Used Manual Milling Machines

Year	Make	Model	Condition	Price	Details

Ad # 8488		Vertical Boring Mills		Ad to Checklist
—	Cincinnati	# 3	Good	sold	Photo / More Info.
# 3: cincinnati # 3 Heavy duty Manual mill 50 taper spindle table size: 62" x 15" 18-1300 spindle RPM feeds 1/2-20 IPM17" throat includes 10" vise Also includes( 6 )50 taper holders...

Ad # 10462		Vertical Boring Mills		Ad to Checklist
—	Hauser	Type 5	Very Good	56,250	Photo / More Info.
Hauser Jig Borer Model Type 5, Table 30" X 35": Hauser Jig Borer, Type 5,30" X 30' * Very Good Condition* Table Working Surface 30" X 35" Longitudinal Table Travel 25" Cross Travel 20" Spindle Quill Travel 7" Spindle Center to Column Ways 28.5" Spindle Center to Column Below Ways 32" Boring Cap 9" Boring Speeds 45-2000RPM Automatic Feeds per Rev. (6) -.0008",.0014",.0020 -.0031",.0051" & .0080" Weight 7000

Ad # 10123		Vertical Boring Mills		Ad to Checklist
1969	WMW	BKOZ 800/1250	Very Good	call	Photo / More Info.
Jig-boring machine WMW BKOZ 800/1250: Jig-boring machine WMW BKOZ 800/1250 Year of manufacture: 1969 Manufacturer: WMW, Germany Good working condition Pass width between columns: 1080 mm; X: 1120 mm; Y: 710 mm; W: 630 mm; Table size: 800 x 1250 mm; Dimensions: 4200 x 2400 x 3400 mm; Weight of machine: 7500 kg Completeness: 100% Price: contact us All additional information and pictures are available on request

Ad # 10125		Vertical Boring Mills		Ad to Checklist
1970	Mitsui Seiki	J5A	Very Good	call	Photo / More Info.
Jig-boring machine J5A : Jig-boring machine J5A Mitsui Seiki Year of manufacture: 1970 Manufacturer: Mitsui Seiki, Japan Very good working condition Main data: Working spindle diameter: 60 mm Table size: 850 x 660 mm; X: 750 mm; Y: 500 mm; Z: 600 mm; Spindle speed: 40-2000 rpm; Spindle Stroke: 200 mm Completeness: 100% Price: contact us All additional information and pictures are available on request

Ad # 10124		Vertical Boring Mills		Ad to Checklist
1980	Dixi	F310	Excellent	call	Photo / More Info.
Jig-boring machine Dixi F 310: Jig-boring machine Dixi F 310 Yera of manufacture: 1980 Manufacturer: Dixi, Switzerland Excellent working condition Main data: Table size: 1000 x 850 mm; Table loading: 1500 kg; Spindle diameter: 120 mm; Flange diameter: 240 mm; X: 900 mm; Y: 900 mm; Z: 780 mm; Dimensions: 4300 x 3700 x 2500 mm Completeness of machine: 100% Price: contact us All additional information and pictures are available on request

Ad # 9172		Vertical Boring Mills		Ad to Checklist
80's?	moore	B18/ # 3	Good	2,795.00	Photo / More Info.
# 3 Jig bore mill-11x24 table : 18x24 work: 11 x 24 table hardened ways

Ad # 8514		Vertical Boring Mills		Ad to Checklist
—	Moore	PG/ST493102	Good	3,450.00	Photo / More Info.
10 x 16 in table: step pulley head speed control 10 x 16 table lots of tooling included , QC type 1/2 HP

Ad # 7295		Vertical Boring Mills		Ad to Checklist
1965	PRATT & WHITNEY	M1890	Excellent	17,500.00	Photo / More Info.
#2E PRATT & WHITNEY Precision Vertical Jig Borer, Model M1890: #2E PRATT & WHITNEY Precision Vertical Jig Borer, Model M1890, Rebuilt by C...

Ad # 6719		Vertical Boring Mills		Ad to Checklist
1952	GIDDINGS & LEWIS	Type 64, Hypro	Excellent	SOLD	Photo / More Info.
64” GIDDINGS & LEWIS Hypro Vertical Boring Mill, Type 64: 64” GIDDINGS & LEWIS Hypro Vertical Boring Mill, Type 64 Flush floor design, no pit required Diameter of table 62” Max. swing 67” Max. height under cross rail 55” Ram head vertical travel 32” Turret head vertical slide travel 27” Swivel of ram head ±60º Center line to housing face 15” Bore size in left ram 2 ¾” Bore size in turret 2 ¾” Table top to floor level 30” (16) Table speeds 3.3 to 90 RPM 16 Feeds .003-.500 IPR EQUIPPED WITH: T-Slotted table w/ set of (4) faceplate jaws L.H. Swivel ram head with 1 H.P. Dumore grinding spindle and LH10 Sony2-axes D.R.O. R.H. pentagon turret head with manual indexing and LH10 Sony 2-axes D.R.O. Roller table bearings Electric rail clamping Power rapid traverse Pendant control (replaced new 1988) Automatic lubrication (4) Square tool holders (3) Boring bars 50 H.P. 3/60/440 Volt Main drive Motor with control cabinet (replaced new 1988) Height to top of Machine: 10’8” Height above pendant control: 12’11”

