| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10258 | Cold Saws & Power Hack Saws |
| 83 ?? |
collins |
314 |
Good |
1250.00 |
Photo /
More Info. |
| cold saw with 12" blade: nice saw, has 2 speed motor low / high, vice is double clamp and saw swival... |
|
| Ad # 9801 | Cold Saws & Power Hack Saws |
| 1952 |
Racine |
— |
Good |
4,490.00 |
Photo /
More Info. |
| 12"x18" cap: 60-130 rpm
12" rounds
12x18 squares
coolant
30"x2.5" blade |
|
| Ad # 9207 | Cold Saws & Power Hack Saws |
| 2007 |
Scotchman |
VS-275HT |
Demo Machine |
2,950.00 |
Photo /
More Info. |
| 10-3/4inch blade- ferrous cutting cold saw: Standard Features
variable speed option 30-150 RPM
Manual Double Self-Centering Vise Assures Burr-Free Cuts
Operator Controlled Trigger Switch
Miter Capabilities 45 degrees Left and 45 degrees Right
Miter Locking Device: quick, accurate setting-stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
Capable of Slotting
Hardened and Ground Worm and Wheel Gear Box
Worm Wheel of Top Quality Bronze
7 Gallon Coolant Tank with Pump
30" Material Length Stop
One 10" Diameter (250 mm) HSS Blade
One Blade Wrench
One Gallon Concentrated Coolant
460 /3 -wired 460/3 Phase Electrics
Made in USA
Capacities & Specifications
Cutting Speeds Must Specify when Ordering
30 rpm - 120 rpm Motor rate:
2.0 hp
60 rpm / 120 rpm Motor rate:
1.5 hp
TUBING cutting capacity
Round & Square & Rectangle 90 Deg
3-3/8"
3" x 3"
3" x 2-3/8" 45 Deg
2"
2" x 2"
3" x 2"
SOLID & Round & Square 90 Deg
1-1/2"
1-1/2" x 1-1/2" 45 Deg
1"
1" x 1"
Maximum Diameter Blade 10-3/4" 275 mm
Arbor Bore 1-1/4" 32 mm
Pin Spacing 2/8/45
Width 21-7/8"
Depth 43-1/2"
Height not including handle 53-1/4"
Height from floor to vise 36-1/8"
Shipping Weight 600 lbs.
|
|
| Ad # 8528 | Cold Saws & Power Hack Saws |
| — |
Thomas |
350 Moddial |
Good |
1500.00 |
Photo /
More Info. |
| 14" blade, ferrous cutting: ferrous cutting
14" blade
3 speed
very heavy duty saw |
|
| Ad # 7949 | Cold Saws & Power Hack Saws |
| 2007 |
SteelMax |
S-14 |
Excellent |
400.00 |
Photo /
More Info. |
| 14 in Dry Metal Hand Saw with Built-in Vise: Blade Diameter: 14"
One Carbide inserted blade included |
|
| Ad # 7904 | Cold Saws & Power Hack Saws |
| 1963 |
Wagner |
WK 12590-7 |
Very Good |
6,750.00 reduced |
Photo /
More Info. |
| 48" Diam. Semi-Automatic Hydraulic Cold Saw : Saw Blade Diameter: 48"
Saw Kerf: aprox 3/16"
Hydraulic Feeds
Box Way Construction
Saw Blade Speed: 15,20,25,30,40,50,60 and 80 fpm
