| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10583 | Radial Drill Press |
| 1977 |
South Bend |
MX 7500/2500 |
Very Good |
24,995.00 |
Photo /
More Info. |
| 20" dia column x 8 ft arm..VERY LARGE: 20" Dia Column
8 ft arm
rapids
coolant
10 HP motor
5MT spindle
T slot base
made in Spain-Quality |
|
| Ad # 10515 | Radial Drill Press |
| NA |
Cincinnati Bickford |
2053 - 6' x 19" column |
Very Good |
14,495.00 |
Photo /
More Info. |
| 6' arm: 6' Arm
6ft Vertical Spindle Travel,
19" Column Diameter,
spindle taper: 5MT
Max Height Spindle to Base 78",
Min Height to Base 16",
Spindle speeds up to 1200 rpm, 36 Spindle Speeds, 18 Feeds, Max Height above Headstock 153", Max Height above Column 130" |
|
| Ad # 10242 | Radial Drill Press |
| ?? |
American Hole Wizard |
4-11 |
Very Good |
6,750.00 |
Photo /
More Info. |
| 4ft arm x 11 in dia column: 4ft arm
11" dia column
4MT nose
50-1500RPM: 12 speeds, can go up to 3000rpm if using pick-off gears
power feed trip
head clamp
depth dial
column clamp
coolant
5HP
tilting base table
drilling capacity: hole 2" std(can go bigger) in cast iron, 1-1/2" mild steel,
tapping capacity-2" in cast iron, 1-1/2" mild steel
all manuals |
|
| Ad # 10112 | Radial Drill Press |
| 1965 |
Ryazan` |
RT182S1 |
Very Good |
call |
Photo /
More Info. |
| —: Drilling and Milling machine RT182S1,
Manufacturer: Ryazan` machine-tool factory, Russia
Year of manufacture: 1965
Very good working condition
Main data:
Length of workpiece: 2000 mm;
Drilled diameter: 250 mm
Dimensions of workpiece: 800 x 2000 mm;
Weight of workpiece: 2000 kg
Completeness of machine: 100%
Price: contact us
All additional information and pictures are available on request |
|
| Ad # 9194 | Radial Drill Press |
| — |
Master |
— |
Good |
1150.00 REDUCED |
Photo /
More Info. |
| 4 ft., 12" column, 36"x20" table, : 12" column, 4 ft. arm, 36"x20" table.
|
|
| Ad # 9173 | Radial Drill Press |
| — |
american tool works |
hole wizard |
Good |
2995.00 |
No Photo /
More Info. |
| 60" z travel, arm travel 56", column 11" dia: American Hole Wizard 5 x 15 Radial drill-Please verify std specs below..
Model : American Hole Wizard
Drills to center of circle : 3050mm (120")
Vertical traverse of spindle : 457mm (18")
Spindle taper : No.5 MT
Spindle diameter : 75mm (3")
Distance spindle to column : 14" Minimum / 60" Maximum
Distance spindle to base : 7" Minimum / 67" Maximum
Traverse of Head on arm : 1194mm (47")
Traverse of arm on column : 1067mm (42")
Feed range : (16 settings) .003" to 0.125"
Spindle speeds : (32 settings) 15 to 1100 RPM
Motor power : 15hp 220-440 /3 / 60hz
Equipped with Power elevation & locking
11" column dia
5 ft arm , 56 in travel
machine is in good working shape |
|
| Ad # 9023 | Radial Drill Press |
| 78? |
Fosdick |
4ft sensitive |
Very Good |
5295.00 |
Photo /
More Info. |
| 4ft arm -12in column-3hp: LENGTH x COLUMN DIAMETER ..... 4' X 12"
AREA OF BASE (T-SLOTTED) ......... 53" X 30"
AREA OF TILT TABLE (T-SLOTTED) ... 42" X 24" SPINDLE SPEEDS ............. 60 TO 1200 RPM
SPINDLE FEEDS .................... (4) .002/.004/.007/.010 IPR
SPINDLE STROKE ................... 10" SPINDLE DIAMETER ................. 2-1/4"
SPINDLE TAPER .................... #4 MT
SPINDLE TO COLUMN ................ 48΄΄ MAX. / 9" MIN.SPINDLE TO TILT TABLE ............ 23-1/2" MAX.SPINDLE TO BASE .................. 45" MAX. / 35" MIN.BASE HEIGHT ...................... 6-1/4"
POWER TABLE ELEVATION ............ YES
TAPPING .......................... ?
