- 3,150 LBS.
OVERALL DIMENSIONS (APPROX.) -------- 48"L X 42"W X 78" HIGH
HURCO AB-7/LP-11 CONTROL SYSTEM:
PROGRAMS ---------------------------- 600
NUMBER OF BENDS --------------------- 2400
GAUGE TRAVEL ------------------------ 24"
VERTICAL ADJUSTMENT ----------------- 10"
HORIZONTAL ADJUSTMENT --------------- 9"
GAUGE ADJUSTMENT -------------------- +/- .003"
GAUGE REPEATABILITY ----------------- +/- .002"
GAUGE SPEED ------------------------- 800 IPM
GAUGE HOLDING FORCE ----------------- 200 LBS.
POWER ------------------------------- 115/230 VAC |
|
| Ad # 4544 | Press Brakes (Hydraulic) |
| ???? |
Pacific |
J-70 |
Very Good |
12,500.00 |
Photo /
More Info. |
| 70 TON 10 FT. X 12 GA. PACIFIC HYDRAULIC PRESS BRAK: 70 Ton, Pacific hyd., 10' OA, 8'4" BH, 10' x 12 ga.
Bending Capacities: 10' x 12 Ga. Mild Steel
6' x 10 Ga. Mild Steel
Tonnage Capacity: 70 Tons
Overall Length of Bed & Ram:10'
Distance Between Housings:8'3-1/2"
Stroke: 7"
Open Height: 14"
Closed Height: 7"
Throat Depth: 6"
Width of Bed: 3-1/4"
Floor to Top of Bed: 32"
Speeds Approx.: 105"/Min. Advance
45"/Min. Press
105"/Min. Return
EQUIPPED WITH: 3" High Die Rail
Dual Electric Foot Switches
Pushbutton For Start - Stop
Stroke Length & Ram Tilt Adj.
Sectional Ram Die Clamps
Toggle Switch For Cycle - Inch -
Off - On
Vickers Hydraulic Pump
Driven by 15 HP 1455 RPM
380/3/50 Motor |
|
| Ad # 3517 | Press Brakes (Hydraulic) |
| 1996 |
Adira |
QHD-7025 |
Good |
18,750.00 reduced |
Photo /
More Info. |
| 1996 ADIRA DOWNACTING 77 TON X 8' CNC HYDRAULIC PRESS BRAKE : THIS IS A VERY RARE DOWNACTING MODEL TONNAGE CAPACITY: 77 TONS-adjustable... |
|
| Ad # 3144 | Press Brakes (Hydraulic) |
| — |
Pacific |
J55 |
— |
14,500.00 |
Photo /
More Info. |
| Pacific J55 CNC Press Brake: 55 Ton Capacity
8' Bed and Ram Length
Automatic CNC Back Gauge |
|
| Ad # 3116 | Press Brakes (Hydraulic) |
| — |
LVD |
165 BH |
— |
55,000.00 |
Photo /
More Info. |
| LVD CNC Press Brake Model 165 BH: 217" Bending length
New in 1985 (currently in plant under power)
Distance between side frames: 148"
40" Horn on right side
Distance between bed and ram: 13.8" Max
Stroke of ram: 5.9" max., Adjustment of ram 4.7"
Depth of gap in side frame: 9.8"
Motor 18 Hp, 230/460 3 phase
Slot and pit required for bed
Back gauge range increased from 24" to 40" at time of purchase Work lifting system Equipped with: Axis X1, X2, R, Z1, Z2, U, V, Alpha-numeric keyboard, tape recorder, programmable speed |
|
| Ad # 1277 | Press Brakes (Hydraulic) |
| — |
Niagra |
IB36-5-6 |
Good |
7,250.00 |
Photo /
More Info. |
| 55 Ton Press Brake x 6': 35 ton middle, 55 ton bottom, 2-1/2" stroke, 4" adjustable ram,12" shut hei... |
|
| Ad # 8080 | Press Brakes (Hydraulic) |
| 1970 |
Promecam |
RG35-20 |
Very Good |
Sold |
Photo /
More Info. |
| 35 Ton -80" bed length: 35 Ton unit W/ tonnage control
80" overall bed length, 66" between housings
8" throat
bottom acting-pushes up on bed
dual palm buttons
12" back gage
|
|
| Ad # 8081 | Press Brakes (Hydraulic) |
| 85?? |
Pacific |
J-series # J110-14 |
Good |
Sold |
Photo /
More Info. |
| 110ton 14 ft bed Hydraulic press brake: 110 Ton
14 ft bed length, 150" between housing
8" throat
4 way v die, 1/2?, 5/8", flat Vees
no back gauge
capacity rated at 12 ft x 10Ga(1/8") mild steel |
|
| Ad # 9063 | Press Brakes (Hydraulic) |
| 1994 |
LVD |
240/20-PP1 |
Very Good |
Sold |
Photo /
More Info. |
| 20 ft x 240 tons: 20ft bed
200 inches / 16'7" between houisings
12" throat
240 ton
pit required
max capacity: PPI 220/61?? on tag
upper & lower dies
1/2" wide V lower die opening -used for this HVAC sheet metal work
Back gage LVD/Barco # MNC95C not sure if 3 axis, verify ??