Saw Blade horizontal Travel: Approx 24"
Vise: Manually operated
Vise Opening: approx 18"
Vise Height: 10"
Vise Width: 16"
Material Top Support: approx 31" Height
Powere Roller Infeed (Bottom) |
|
| Ad # 7617 | Cold Saws & Power Hack Saws |
| — |
Marvel |
6-A |
Good |
995.00 reduced |
Photo /
More Info. |
| 12" Marvel Power Hack Saw: Distance Between Colums: 12"
Blade: 12" x 1-1/2"
7 in round
7 x 12 in retangle capacity |
|
| Ad # 6972 | Cold Saws & Power Hack Saws |
| 1997 |
CENTRO METALCUT |
XII-PT |
Very Good |
79,500.00 |
Photo /
More Info. |
| USED CENTRO METALCUT MODEL XII-PT CARBIDE BLADE CUTOFF SAW : USED CENTRO METALCUT MODEL XII-PT CARBIDE BLADE CUTOFF SAW
CAPACITY: 4" - 14" ROUNDS
CAPACITY: 4" - 14" SQUARES
SAW BLADE DIAMETER: 24" - 42"
CUTTING SPEED: 10 - 85 RPM
FEED RATE: 0 - 40 IPM INFINITELY VARIABLE
RETURN STROKE: 140 IPM
MINIMUM CUT LENGTH: 2"
SQUARENESS: +/- .008/4" OF MATERIAL CUT
MOTOR: SPINDLE 75 HP/DC VARIABLE SPEED
HYDRAULIC 15 HP
ELECTRICAL REQUIREMENT: 55 KW, 480/3/60
EQUIPPED WITH:
HYDRAULIC VISE
6' ENTRANCE ROLLER TABLE
4' EXIT ROLLER TABLE
OAD: 61" X 97" X 82" HIGH MACHINE
32" X 64" X 44" HIGH HYDRAULIC UNIT
48" X 18" X 72" HIGH ELECTRICAL CABINET
96" X 54" X 40" HIGH ENTRANCE ROLLER TABLE
48" X 28" X 28" HIGH EXIT ROLLER TABLE |
|
| Ad # 5500 | Cold Saws & Power Hack Saws |
| 1999 |
WILTON/MEP |
TIGER 350 CNC-FE |
Very Good |
16,500.00 |
Photo /
More Info. |
| WILTON/MEP 14" CNC AUTOMATIC FERROUS COLD SAW: MAXIMUM BLADE SIZE ------------------------ 14"
BLADE SPEEDS --- ( 4 ) ----------- 15/30/45/90 RPM
VISE OPENING, MAXIMUM ------------------ 7-7/16"
CUTTING CAPACITIES, 90 DEG.:
ROUND ---------------------------- 4-11/16"
SQUARE --------------------------- 3-15/16"
RECTANGULAR ---------------------- 7" X 3-15/16"
CUTTING CAPACITIES, 45 DEG.:
ROUND ---------------------- 4-5/16"
SQUARE --------------------- 3-15/16"
RECTANGULAR ---------------- 4-15/16" X 3-15/16"
MOTOR ------------------------ 2.5/3.5 HP 220/3/60
EQUIPPED WITH ---
MEP EVOLUTION CNC CONTROL
BAR FEED WITH BALL SCREW AND D.C. DRIVE
PNEUMATIC VISE
COMB JAWS FOR BUNDLING
VERTICAL HOLDDOWN CLAMP
FOUR SPEED GEARBOX
AUTOMATIC VISE SYSTEM
FLOOD COOLANT
MITER CAPABILITY
FOOT PEDAL CONTROL
VERTICAL COLUMN DESIGN |
|
| Ad # 5146 | Cold Saws & Power Hack Saws |
| — |
Peerless |
41-01 |
Good |
1,950 |
Photo /
More Info. |
| 11" x 11" Variable speed draw saw: 12" vert. capacity.
14" horiz. capacity.
Adjustable stroke.
Variable speeds.