SPINDLE MOTOR .................... 3 HP
|
|
| Ad # 8386 | Radial Drill Press |
| — |
CARLTON |
1A |
Good |
10, 500 |
Photo /
More Info. |
| 4ft x 11in CARLTON RADIAL ARM DRILL: USED 4' X 11΄΄ CARLTON RADIAL ARM DRILL
WORKING SURFACE OF DOUBLE END BASE:52΄΄ X 36΄΄
SPINDLE STROKE:12΄΄
SPINDLE SPEEDS:(12) 120 TO 3000 RPM
FEEDS:(6) .006 TO .025 IPR
SPINDLE TAPER:#4 MT
POWER CLAMPING COLUMN ONLY:YES
MANUAL HEAD TRAVERSE:YES
DOUBLE END BASE:YES
POWER ELEVATION:YES
MOTOR, HORSEPOWER:5 |
|
| Ad # 8384 | Radial Drill Press |
| — |
GIDDINGS & LEWIS |
04 X 09 |
Good |
8950.00 |
Photo /
More Info. |
| 4' X 9΄΄ : 4' X 9΄΄ GIDDINGS & LEWIS RADIAL DRILL
AREA OF BASE:53΄΄ X 30΄΄
SPINDLE SPEEDS:(9) 175 TO 2500 RPM
FEEDS:.004 TO .020 IPR
SPINDLE TRAVEL:10΄΄
DIAMETER OF SPINDLE:2-1/2΄΄
TAPER IN SPINDLE:#4 MT
DISTANCE SPINDLE TO BASE:24΄΄ MIN / 54΄΄ MAX
DISTANCE SPINDLE TO COLUMN:11΄΄ MIN / 48΄΄ MAX
TAPPING CYCLE
POWER ARM ELEVATION
COOLANT
5 HORSEPOWER MOTOR |
|
| Ad # 8379 | Radial Drill Press |
| — |
ITALY |
3L |
Good |
2,950.00 |
Photo /
More Info. |
| 3ft X 8in ITALY RADIAL DRILL: 3' X 8΄΄ ITALY RADIAL DRILL
AREA OF BASE:38΄΄ X 25΄΄
SPINDLE SPEEDS:(12) 60 TO 2000
FEEDS:.004, 008 & .012
SPINDLE TRAVEL:7΄΄
DIAMETER OF SPINDLE:2-1/2΄΄
TAPER IN SPINDLE:#3MT
DISTANCE SPINDLE TO FACE OF COLUMN:6" MIN, 36" MAX
SPINDLE TO BASE:48΄΄ MAXIMUM
TRAVEL OF ARM ON COLUMN:27-1/4΄΄
TRAVEL OF HEAD ON ARM:26-1/2΄΄
POWER ARM ELEVATION:YES
MOTOR, HORSEPOWER:2-1/2 |
|
| Ad # 8380 | Radial Drill Press |
| — |
CINCINNATI |
03 x 09 |
Good |
3,950.00 |
Photo /
More Info. |
| 3ft X 9in CINCINNATI RADIAL DRILL: 3' X 9΄΄ CINCINNATI RADIAL DRILL
AREA OF BASE:41΄΄ X 30΄΄ EACH
SPINDLE SPEEDS:(9) 75 TO 1500 RPM
FEEDS:(4) .004 TO .020 IPR
SPINDLE TRAVEL:8΄΄
TAPER IN SPINDLE:#4 MT
DISTANCE SPINDLE TO BASE:52-1/2΄΄ MAXIMUM
VERTICAL ARM TRAVEL ON COLUMN:27-1/4΄΄
HORIZONTAL HEAD TRAVEL ON ARM:27-1/4΄΄
MANUAL COLUMN CLAMP:YES
MANUAL CLAMP OF SPINDLE ON ARM:YES
POWER ELEVATION:YES
MOTOR:3 HORSEPOWER SPINDLE MOTOR |
|
| Ad # 8394 | Radial Drill Press |
| 1964 |
CARLTON |
06 X 15 |
Good |
29,500. |
Photo /
More Info. |
| 6' X 15΄΄ : 6' X 15΄΄ CARLTON RADIAL DRILL
AREA OF BASE:74΄΄ X 42΄΄
SPINDLE SPEEDS:(36) 15 TO 1500 RPM
FEEDS:(18) .OO4 TO .125 FPM
THREADS:8, 11-1/2, 14, 18
SPINDLE TRAVEL:18΄΄
TAPER IN SPINDLE:#5 MT
DIAMETER OF SPINDLE:3-1/4΄΄
DISTANCE SPINDLE TO BASE:26" MINIMUM, 66" MAXIMUM
DISTANCE SPINDLE TO COLUMN:15" MIN, 72" MAX
MACHINE EQUIPPED WITH:POWER HEAD TRAVERSE, POWER CLAMPS, POWER ELEVATION AND COOLANT
15 HP SPINDLE DRIVE MOTOR |
|
| Ad # 8383 | Radial Drill Press |
| — |
CARLTON |
04 x 09 |
Good |
Call |
Photo /
More Info. |
| 4' X 9΄΄ : 4' X 9΄΄ CARLTON RADIAL DRILL
AREA OF BASE (T-SLOTTED:53΄΄ X 30΄΄
SPINDLE SPEEDS:(9) 109 TO 1500 RPM
SPINDLE FEEDS:.006, .011, .015, .020 IPR
SPINDLE STROKE:9΄΄
SPINDLE DIAMETER:2-1/2΄΄
SPINDLE TAPER:#4 MT
SPINDLE TO COLUMN FACE:9΄΄ MIN, 48΄΄ MAX
SPINDLE TO BASE:18΄΄ MIN, 53΄΄ MAX
TRAVEL OF ARM ON COLUMN:26΄΄
POWER ELEVATION":YES
COOLANT:YES
MOTOR, HORSEPOWER:3 |
|
| Ad # 8389 | Radial Drill Press |
| 1970 |
IKEDA |
RM-1300 |
Good |
10,500.00 |
Photo /
More Info. |
| 4ft X 13in IKEDA RADIAL DRILL : 4' X 13΄΄ IKEDA RADIAL DRILL
ARM LENGTH X COLUMN DIAMETER:4' X 13-5/8΄΄
AREA OF BASE (T-SLOTTED):52΄΄ X 36΄΄
SPINDLE SPEEDS:(12) 30 TO 1440 RPM
SPINDLE FEEDS:.004-.008-.013-.021 IPR
SPINDLE DIAMETER:3-3/8΄΄
SPINDLE STROKE:10΄΄
SPINDLE TAPER:#5 MT
SPINDLE TO COLUMN:10΄΄ MIN. / 48΄΄ MAX.