floppy drive
Auto leveling system?
dual palm buttonsafety switch- roll around pendent
Currently set in a shallow pit
34"in rear power back gage W/ up/down & in /out control
|
|
| Ad # 8069 | Press Brakes (Hydraulic) |
| 2002 |
Betenbender |
6-50T |
Very Good |
Sold |
Photo /
More Info. |
| 50 Ton x 6 ft bed: 50 ton capacity
6 ft bed , 65" between housings
power backgage with digital readout display speed control on bacgage
no tooling included
|
|
| Ad # 5489 | Press Brakes (Hydraulic) |
| 1977 |
DIACRO |
55-10 |
Good |
Sold |
Photo /
More Info. |
| 55 TON DIACRO HYDRA-MECHANICAL PRESS BRAKE: LENGTH OF BED & RAM ----------------------- 120"
DISTANCE BETWEEN HOUSINGS ----------------- 102"
CAPACITY ----- ( MILD STEEL ) ------ 120" X 14 GA.
STROKE OF RAM ----------------------------- 3"
SHUT HEIGHT RAM UP, STROKE DOWN ----------- 12"
RAM ADJUSTMENT ---------------------------- 4"
THROAT CLEARANCE FROM CENTER OF DIES ------ 8"
MAIN DRIVE MOTOR ------------- 10 HP 230/460/3/60
EQUIPPED WITH ---
24" CNC BACK GAUGE ( 1 AXIS )
STROKE ADJUSTMENT
COMPLETE HYDRAULIC SYSTEM
LOWER & TOP DIE HOLDERS
FOOT PEDAL CONTROL |
|
| Ad # 9015 | Press Brakes (Hydraulic) |
| 1999 |
Amada |
FBDIII 8025FS |
Excellent |
Sold |
Photo /
More Info. |
| 8' x 88 Tons: SPECIFICATIONS:
Capacity - Tonnage 88 Tons
Bending Length 98.6"
Overall Length of Bed and Ram 98.4"
Distance between Housings 86.6"
Stroke - Maximum 5.91"
Height - Open 16.54"
Throat Depth 15.8"
Backguage Travel 19.7"
Floor to Top of Bed 37.25"
Speeds - Rising 3.03 IPS
- Bending 0.32 IPS
- Lowering 3.55 IPS
Bending Capacity - Mild Steel 6'6" x 3/16"
Approximate Overall Dimensions 143" L-R x 56" F-B x 97" H
Approximate Weight 13,669 Lbs.
EQUIPPED WITH:
Amada Model NC9-FS, 8 Axis CNC Gauging System
Power Backguage w/19.7" of Movement
Built-In Hydraulic System to Increase the Rigidity of the Lower Beam
by Evenly Distributing the Stress of Bending - thus maintaining Parallelism
Punch Holders (12)
Pressure Adjustment with Gauge
10.1 HP AC Main (Pump) Drive Motor
Electrical Controls
|
|
| Ad # 6930 | Press Brakes (Hydraulic) |
| 2004 |
TRUMPF |
V320 |
Excellent |
Sold |
Photo /
More Info. |
| TRUMPF MODEL V320 CNC HYDRAULIC PRESS BRAKE: TRUMPF MODEL V320 CNC HYDRAULIC PRESS BRAKE
Capacity: 357 Tons
Maximum Bending Length: 13'4"
Distance Between Housings: 12'1"
Distance Floor to Bed: 41"
Stroke (Adjustable): 14" Max.