Extra blades. |
|
| Ad # 5116 | Cold Saws & Power Hack Saws |
| — |
Pedrazzoli Perris |
350 Auto saw |
— |
12,500 |
Photo /
More Info. |
| PEDRAZZOLI PERRIS 350 AUTO SAW: CUTTING CAPACITY:
RECTANGLE ---------------------------- 4-3/4" X 6"
ROUND SOLID -------------------------- 4-3/4"
ROUND SQUARE ------------------------- 4-3/4"
MAIN MOTOR HORSEPOWER ------------------ 2-1/2
VOLTAGE, PHASE, CYCLES ----------------- 480/3/60
SAW BLADE SIZE ------------------------- 13"
SAW BLADE SPEEDS ----------------------- 2500 RPM
SAW HEAD FEED SPEEDS ------------------- INFINITELY VARIABLE
FEED STROKE LENGTH (SINGLE STROKE) ----- 25-3/16"
OVERALL DIMENSIONS --------------------- 7' X 4' X 5'
--------------------------------------------------------------------------------
FEATURES
- FULLY AUTOMATIC OPERATION
- PNEUMATIC VISES & MATERIAL SHUTTLE
- MATERIAL FEED STROKE ADJUSTABLE TO 3 CYCLES
- SAW HEAD FEED TYPE IS AIR OVER OIL CYLINDER
- MACHINE WIRED FOR 480 VAC
- SAW BLADE SPEED IS CHANGED BY CHANGING MOTOR
AND SAW BLADE HEAD PULLEYS
|
|
| Ad # 4850 | Cold Saws & Power Hack Saws |
| 1987 |
KALTENBACH |
HDM 900 |
Very Good |
19,750.00 |
Photo /
More Info. |
| KALTENBACH HDM 900: MITRE FACILITY AND ADDITIONAL CLAMPING |
|
| Ad # 3022 | Cold Saws & Power Hack Saws |
| — |
JET |
CTAS-10-1 |
Very Good |
1,250.00 |
Photo /
More Info. |
| 36" x 27" JET Tilting Arbor Table Saw: Saw diameter 10"
Arbor hole diameter 5/8"
Maximum depth of cut 3"
Maximum rip to right of blade 26"
Maximum rip to left of blade 15-1/2"
Maximum thickness of cut at 45 º 2-1/8"
Table in front of saw blade at maximum cut 12"
Maximum width of dado 13/16"
Table height 34"
Table size with extension 36"W x 27"D
Table size without extension 20"W x 27"D
Overall dimensions (maximum) 40"D x 46"W x 36-1/2"H
Spindle speed 4200 RPM
Blade not included
|
|
| Ad # 2014 | Cold Saws & Power Hack Saws |
| — |
Delta |
115-6534 |
Good |
995.00 |
Photo /
More Info. |
| 10" Dia Blade Abrasive saw: manual operation
Mitre cutting
stand
25" x 20" table
10" dia blade
|
|
| Ad # 1726 | Cold Saws & Power Hack Saws |
| — |
KELLER |
3HA |
Good |
495.00 |
Photo /
More Info. |
| 8" POWER HACK SAW: 8" ROUND CAPACITY
12-14INCH BLADE LENGTH
VARIABLE SPEED 50 - 350
|
|
| Ad # 1306 | Cold Saws & Power Hack Saws |
| — |
Everett |
# K26W |
Good |
2,495.00 reduced |
Photo /
More Info. |
| Large Abrasive Wet/Dry saw: 26"Dia. blade
30HP motor
ossocilation cycle
wet or dry operation
Power down feed |
|
| Ad # 819 | Cold Saws & Power Hack Saws |
| late80's |
Elgo |
SCH/350 Automatic |
Good |
9,990.00 |
Photo /
More Info. |
| Fully Automatic Cold Saw-Ferrous: coolant system,
14" spare blades with spares
automatic feeding, clamping, sawing , change over mechanism permits 7 speed and feed variations of saw blade
Capacity: 4.75 round, 8" x 8" flat; 3.3" x 7.9" rectangular; Automatic cutting length 1/4" to 20"
Needs some minor work: out of stock switch, part counter, amp meter needs repaired. But saw is in good working condition.
60 RPM Max RPM |
|
| Ad # 2307 | Cold Saws & Power Hack Saws |
| 1980 |
Trennjaeger |
PMC-12 |
Good |
Sold |
Photo /
More Info. |
| Heavy Duty Structural Circular Cold Saw: 12"cutting height x 39" cutting length.This machine is designed for longitu... |
|
| Ad # 9073 | Cold Saws & Power Hack Saws |
| 96?? |
Trennjaeger |
ST251 -Maschinen NR |
Very Good |
Sold |
Photo /
More Info. |
| Ferrous- cold saw: Trennjaeger Cold Saw Model ST251 Maschinen NR 996
(220/440 Volts; 9.2/4.6 Amps); 2 HP
coolant
Type DNas 145716, NR 205721! |
|
| Ad # 9749 | Cold Saws & Power Hack Saws |
| 1999 |
KMT-IMET |
CT350-AFE |
Good |
Sold |
Photo /
More Info. |
| Non Ferrious/high speed- Fully Automatic Circuliar Saw: The CT 350 Series machines are high speed circular saws for aluminum extrus... |
|
| Ad # 2151 | Cold Saws & Power Hack Saws |
| ? |
Modern |
2LD Modified to 3LD |
Good |
Sold |
No Photo /
More Info. |
| 3" Capacity Cut to Length Production Lathe: 22 Ft. bar feed
3" tube dia capacity
High speed production cut to length machine!