SPINDLE TO BASE:15΄΄ MIN. / 49΄΄ MAX.
BASE HEIGHT:8-1/2΄΄
COLUMN CLAMPING:POWER
ARM ELEVATION:POWER
HEAD TRAVERSE:POWER
COOLANT:YES
SPINDLE MOTOR:5 HORSEPOWER |
|
| Ad # 8393 | Radial Drill Press |
| — |
IKEDA |
RM1500 |
Good |
8950.00 |
Photo /
More Info. |
| 5' X 13΄΄: 5' X 13΄΄ IKEDA RADIAL DRILL
DIAMETER OF COLUMN:13-5/8΄΄
LENGTH OF ARM:5'
DRILLING CAPACITY IN MILD STEEL:1-3/4΄΄
DRILLING CAPACITY IN CAST IRON:2-1/8΄΄
TAPPING IN MILD STEEL:1-3/8΄΄
TAPPING IN CAST IRON:2-1-5/8΄΄
MORSE TAPER IN SPINDLE:#5
SPINDLE STROKE:12΄΄
SPINDLE SPEEDS:(12) 30 TO 1440 RPM
SPINDLE FEEDS:(9) .004 TO .021
MAX. DISTANCE COLUMN TO SPINDLE CENTER:60΄΄
MIN. DISTANCE COLUMN TO SPINDLE CENTER:10-1/2΄΄
MAX. DISTANCE SPINDLE TO BASE:56΄΄
MIN. DISTANCE SPINDLE TO BASE:15΄΄
POWER CLAMPING AND POWER ELEVATION:YES
MOTOR:5 HORSEPOWER MOTOR
ELEVATING MOTOR:1-1/2 HORSEPOWER |
|
| Ad # 8390 | Radial Drill Press |
| 1974 |
OOYA |
RE- 1225H |
Good |
10,500.00 |
Photo /
More Info. |
| 4' x 13": 4'x 13" OOYA RADIAL DRILL
COLUMN DIAMETER:13΄΄
AREA OF BASE:52΄΄ X 30΄΄
SPINDLE SPEEDS:(12) 38 TO 1985 RPM
SPINDLE FEEDS:(6) .003 TO .039 IPR
SPINDLE TRAVEL:12΄΄
TAPER IN SPINDLE:#5 MT
DIAMETER OF SPINDLE:3΄΄
DISTANCE SPINDLE TO COLUMN:9΄΄ MINIMUM / 48΄΄ MAXIMUM
DISTANCE SPINDLE TO BASE:24΄΄ MINIMUM / 52΄΄ MAXIMUM
POWER ELEVATION
POWER CLAMP
COOLANT
5 HORSEPOWER MAIN MOTOR |
|
| Ad # 8395 | Radial Drill Press |
| — |
CARLTON |
3A |
Good |
29,500.00 |
Photo /
More Info. |
| 6ft X 17in CARLTON RADIAL DRILL: 6' X 17΄΄ CARLTON RADIAL DRILL
WORKING SURFACE OF BASE:78΄΄ X 48΄΄
SPINDLE SPEEDS:(36) 12 TO 1200 RPM
SPINDLE FEEDS:(18) .004 TO .125 IPR
TAP LEADS:8 / 11-1/2 / 14 / 18
SPINDLE TRAVEL:18΄΄
DIAMETER OF SPINDLE:3-3/16΄΄
TAPER IN SPINDLE:#5 MT
DISTANCE SPINDLE TO BASE:14-1/2΄΄ MIN / 72΄΄ MAX
DISTANCE SPINDLE TO COLUMN:13-1/4΄΄ MIN / 72΄΄ MAX
POWER COLUMN AND HEAD CLAMPING:YES
POWER HEAD TRAVERSE:YES
POWER ARM ELEVATION:YES
MOTOR:15 HORSEPOWER
|
|
| Ad # 8387 | Radial Drill Press |
| 93? |
FOSDICK |
SENSITIVE |
Good |
7,950.00 |
Photo /
More Info. |
| 4' X 12΄΄ : 4' X 12΄΄ FOSDICK RADIAL DRILL
WORKING SURFACE OF TABLE:42 X 24΄΄
WORKING SURFACE OF BASE:62΄΄ X 30΄΄
SPINDLE SPEEDS:(9) 75 - 1500 RPM
FEEDS:(4) .002 TO .010 IPR
TAPPING CYCLE
SPINDLE TRAVEL:10΄΄
DIAMETER OF SPINDLE:2-3/4΄΄
TAPER IN SPINDLE:#4MT
VERTICAL TABLE TRAVEL (POWER):18΄΄
DISTANCE SPINDLE TO TABLE:0΄΄ TO 23-1/2΄΄
DISTANCE SPINDLE TO BASE:35΄΄ MINIMUM TO 45΄΄ MAXIMUM
DISTANCE SPINDLE TO COLUMN:9΄΄ MINIMUM TO 48΄΄ MAXIMUM
TRAVEL OF HEAD ON COLUMN:39΄΄
POWER TABLE TRAVERSE
COOLANT
3 HORSEPOWER MAIN MOTOR |
|
| Ad # 8391 | Radial Drill Press |
| — |
CARLTON |
3A |
Good |
12,500 |
Photo /
More Info. |
| 4' X 13΄΄ : 4' X 13΄΄ CARLTON RADIAL DRILL
SPINDLE SPEEDS:(36) 15 TO 1500 RPM
FEEDS:(18) .004΄΄ TO .125΄΄
SPINDLE TRAVEL:18΄΄
DIAMETER OF SPINDLE:3-3/16΄΄
TAPER IN SPINDLE:5MT
DISTANCE CENTER OF SPINDLE TO COLUMN:15΄΄ MIN, 4' MAX
DISTANCE SPINDLE TO BASE:10-1/2΄΄ MIN, 5' MAX
TRAVEL OF HEAD ON ARM:2'9΄΄
TRAVEL OF ARM ON COLUMN:2'7-1/2΄΄
POWER ELEVATION:YES
POWER COLUMN CLAMP:YES
COOLANT:YES
SPINDLE MOTOR:10 HORSEPOWER
|
|
| Ad # 8220 | Radial Drill Press |
| — |
Carlton |
6ft x 11in |
Good |
— |
Photo /
More Info. |
| 6ft x 11in Carlton Radial Arm Drill: Arm Length: 6'