Open Height: 21"
Throat: 16"
Width of Bed: 8"
Speeds: 354 IPM - Advance
2 - 24 IPM - Pressing
320 IPM - Return
Flush Floor Design
EQUIPPED WITH:
TrumaBend 8-Axis Graphic 2-D CNC Control
4-Axis CNC Back Gauge
Ram & Bed Power Die Clamps
CNC Programmable Crowning
CNC Programmable Die Shift
Adjustable Front Supports & Sheet Lifter
50 HP Main Drive (Pump) Motor
Electrical Controls
Electric Foot Switch or Dual Palm Buttons Operation
BENDING CAPACITY (MILD STEEL):
12' x 1/2" |
|
| Ad # 6929 | Press Brakes (Hydraulic) |
| 1997 |
LVD |
350BH15 |
Very Good |
Sold |
Photo /
More Info. |
| LVD MODEL 350BH15 CNC HYDRAULIC PRESS BRAKE: LVD MODEL 350BH15 CNC HYDRAULIC PRESS BRAKE
Capacity: 350 Ton
Overall Length of Bed and Ram: 15'
Distance Between Housings: 12'6"
Stroke: 11.8" (Maximum)
Open Height: 15.75"
Throat Depth: 22.4"
Speeds: 236 IPM - Advance
30 IPM - Pressing
283 IPM - Return
Width of Bed Top: 10.6"
All Steel Welded Construction
Flush Floor Design
EQUIPPED WITH:
LVD Model MNC-95/C 5-Axis Control System
4-Axis Back Gauge
Sectional Ram Clamps
60 HP AC Main (Pump) Drive Motor
Self-Contained Hydraulic Power Unit
Electrical Controls
Sight Type Oil Level Gauge
BENDING CAPACITY:
15' x 3/8" |
|
| Ad # 6928 | Press Brakes (Hydraulic) |
| 1983 |
PACIFIC |
J165-10 |
Very Good |
Sold |
Photo /
More Info. |
| PACIFIC MODEL J165-10 HYDRAULIC PRESS BRAKE: PACIFIC MODEL J165-10 HYDRAULIC PRESS BRAKE
Capacity: 165 Ton
Overall Length of Bed & Ram: 10'
Distance Between Housings: 8'6"
Stroke: 10" (Max); Open Height: 32"; Closed Height: 22"
Throat Depth: 7"
Distance Bed to Floor: 35"; Pit Required for Bed: 8" (Approx)
Stroke Length & Speed Change Control; Mode & Speed Selector
Switches
Speeds: 133 IPM Advance; 75 IPM Pressing; 177 IPM Return
Auto Level Control; Auto Decompression System; Overload
Protection
All Steel Frame - Interlocked Construction
EQUIPPED WITH:
Micrometer Fine Tilt Adjustment
30 HP AC Main (Pump) Motor 230/460/3/60 Currently 460
Electrical Controls
Dual Palm Button Operation |
|
| Ad # 9751 | Press Brakes (Hydraulic) |
| 90's ? |
Wysong |
PH-6072 |
Very Good |
sold |
Photo /
More Info. |
| 60 Ton x 6ft bed w/ cnc back gage: 6 ft bed
62.5" between housings
max die space 15"
6" stroke
approx.30" back gage
light curtain
foot pedal
2 axis cnc back gage-ram and depth height has manual hand wheels
lots of tooling included-shown
Capacities:
12'-9" x 14ga(.075)
9ft x 12ga(.105)
7ft x 10GA (.135)
5ft x 7ga(.179)
|
|
| Ad # 6885 | Press Brakes (Hydraulic) |
| — |
Wysong |
168-22 |
Good |
SOLD |
Photo /
More Info. |
| 14 foot x 22 GA.wysong air/hydraulic brake-Heavy Duty: 14 foot x 22GA. Wysong Air/Hydraulic Break. Out of business sale. Break is ... |
|
| Ad # 8856 | Press Brakes (Hydraulic) |
| 2000 |
Accurpress |
710010 |
Good |
Sold |
Photo /
More Info. |
| 100 Tons: Capacity 100 Tons
Overall Length of Bed and Ram 10"
Distance Between Frames 100"
Stroke 8"
Throat Depth 10"
Open Height 14"
Closed Height 6"
Speeds
Fast Approach 115IPM
Slow Bend 24 IPM
Fast Return 260 IPM
Approximate Cycles Per Minute (F.S.) 15
Back Gauge Range 24"
Bed Height 34"
Bed Width 3.5"
Main Motor 10HP
Equipped With Accurpress ETS 3000 Control System with Premium CNC Backgauge
5 Axis Premium CNC Gauging, Y, X, R, Z1, Z2 Axis
Adjustable Bend Speed Control