AB PLC controled
Loads of Tooling! |
|
| Ad # 6711 | Cold Saws & Power Hack Saws |
| 1997 |
KALTENBACH |
RKL550 AX |
Excellent |
Sold |
Photo /
More Info. |
| 21.7" KALTENBACH Non-Ferrous Automatic Circular Cold Saw, RKL550 AX: 21.7" KALTENBACH Non-Ferrous Automatic Circular Cold Saw, Model RKL550 AX
Cutting capacity at 90 degrees:
Rounds 6.5"
Squares 6.1"
Profiles 15.3" x 1.2"
Blade diameters 17.7", 19.7", 21.7"
Cutting speed with 21.7" diameter blade 16,320 S.F.M.
Blade feed rate, infinitely variable 0-86.6 I.P.M.
Rapid return of saw blade 236.2 I.P.M.
Saw blade type Carbide metal
Cut-off lengths from .39" to 78.7"
EQUIPPED WITH:
Model S5 SIEMENS PLC control of cutting lengths and quantities
Ball screw driven length stop nut
Carriage driven by chain and motor
Fine adjustment of cutting length by hand wheel and digital display
Counter for preselecting the required number of cut-offs
Infinitely variable and hydraulically actuated upward saw blade feed with rapid return
Contact free return stroke (automatic enlargement of cutting gap)
Vertical vise used to clamp work piece on both sides of the saw blade
Short stroke vise with hand crank for preadjustment
Sound proofed cabin around the complete machine area
Infeed and outfeed tables
Chip exhaust system
Accu-Lube spraymist coolant
Miscellaneous spare parts including rebuilt drive motor
Approximately (20) miscellaneous saw blades
8 H.P. direct drive motor and electrical controls |
|
| Ad # 6563 | Cold Saws & Power Hack Saws |
| — |
MEC |
MEC300ST |
Good |
Sold |
Photo /
More Info. |
| MEC Model MEC300ST non-ferrous cold saw, 12" blade , mitre cutting : Mec Model MEC300ST non-ferrous, mitre cutting cold saw, 12" blade, 230/460v... |
|
| Ad # 5148 | Cold Saws & Power Hack Saws |
| 1993 |
Eisele |
VA-L Standard #09405P0017 |
Good |
Sold |
Photo /
More Info. |
| Fully automatic non-ferrous cold saw: 16" blade dia.
mitre
|
|
| Ad # 6547 | Cold Saws & Power Hack Saws |
| — |
SCOTCHMAN |
350LT/PK |
Excellent |
Sold |
Photo /
More Info. |
| 14” 350LT/PK SCOTCHMAN Circular Cold Saw: 14” 350LT/PK SCOTCHMAN Circular Cold Saw
Blade diameter 14”
Cutting Capacity:
90º- Squares Solid 2” x 2”
Tubing 4 7/8”
Squares, hollow 4 3/8” x 4 3/8”
Solid rounds 2”
45º- Squares Solid 1 ¾” x 1 ¾”
Tubing 4 3/8”
Squares, hollow 3 ½”
Solid rounds 1 ¾”
Max. vise opening 4”
Max. swivel ± 45º
Two cutting speeds: 22 RPM for alloys(stainless)
44 RPM mild steel tubing
EQUIPPED WITH:
Mitre cutting to ±45º
Double self-centering work vise (pneumatic operated)
Hydro pneumatic adjustable downfeed of blade
Self-closing blade guard
Coolant system
(1)Blade
1 / 2 H.P. |
|
| Ad # 9573 | Cold Saws & Power Hack Saws |
| 1990 |
SCOTCHMAN |
CPO 315HT-PK |
Good |
SOLD |
No Photo /
More Info. |
| Ferrous Cutting COLD SAW: 12" Ferrous Cutting Blade