Column diameter: 11"
|
|
| Ad # 8150 | Radial Drill Press |
| — |
Johansson |
Johansson Radial Drill |
Good |
2290.00 |
Photo /
More Info. |
| 40" x 20" Johansson Boxway "Y" Drill: Table: 40" x 20"
Auto Up-feed (Table)
3MT spindle
26" throat max
2HP
Box Ways in "Y" Axis
Spindle Feed: 105-1,20 rpm
Spindle Power: 1 hp
Approx" 49" Throat |
|
| Ad # 8098 | Radial Drill Press |
| — |
FOSDICK |
4ft x 12in Sensitive |
Very Good |
4,950.00 |
Photo /
More Info. |
| 4' X 12" FOSDICK "SENSITIVE" RADIAL DRILL: LENGTH x COLUMN DIAMETER ..... 4' X 12"
AREA OF BASE (T-SLOTTED) ......... 53" X 30"
AREA OF TILT TABLE (T-SLOTTED) ... 42" X 24" SPINDLE SPEEDS ............. (9) 62 TO 2500 RPM
SPINDLE FEEDS .................... (4) .002/.004/.007/.010 IPR
SPINDLE STROKE ................... 10" SPINDLE DIAMETER ................. 2-1/4"
SPINDLE TAPER .................... #4 MT
SPINDLE TO COLUMN ................ 48΄΄ MAX. / 9" MIN.SPINDLE TO TILT TABLE ............ 23-1/2" MAX.SPINDLE TO BASE .................. 45" MAX. / 35" MIN.BASE HEIGHT ...................... 6-1/4"
TABLE TILT ....................... 360 DEGREES
POWER TABLE ELEVATION ............ YES
TAPPING .......................... YES
SPINDLE MOTOR .................... 2-1/2 HP
|
|
| Ad # 7923 | Radial Drill Press |
| — |
Cincinnati Bickford |
9in column, 4' arm |
Good |
4,250.00 |
Photo /
More Info. |
| 9" column, 4' Arm Radial Arm Drill: Column: 9" diam.
Arm: 4'
Head: 3 hp Gear Driven
Spindle forward/rev switch
Spindle Size: MT 4
0.004, 0.008, 0.014 & 0.020"/rev down feed
Spindle Speeds: 300 - 1090 rpm in 9 steps
Travel: Arm 25"
Table: 20" x 24"
Table tilt: 45 deg
Coolant System |
|
| Ad # 7910 | Radial Drill Press |
| — |
AMERICAN |
Hole Wizard, 17 in |
Good |
8,750.00 reduced |
Photo /
More Info. |
| 17" Column, 66" Radial Arm Drill: Vertical Travel: 48"
Machine Base Table: 52" x 84"
Coolant Sysyem
|
|
| Ad # 7862 | Radial Drill Press |
| 1951 |
Cincinnati Gilbert |
48" |
Good |
2,500.00 |
Photo /
More Info. |
| 48" Radial Arm Drill Press Cincinnati Gilbert: Power Clamp
Auto Feed
5HP |
|
| Ad # 7769 | Radial Drill Press |
| — |
Hammond |
— |
Good |
1,795.00 |
No Photo /
More Info. |
| —: Oldie, but a Goodie - This is an old Hammond radial arm drill press. It sti... |
|
| Ad # 7732 | Radial Drill Press |
| — |
G & L |
951 |
Fair |
3000 |
Photo /
More Info. |
| —: Make offer owner needs space. Asking $ 3,000 |
|
| Ad # 7257 | Radial Drill Press |
| 1981 |
YAMAZEN |
TRE-2500D |
Very Good |
27,500.00 |
Photo /
More Info. |
| 82 x 20 7/8 YAMAZEN YMZ Radial Drill Model TRE-2500D: 82 x 20 7/8 YAMAZEN YMZ Radial Drill Model TRE-2500D
Arm length 82
Column diameter 20 7/8
Taper in spindle No. 5 M.T.
Drilling capacity:
Solid steel 3 Ύ
Cast iron 4 ½
Boring in steel 10 5/8
Boring in cast iron 13 3/8
Diameter of spindle 3 1/8
Diameter of spindle quill 4 ½
Spindle travel 19 5/8
Max. distance, column to spindle center 99 3/16
Min. distance, column to spindle center 16 1/8
Horizontal travel of spindle head on arm 83 1/16
Max. distance, spindle to base 68 7/8
Min. distance, spindle to base 17 Ύ
Vertical travel of arm on column 33 15/32
Size of base 47 Ό x 137 Ύ
Height of base 11
24 Spindle speeds 20-2000 RPM
18 Feeds .0015-.125 IPR
Tap leads 8,11 ½,14,18,27 T.P.I.