Complete Set of Upper Punch Holders
Bottom Filler Block
Electric Foot Switch,
Pedestal Dual Palm Controls
Complete Electrical Controls
Includes all Available Manuals and Accessories
|
|
| Ad # 6445 | Press Brakes (Hydraulic) |
| — |
Atek Bantam |
B212 |
Excellent |
Sold |
No Photo /
More Info. |
| 12 Ton x 24" Bed Hydraulic Press Brake: LIKE NEW. Used very little. Has the stand and dies. This will fit in a pic... |
|
| Ad # 6406 | Press Brakes (Hydraulic) |
| — |
CINCINNATI |
300 X 14 |
Very Good |
Sold |
Photo /
More Info. |
| 300 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE: 300 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE
CAPACITY ........................... 300 TON
OVERALL LENGTH OF BED & RAM ........ 14'
DISTANCE BETWEEN THE HOUSINGS ...... 12'6´´
STROKE ............................. 12´´
OPEN HEIGHT ........................ 22´´
CLOSED HEIGHT ...................... 10´´
THROAT ............................. 11´´
RAM SPEED FAST PRESS ............... 77 IPM
RAM SPEED FULL TONNAGE PRESS ....... 37 IPM
RAM SPEEDS RETURN .................. 80 IPM
MILLED & DRILLED FOR ANGLES ........ YES
ELECTRIC FOOT TRIP ................. YES
MOTOR .............................. 40 HORSEPOWER |
|
| Ad # 9513 | Press Brakes (Hydraulic) |
| 2005 |
Ras |
Flexbend 73.40 |
Demo Machine |
sold |
Photo /
More Info. |
| RAS FLEXIbend Metal Folding System: RAS FLEXIbend Metal Folding System
Model:RAS FLEXIbend 73.40
Maximum Forming Capacity at Full Length
mild steel, tensile 55,000 psi12 gauge
aluminum1/8”
Maximum Length of Forming 159"
Smallest Permissible Inner Bend Radius, (Full Width) 1.25 x gauge
Minimum Flange Height 6 x gauge
Clamping Beam Maximum Speed Up 1.58"/sec
Clamping Beam Maximum Speed down 1.58"/sec
Maximum Folding Speed 90°/sec
Folding Angle Setting Range0-180°
CNC Folding Beam Stroke 3.15"
CNC Lower Beam Stroke3.15"
Clamping Beam Stroke11.81"
Backgauge Positioning Accuracy+/-.004"
Backgauge Maximum Positioning Time2 sec
Backgauge Minimum Position.394"
Backgauge Maximum Position (standard)61"
Backgauge Maximum Position (w/J-shape)159"
ELECTRICAL SPECIFICATIONS
220/440 60 cy 3ph (transformer included)
Amperage: 30 amps
Ambient temperatures of more than +40 degrees C (104 F) may require a special execution
Motor Drive Power: 5.5 HP
Control:
§Touch & More Control
§DNC communication software for a PC with RS232C interface
§Front footswitch movable on rail
§Rear footswitch and keyswitch (one switch front, one switch rear)
§CNC folding beam adjustment for varying sheet thicknesses
§CNC lower beam adjustments for perfect radii
§Picture-based icon programs
§Speed optimizer
Backgauge:
§Integrated CNC backgauge and sheet support system
§Ten finger stops (range .39” to 61”)
§Adjustable stainless steel sheet support panels with ballcasters
§One short sheet support with ballcasters for rear operation (575mm wide x 1200 mm long) 22.6” x 47.2
§Rectangular adjustable angle squaring gauge 67" long
§J-shaped backgauge 159” long with two additional backgauge finge
Tooling:
§16 sections of 7.87" long segmented goat's foot tooling 6.10" tall (126” total)
§2 adapter sets of goat's foot tooling to include the following (24.8” total):
(2-30mm, 2-35mm, 2-40mm,
2-45mm, 2-50mm, 2-55mm, and
2-60mm)
§2 corner pieces (one right/one left) (9.4” total)