power air clamp vise
10' In-Feed Conveyer Rollers
6' Out-Feed Conveyer Rollers
Single Speed
87" material stop scale mounted to out-feed conveyer |
|
| Ad # 10433 | Cold Saws & Power Hack Saws |
| — |
Dake |
350 SX |
Good |
sold |
Photo /
More Info. |
| 14" :ferrous cutting-semi automatic down feed: 14" blade
15/30/45-90 rpm-4 speed
auto blade head downfeed
ferrous cutting speeds
semi-automatic
coolant
4-1/2" round hollow capacity
3.54" round solid cap
mitre base
|
|
| Ad # 2868 | Cold Saws & Power Hack Saws |
| 1977 |
KALTENBACH |
HDM-900 |
Good |
Sold |
Photo /
More Info. |
| 1977 KALTENBACH MODEL HDM-900 MITER CUTTING HD COLD SAW : SAW BLADE DIAMETER 35.4”
CUTTING CAPACITIES AT RIGHT ANGLES:
SOLID ROUNDS 11.8"
SOLID SQUARES 9.44”
SOLID RECTANGLES 23.6” X 7.87”
BEAMS 23.6" x 11.8”
CUTTING CAPACITIES AT MITER
BEAMS ON HORIZONTAL PLANE AT 75 DEGREES
17.7” X 11.8”
BEAMS ON HORIZONTAL PLANE AT 60 DEGREES
15.7” X 11.8”
BEAMS ON HORIZONTAL PLANE AT 45 DEGREES
9.4” x 9.4"
BEAMS ON VERTICAL PLANE AT 75 DEGREES
17.7” X 4.3”
BEAMS ON HORIZONTAL PLANE AT 30 DEGREES 8.7” X 7.9”
BEAMS ON HORIZONTAL PLANE AT 20 DEGREES 4.7” X 4.70”
CUTTING SPEEDS 14/28
FEED RATE (INFINITELY VARIABLE) 0–40” PER MINUTE
MAIN MOTOR HORSEPOWER 10 230/460/3/60
HYDRAULIC MOTOR HORSEPOWER 2 230/460/3/60
COOLANT PUMP MOTOR 0.2 440/3/60
|
|
| Ad # 2740 | Cold Saws & Power Hack Saws |
| 70's? |
Ohler |
KA630 |
Good |
Sold |
No Photo /
More Info. |
| Fully automatic shuttle cold saw-billet saw: Variable speed -will cut both ferrous & non-ferrous Mtl.
157" roller track
6.6-10-1/4" dia max, 7-7/8 x 13-3/4" flat
variable speed
20-28" Dia blades,4 included
Blade speeds / 20":
12.5-18-25
Surface feet per minute 36-50-72
Blade speeds / 25":
16-22.5-32
Surface feet per minute 45-64-90
Blade speeds / 28":
18-25-36
Surface feet per minute 50-72-100
20", 25", 28" Cutting feeds: 0" to 20"
Main Hp of motor is 10 @ 1200 RPM
manuals |
|
| Ad # 2668 | Cold Saws & Power Hack Saws |
| — |
Promacut |
UN1 16/60 10H |
Good |
sold |
Photo /
More Info. |
| Heavy Duty Promacut Ferrous Cold Saw: 15 HP
20" diameter blade
Semi-Automatic-up down head
4-1/2" Diameter Capacity
Mitre Capability - Vise Swings +/- 45 deg
Hydraulic Auto up/down feed |
|
| Ad # 8182 | Cold Saws & Power Hack Saws |
| 1973 |
Kaltenbach |
HDM 800 |
Good |
Sold |
Photo /
More Info. |
| 31.5" Diameter, Kaltenbach HDM 800 Cold Saw: 31.5" diameter blade, cuts up to 24" WF sectionsMitre cut units for angles ... |
|
| Ad # 9130 | Cold Saws & Power Hack Saws |
| — |
BEWO/Scotchman |
CPO 315/ZW/HA/LT |
— |
Sold |
Photo /
More Info. |
| 12-1/2" blade-: 12.5 inch blade
22/44 RPM
4-1/2" round cap @ 90 deg-tubing
mitre 45 deg
rectangle 5.5 x 4" cap tubing
Solid capacity- 2" round , 2" x 2" Square
Auto power down feed & air vise clamp
coolant pump 10 gal |
|