EQUIPPED WITH:
T-Slotted base
20x 30x 19 High T-Slotted box table
(3)T-Slots in top, (2) T-Slots in side
Power clamping
Work light
5 M.T. Quick-Change holder
Quick change tool w/drill chuck
5 H.P. arm elevation Motor
15 H.P. Spindle drive Motor
Max. height above column cap: 115 1/8
Max. height above head: 135 1/8 |
|
| Ad # 7178 | Radial Drill Press |
| S.Ittner |
PHASE-A-TRON |
Scott Ittner, Oscoda, MI |
Needs Work |
PHASE-A-TRON |
Photo /
More Info. |
| Phase Convertors, PHASE-A-TRON. Oscoda, MI: NOTE TO POTENTIAL CUSTOMERS!!
THE OWNER OF THIS MACHINE HAS BEEN PAID FOR THIS MACHINE INCLUDING FREIGHT CHARGES AND NOW, AFTER A MONTH WAITING WE HAVE NOT GOT THE MACHINE NOR WILL HE RETURN OUR CALLS.
WE DO NOT RECOMMEND THAT YOU DO ANY BUSINESS WITH THIS COMPANY
THE COMPANY NAME IS PHASE-A-TRON OF STANDISH/Oscoda, MI
OWNER: SCOTT ITTNER
TEL: 989-820-4125
CALL US FOR MORE DETAIL BUT BUYER BEWARE OF THIS GUY!!
|
|
| Ad # 6653 | Radial Drill Press |
| — |
CARLTON |
— |
Good |
19,500.00 |
Photo /
More Info. |
| 8' x 22" CARLTON Radial Drill: 8' x 22" CARLTON Radial Drill
Arm length: 8'
Diameter of column: 22"
Maximum spindle radius: 9'3"
Minimum spindle radius: 2'6"
Max.distance, spindle to base: 98"
Min.distance, spindle to base: 20 1/2"
Working surface of base: 61"W x 102"L
Overall length of base: 170"
Height of base: 12 1/2"
Vertical travel of spindle in head: 24"
Spindle diameter: 4"
Taper in spindle: No.6MT
Traverse of arm on column: 531/2"
Traverse of head on arm: 81"
36 spindle speeds: 8 to 800 RPM
18 feeds: .004 to .125 IPR
Tap leads: 8,11, 14, 18 TPI
EQUIPPED WITH:
(NEW) Spindle installed 2002
281/4" x 321/4" x 24" High, Carlton T-slotted, Tilting box table
T-slotted base
Power rapid traverse to head
Power column clamping
Hardened wear strip on arm
25 H.P. 3/60/220-440 Volt Main Drive Motor with controls
Max. height over column cap: 13'8"
Max. height over head: 14'7" |
|
| Ad # 6649 | Radial Drill Press |
| 1990 |
SORALUCE |
TR3x3051 |
Very Good |
17,500.00 |
Photo /
More Info. |
| 6 1/2' x 19 11/16" SORALUCE Radial Drill Model TR3X3051: 6 1/2' x 19 11/16" SORALUCE Radial Drill Model TR3X3051
Arm length 6 1/2'
Column diameter 19 11/16"
Taper in spindle No.6 M.T.
Drilling capacity:
Solid steel 3 1/8"
Cast iron 4"
16 Spindle speeds 23-1650 RPM
9 Feeds .002-.032 IPR
EQUIPPED WITH:
T-Slotted base
Electric hydraulic clamping
Hydraulic pre-selection of speeds
T-Slotted box table
15 H.P. AC Motor w/ controls |
|
| Ad # 5183 | Radial Drill Press |
| — |
Cincinati-Brickford |
5E707 |
Good |
17,900.00 |
Photo /
More Info. |
| Large 6' arm x 16" column drill: 6' arm x 16" column dia.
4' x 14' base
20 HP
5" spindle
tilt work table
|
|
| Ad # 5078 | Radial Drill Press |
| — |
Wilton (Besozzi) |
40C |
Good |
5,950 |
No Photo /
More Info. |
| Wilton Besozzi Radial Drill Press: Power Elev, T-slotted Box Table, Coolant, Chuck included. |
|
| Ad # 9797 | Radial Drill Press |
| 1942 |
American |
hole wizard |
Very Good |
sold |
Photo /
More Info. |
| 5ft.x15"column: 15" column
5ft. arm travel
1600 RPM max
5MT spindle
tapping
collets included-C33: # 3MT & # 4MT
chuck-C5
maunal
box table
vise
10hp motor |
|
| Ad # 6654 | Radial Drill Press |
| 1953 |
KAUKAUNA |
140U |
Good |
sold |
Photo /
More Info. |
| #140U KAUKAUNA Universal Radial Drill on Bed: #140U KAUKAUNA Universal Radial Drill on Bed
Drilling area 84 x 144
Spindle diameter 4
Drilling capacity 3
Morse taper in spindle nose No. 6MT
Spindle travel 18
Column diameter 22
Reach-center on spindle to center
of column, spindle vertical 106
Distance center of horizontal spindle
to floor max. 163; min. 79
Distance - nose of vertical spindle
to floor max. 108; min. 6
Horizontal travel - column on runway 144
Traverse rate on runway 80 IPM
Vertical travel of head on column 84
Traverse rate on column 80 IPM
Traverse of head and rail on rail slide 36
Traverse rate of rail 60 IPM
Swivel of head on trunnion 360Ί
Swivel of trunnion on rail 180Ί
Column swivel 360Ί
Height of runway 161/2
Length of runway 18'
Width of runway 56
9-Spindle speeds 35 to 600 RPM
9-Spindle feeds .0035 to .062 IPR
EQUIPPED WITH:
Hardened replaceable bedways
96 Extra column travel on bed
24 Extra vertical travel on column
Lifting ear on top of column cap. for portable use
Electric clamping of column swivel
Power clamping to all movements
Power rapid traverse
Rack and pinion drives, vertical & horizontal
Pendant control
10 H.P. 3/60/220-440 volt, 1740 RPM spindle drive
motor w/controls
Height over column cap.: 20' 6 |
|
| Ad # 6652 | Radial Drill Press |
| 1943 |
CARLTON |
— |
Very Good |
Sold |
Photo /
More Info. |
| 8' x 19" CARLTON Radial Drill: 8' x 19" CARLTON Radial Drill
Arm length: 8'
Diameter of column: 19"
Maximum spindle radius: 9' - 3/4"
Minimum spindle radius: 25 1/2"
Maximum distance spindle to base: 78"
Minimum distance spindle to base: 10"
Working surface of base: 48" x 101"
Height of base: 10"
Vertical travel of spindle in head: 20"
Spindle diameter: 4"
Taper in spindle: No. 6 M.T.