§Segmented folding beam tool set .984" wide (up to 12 gauge)
§Segmented folding beam tool set .472” wide (up to 16 gauge)
§Segmented lower beam tool set 1.575" high for down flanges
§Automatic upper beam tool clamping system
§Automatic folding beam tool clamping system
§Integrated folding beam crowning system
§Tool cart
§CNC Crowning
ADDITIONAL OPTIONS AVAILABLE FOR FLEXIBEND:Non purchased with machine-verify
1.Execution with second front footswitch for working with two operators and keyswitch
(required by safety regulations when working with two operators in front)$1,265
2.Movable footswitch on rail – two operator$980
3.3.15" tall rear-free goat's foot tooling (7.87" long)$595 ea
– Adapter set of 3.15" tools$2,255 ea
– Corner pieces$640 ea
4.6.10" tall rear-free goat's foot tooling (7.87" long)$810 ea
– Adapter set of 3.15" tools$2,905 ea
– Corner pieces$670 ea
5.10 basic segments of sharp tooling (15.75")$670/ea
6.Sharp tooling 60mm (2.36”)$185/ea
7.U-shaped backgauge 159” long with ballcasters$7,020
(addition to the standard J-shape)
8.Offline Software$1,880
|
|
| Ad # 5003 | Press Brakes (Hydraulic) |
| 1966 |
DIACRO |
#16-96 |
Good |
Sold |
Photo /
More Info. |
| 35-Ton DIACRO #16-96 Hydra-Mechanical Press Brake, S/N-660117465, Used: Hurco IV CNC back gauge
Manual Shut Height Adjust.
Adjustable Stroke
Die Rail 2-1/2" x 3" Hight x 8' |
|
| Ad # 995 | Press Brakes (Hydraulic) |
| 90's |
custom |
40 Ton |
Needs Work |
Sold |
Photo /
More Info. |
| Small Press Brake 40 Ton x 42": 42" bed
tee-slotted table;
hyd. unit,
foot switch;
fingers in top rail
2 avaiable
some tooling shown |
|
| Ad # 7574 | Press Brakes (Hydraulic) |
| 1994 |
ACCUPRESS |
7013020 |
Very Good |
Sold |
Photo /
More Info. |
| 130 TON X 20' ACCUPRESS HYDRAULIC BRAKE With CNC Back Gauge: 130 TON X 20' ACCUPRESS HYDRAULIC BRAKE
CAPACITY ........................... 130 TON
OVERALL LENGTH OF BED & RAM ........ 20'
DISTANCE BETWEEN HOUSING ........... 15'
STROKE ............................. 8´´
OPEN HEIGHT ........................ 14´´
CLOSED HEIGHT ...................... 6´´
SPEEDS ADVANCE ..................... 115 IMP
RAM SPEEDS PRESSING ................ 20 IPM
RAM SPEED RETURN ................... 180 IPM
CNC BACK GAUGE ..................... AUTO GAUGE1000
PROGRAMABLE OPERATOR STATION ....... YES
FOOT CONTROL ....................... YES |
|
| Ad # 7579 | Press Brakes (Hydraulic) |
| 1980 |
CINCINNATI |
230CB12 |
Very Good |
Sold |
Photo /
More Info. |
| 230 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE With CNC Back Gauge: 230 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE
CAPACITY ......................... 230 TON
OVERALL LENGTH OF BED AND RAM .... 14'
DISTANCE BETWEEN HOUSING ......... 12'6´´
STROKE OF RAM .................... 10´´
OPEN HEIGHT ...................... 17´´
CLOSED HEIGHT .................... 7´´
DEPTH OF THROAT .................. 8´´
RAM SPEED HIGH ................... 101 IPM
RAM SPEED MEDIUM ................. 49 IPM
RAM SPEEDS LOW ................... 14 IPM
RAM SPEEDS RETURN ................ 95 IPM
HURCO AUTOBEND 20C CNC BACK GAUGE. YES
MILLED & DRILL FOR ANGLES ........ YES
ELECTRIC FOOT TRIP ............... YES
MOTOR ............................ 30 HORSEPOWER |
|
current group
groups previously viewed
groups not yet viewed