Traverse of arm on column: 48"
Traverse of head on arm: 83 1/4"
Infinitely variable spindle speeds (with 96 changes): 10 to 1250 RPM
18 Feeds: .004 to .125 IPR
Tap leads: 8-11 1/2-14-18
EQUIPPED WITH: T-slotted base
Power column clamping
Manual clamping of head
Hardened wear strip on arm
20 H.P. 230 volt DC motor with solid-state SCR control
MAXIMUM HEIGHT OVER COLUMN CAP: 11'8"
MAXIMUM HEIGHT OVER HEAD: 144" |
|
| Ad # 6651 | Radial Drill Press |
| 1956 |
CARLTON |
— |
Very Good |
Sold |
Photo /
More Info. |
| 6' x 17" CARLTON Radial Drill: 6' x 17" CARLTON Radial Drill
Length of arm: 6'
Diameter of column 17"
Face of column to center of spindle:
Maximum: 72"
Minimum: 13 1/4"
Maximum spindle radius: 85 3/4"
Maximum spindle to base: 72"
Minimum spindle to base: 14 1/2"
Working surface of base: 50" x 77"
Height of base: 10"
Vertical travel of spindle in head: 20"
Spindle diameter: 4"
Taper in spindle: No. 6 M.T.
Traverse of arm on column: 37 1/2"
Traverse head on arm: 58 1/4"
36 Spindle speeds: 15 to 1500 RPM
18 Feeds: .004 - .125 IPR
Tap leads: 8-11 1/2 - 14 - 18 T.P.I.
EQUIPPED WITH: T-slotted base with coolant pump
24" x 30" x 20"High, t-slotted box table
Power rapid traverse of head
Power clamping
20 H.P. 3/60/220-440 volt motor with controls
MAXIMUM HEIGHT OF HEAD: 140"
MAXIMUM HEIGHT OVER COLUMN CAP: 135" |
|
| Ad # 6648 | Radial Drill Press |
| 1996 |
NARDINI |
FRN-60/1600 |
Excellent |
Sold |
Photo /
More Info. |
| 5 x 15 FRN-60/1600 NARDINI Radial Drill: 5' x 15" FRN-60/1600 NARDINI Radial Drill
Maximum spindle radius 63"
Column diameter 15"
Drilling capacity in solid steel 2 3/8"
Drilling capacity in cast iron 3 1/8"
Boring capacity in steel 3-15/16"
Boring capacity, cast iron 4 3/4"
Tapping capacity in steel 2
Tapping capacity, cast iron 2 3/4"
Spindle diameter 3-9/16"
Vertical spindle travel 13 3/4"
Taper in spindle No. 5 M.T.
Max. height spindle to base 62"
Min. height spindle to base 13 3/4"
Horizontal travel of head on arm 52 3/8"
Working surface of base 35 1/4" x 64"
Height of base 8 5/8"
Vertical travel of arm on column 34 1/2"
12 spindle speeds 29-1450 RPM
6 feeds .002-.017 IPR
EQUIPPED WITH:
T-slotted base
30" x 30" x 18"High T-slotted box table (slotted top and side
Coolant pump in base
Coolant splash guard
Power column clamping
(1) Drill holder
Motor amp meter
1 H.P. clamping motor
2 H.P. arm elevation motor
10 H.P. 3/60/200-230-460 volt spindle drive motor
Max. height above column: 119 1/2"
Max. height above headstock: 129 7/8"
Dimensions: 109 3/8"LR x 119 1/2"High |
|
| Ad # 6280 | Radial Drill Press |
| — |
Johannson |
Tool room model |
Very Good |
Sold |
Photo /
More Info. |
| —: Small radial drill press. Tool room size. Power feed, power tap, power up/d... |
|
| Ad # 1895 | Radial Drill Press |
| 1966 |
Asquith |
P3000 |
Good |
Sold |
Photo /
More Info. |
| ODI Radial Arm Drill: 4' Arm travel
9" dia. Column
33 x 42 Table
4 MT Spindle |
|
| Ad # 2929 | Radial Drill Press |
| — |
NARDINI |
FRN-60 |
Very Good |
SOLD |
Photo /
More Info. |
| BABIN BOLT 100 BOLT CIRCLE DRILL 5 NARDINI RADIAL ARM DRILL : Drilling capacity in mild steel 2
Main motor .... 10 hp.
Spindle speeds ........ 29-1450 rpm, 12 steps
Spindle Taper ........ 40 Taper
Column Size ............................ 14
Equipped with:
Coolant Yes
Power Clamping ................... Yes
Power elevation ................... Yes
Table ................................ No
|
|
| Ad # 9362 | Radial Drill Press |
| 1973 |
Summit |
7ft |
Very Good |
sold |
Photo /
More Info. |
| Large -Radial Drill - 18" Dia Column x 80in travel: 17-3/4 " Dia Column
7ft arm
92" arm total length
84" throat/travel
12 HP
8.5" vise
30 x 35" box table on base
Spindle: 5MT
Motor: 12hp verify
drilling/tapping
metric & inch feed/threads
RPM: 25-1950
Machine made in italy-quality |
|
| Ad # 8382 | Radial Drill Press |
| 2000 |
VICTOR |
Z3032X10/1 |
Good |
Sold |
Photo /
More Info. |
| 4' X 9΄΄ : 4' X 9΄΄ VICTOR RADIAL DRILL
SPINDLE SPEEDS:(16) 32 TO 2500 RPM
SPINDLE FEEDS:(8) .003΄΄ TO .039΄΄ IPR
STROKE OF SPINDLE:11΄΄
TAPER IN SPINDLE:#4 MORSE TAPER
DRILLING CAPACITY:1-3/8΄΄
DISTANCE SPINDLE TO COLUMN:12'' TO 40΄΄
DISTANCE SPINDLE NOSE TO BASE:8΄΄ TO 38-3/4΄΄
T-SLOTTED BOX TABLE:YES
COOLANT:YES
POWER ELEVATION:YES
SPINDLE MOTOR:3 HORSEPOWER
|
|
| Ad # 8381 | Radial Drill Press |
| — |
CINCINNATI |
03 x 09 |
Good |
sold |
Photo /
More Info. |
| 3' X 9΄΄ : DIAMETER OF COLUMN:9΄΄
AREA OF BASE:41΄΄ X 30΄΄, T SLOTS
SPINDLE SPEEDS:(18) 55 TO 2250 RPM
FEEDS:(4) .002 TO .010 IPR
SPINDLE TRAVEL:10΄΄
TAPER IN SPINDLE:#4 MT
DISTANCE SPINDLE TO BASE:53΄΄ MAXIMUM, 12΄΄ MINIMUM
VERTICAL ARM TRAVEL ON COLUMN:28΄΄
DISTANCE COLUMN TO SPINDLE:38΄΄ MAXIMUM, 14΄΄ MINIMUM
SWING AWAY AXILLARY TABLE:16΄΄ X 26.5΄΄, T SLOTS
HEIGHT OF SWING AWAY TABLE FROM BASE:20΄΄
MANUAL COLUMN CLAMP:YES
MANUAL CLAMP OF SPINDLE ON ARM:YES
POWER ELEVATION:YES
COOLANT:YES
MOTOR:3 HORSEPOWER, 2 SPEED
|
|
| Ad # 8392 | Radial Drill Press |
| — |
IKEDA |
RM1300 |
Good |
Sold |
Photo /
More Info. |
| 4' X 13΄΄ : 4' X 13΄΄ IKEDA RADIAL DRILL
LENGTH OF ARM:51.25΄΄
DIAMETER OF COLUMN:13-5/8΄΄
DRILLING CAPACITY: 2-1/4΄΄ MILD STEEL; 2-5/8΄΄ CAST IRON
TAPPING CAPACITY:1-3/4΄΄ MILD STEEL; 2΄΄ CAST IRON
SPINDLE SPEEDS:(12) 30-1440 RPM
FEED RANGE:(4) .004-.021 IPR
QUILL TRAVEL:12΄΄
SPINDLE TAPER:MT#5
VERTICAL SPINDLE TRAVEL:28΄΄
COLUMN TO BASE DISTANCE:31" MINIMUM TO 59 MAXIMUM
POWER CLAMPING:YES
POWER ELEVATION:YES
RELIANCE VARIABLE SPEED DRIVE:YES
FORWARD/REVERSE TAPPING CONTROL:YES
COOLANT IN BASE:YES
MOTOR:5 HORSEPOWER |
|
| Ad # 4567 | Radial Drill Press |
| 1962 |
SASS |
TRP 3000 |
Excellent |
Sold |
No Photo /
More Info. |
| Sass TRP 3000 Radial Arm Drill: No Photos Available
Item # 4013 -- Basic Information
Category
Drilling & Tapping
Sub-Category
Drill, Radial
Manufacturer
SASS
Model
TRP 3000
Year
1962
Size
11' x 29.5"
FOB
Philadelphia, PA.
Price
$ 39500.00
Item # 4013 -- Full Description
Model TRP 3000, SASS 11 x 29.5 heavy duty radial arm drill, new 1962
Arm length 11
Column diameter 29.5
Swing radius 133
Spindle diameter 5.3
Spindle taper No. 6 M.T.
Drilling capacity, mild steel 5.9
Spindle feed traverse 24.8
Maximum distance, spindle to floor 147
Vertical traverse of arm on column 112
Spindle speeds (42) .06 to 1040 RPM
Spindle feeds .060 to 3.00 mm
Spindle horse power 35
EQUIPPED WITH:
78.7 x 236 T-slotted floor plate
39 x 39 x 20 T-slotted box table
Operators pendant control
Power rapid traverse
Power clamping of head and column
Work light
Coolant
Condition: Excellent
Price: F.O.B. Truck, Philadelphia, PA........................$39,500.
|
|
| Ad # 10100 | Radial Drill Press |
| 1966 |
Ikeda |
14" |
Good |
Sold |
Photo /
More Info. |
| 14"x 5': 14" column x 5ft arm
Has a number 5 moris taper.
Comes with box table. |
|
| Ad # 7256 | Radial Drill Press |
| 1941 |
AMERICAN HOLE WIZARD |
— |
Very Good |
Sold |
Photo /
More Info. |
| 5 x 15 AMERICAN HOLE-WIZARD Radial Drill: 5 x 15 AMERICAN HOLE-WIZARD Radial Drill
Arm length 5
Column diameter 15
Taper in spindle No.5 M.T.
Max. distance, spindle to base 66
Min. distance, spindle to base 6
Spindle travel 18
32 Spindle speeds 15-1200 RPM
16 Feeds .003-.125 IPR
Tap leads 8-11 ½-14-18 T.P.I.
Horizontal travel of head on arm 46 Ύ
Vertical travel of arm on column 42
Height of base 9
Size of Rt. Angle base 42W x 61L
EQUIPPED WITH:
T-Slotted right angle base
36x36x20 ½ High, T-Slotted box table
28x28x20 3/8 High, T-Slotted box table
Power clamping
Coolant pump in base
Motorized elevation
10 HP 3/60/220-440 Volt Motor and controls
Height over Column cap: 128 |
|
| Ad # 7255 | Radial Drill Press |
| 1976 |
WMW HECKERT |
BR40/2 x 1250 |
Excellent |
Sold |
Photo /
More Info. |
| 4' x 12" WMW HECKERT Radial Drill, Model BR40/2 x 1250: 4' x 12" WMW HECKERT Radial Drill, Model BR40/2 x 1250
Column diameter 12"
Maximum/Minimum distance from face of column 49.2"/11.8"
to centerline of spindle
Drilling capacity: Steel 1.77"
Cast iron 2.36"
Tapping capacity: Steel 1.5"
Cast iron 2"
Horizontal travel of head on arm 37-3/8"
Vertical travel of arm on column 29.3"
Vertical travel of spindle in head 14"
Minimum/Maximum distance, spindle to base 11"/54.3"
Size of base 36-1/4" F-B x 80-3/4" L-R
Height of base 8-3/4"
Spindle taper No.5 M.T. Morse
Infinitely variable spindle speeds in three geared 20-1,200 R.P.M
ranges for each speed of two speed motor
(6) Feeds .0025-.025 I.P.R.
Maximum height above spindle drive motor with 121-1/4"
the arm at the highest position on column
Maximum height above top of elevation motor 112"
Maximum height above column cap 96-1/2"
EQUIPPED WITH:
T-slotted base with coolant pump
27-1/2" x 27-1/2" x 19-3/4" High t-slotted (top and side) box table
Electro-mechanically actuated clamping of arm on column and head on arm
Motorized raising/lowering of arm on column
Changeover switch for drilling or tapping operations
Hardened steel ways on arm
Feed overload clutch
Mechanical tool ejector
1/8"-3/4" Capacity JACOBS drill chuck
1 H.P. clamping motor
2 H.P. arm elevation motor
3.5-5.9 H.P. 3/60/440 volt two-speed spindle drive motor and electrical controls |
|
| Ad # 7253 | Radial Drill Press |
| 1993 |
PITTLER WITZIG & FRANK |
LEO23AS |
Excellent |
Sold |
Photo /
More Info. |
| 3' PITTLER Witzig & Frank Radial arm drill with table, type LEO32AS: 3' PITTLER Witzig & Frank Radial arm drill with production table, type LEO3... |
|
| Ad # 7252 | Radial Drill Press |
| 1967 |
IKEDA |
RM-1300 |
Very Good |
Sold |
Photo /
More Info. |
| IKEDA Radial Drill, Model RM-1300: IKEDA Radial Drill, Model RM-1300
Capacity #5 M.T. Morse taper
Arm length 4
Column diameter 13
Spindle travel 12
Max. distance column face to spindle 10 Ύ min, 54 ½ max.
Max. distance spindle to base 15 7/14 min, 56 Ύ max.
12 Spindle speeds from 30 to 1440 RPM
4 Feeds from .004 to .021 IPR
EQUIPPED WITH:
T-Slotted base
Power clamping & power elevation to arm
Coolant pump in the base & piping
5 HP Spindle drive motor, 220/440/3/60
Tilting box table: 20x20 top, 20x12 side
12 Heavy duty swivel vise
Tapping reverse
57x 36 machined surface of base |
|
| Ad # 7254 | Radial Drill Press |
| 1990 |
JET |
JRD-939 |
Very Good |
Sold |
Photo /
More Info. |
| 3 x 9 ½ JET Radial Drill, Model JRD-939: 3 x 9 ½ JET Radial Drill, Model JRD-939
Column diameter 9 ½
Max. distance, spindle to column 39 3/8
Min. distance, spindle to column 11 Ύ
Taper in spindle No.4 M.T.
Drilling capacity:
Steel 1 9/16
Cast Iron 2 1/16
Tapping capacity:
Steel 1
Cast Iron 1 ½
Boring capacity:
Steel 3 3/8
Cast Iron 4 Ύ
Horizontal travel of head on arm 27
Max. distance, spindle to base 45
Min. distance, spindle to base 13
Vertical traverse of arm 30 Ύ
Spindle travel 11
Working surface of base 17 Ύ x 31 ½
16 Spindle speeds 32-2500 RPM
8 Feeds 0.0031-0.0394 IPR
EQUIPPED WITH:
T-Slotted base
17 Ύ x 23 Ύ x 17 ½ High T-Slotted box table
with 6 riser block
Electric column clamping
Quick change tool holder
Spindle reversing switch
Coolant system
Work light
1 H.P. arm elevation motor
3 H.P. 3/60/230-460 Volt Motor w/controls |
|