Ad # 6197		Vertical Boring Mills		Ad to Checklist
1977	TOS	SK16	Excellent	Sold	Photo / More Info.
70" Mdl. SK16, TOS Vertical boring mill: 70" Mdl. SK16, TOS Vertical boring mill Table diameter 63.78" Maximum swing when turning with side head 66.93" Maximum swing without side head 74.5" Maximum height under cross rail 54.33" Maximum turning height under rail 50.79" Maximum vertical distance, side head toolholder to table 39.37" Vertical travel of cross rail 37.4" Vertical travel of L.H. ram 31.5" Vertical travel of R.H. turret slide 24.8" Horizontal travel of side head ram 24.8" Maximum table load capacity 11,000 lbs. Swivel of L.H. ram head on rail ±45°, -35° Infinitely variable table speeds 3.55 to 150 RPM 24 Feeds .0024 to 0.36 Rapid traverse rate 79 IPM EQUIPPED WITH: T-slotted table with set of (4) H.D. faceplate jaws LH swivel type ram head with square toolholder RH pentagon turret head RH side head with square toolholder SCAN-O-MATIC Hydraulic copying attachment mounted on LH ram head Infinitely variable table speeds Pendant control Power rapid traverse, all travels Power rail clamping Scales, all travels Centralized lubrication system (2) Square toolholders for turret 50 HP 3/60/380 volt variable speed commutator main drive motor with controls Maximum height, rail up: 186"

Ad # 6194		Vertical Boring Mills		Ad to Checklist
1975	TITAN	SC 1600	Good	Sold	Photo / More Info.
57" TITAN SC1600 Vertical Boring Mill: 57" TITAN SC1600 Vertical Boring Mill Diameter of table 57" Max. swing without side head 61" Max. swing with side head 61" Max. height of workpiece 47.24" Max. weight of workpiece 17,600 lbs. Max. travel center of R.H. head from table center 31.5" Max. travel center of L.H. head from table center 31.5" Vertical travel of turret head slide 29.92" Vertical traverse of L.H. ram head 39.37" Swivel of rail heads ± 35° Turret tool bore diameter 3.15" Side head vertical travel 43.3" Side head horizontal ram travel 27.56" Vertical traverse of cross rail 39.37" 16 Table speeds 4-200 RPM 16 feeds .00197-.197 IPR Rapid traverse rate to heads 98.5 IPM Rapid traverse rate to cross rail 15.75 IPM Top of table to floor 35.43" EQUIPPED WITH: 4-jaw chuck with set of (4) hardened top jaws and (2) sets of risers L.H. swivel type ram head on rail with square toolholder R.H. swivel type pentagon turret head on rail with manual indexing R.H. side head with square toolholder and 1-axis Itek digital readout Hydraulic rail clamping Power rapid traverse Motorized rail elevation Threading and taper turning attachment with change gears Full pendant control Motor amp meter Roller table bearings Centralized lub system Scales and verniers Turret tooling including: (8) turret boring bars, (6) square turret toolholders, (8) boring bars, drill holder Misc. tooling 5.5 H.P. rail elevation motor 4 H.P. rapid motors 60 H.P. A.C. main drive motor and controls Height over pendant, 168” height over ram head with rail and head in max. position

Ad # 6189		Vertical Boring Mills		Ad to Checklist
1973	BULLARD	Dynatrol Hi-Column	Excellent	SOLD	Photo / More Info.
46?BULLARD Dynatrol Hi-Column Vertical Boring Mill: 46?BULLARD Dynatrol Hi-Column Vertical Boring Mill Diameter of table 46?Max. swing 58?Max. height under cross rail 64?Vertical travel of cross rail 54?Vertical ram travel of rail head 51?Max. distance center of table to center of ram 26 ½” Center line of table to face of Bed ways 19?Swivel of ram head ?30?Distance top of table to floor 37?2 ranges of infinitely variable table speeds 27.7-83.2 RPM 111-333 RPM Infinitely variable feed rates .001-.250 IPR Rapid traverse rate 108 IPM EQUIPPED WITH: 4-jaw chuck with set of hardened top jaws 11?Heavy duty R.H. Swivel type ram head on rail with increased ram travel of 51?T.D.A. attachment for threading, angular turning, drum scoring with approx. (14) change gears Constant cutting speed control Model 270Scan-O-Matic 2-axis hydraulic Tracer attachment with power pak Power rail clamping Power rapid traverse Hardened, chromed strips on cross rail and ram head slide Centralized pendant control with pistol grip and speed and feed selection Trak 102 2-axis digital readouts Flood coolant system with pan, splash guards and pump (4) ram tool holders (4) ram boring bars 50 H.P. 240 Volt DC, 650/2000 RPM Main Drive Motor; 3:1 constant horsepower and 10:1 constant torque C-600 Westinghouse Variable speed Drive control with regenerative braking with 3/60/230-460 Volt hook-up Max. height over ram head with everything in max. positions: 205? Floor space required: 122”LR x 166”FB (Machine & Drive) 86”LR x 18”FB x 90”High (Cabinet)

Ad # 4646		Vertical Boring Mills		Ad to Checklist
1967	Moore	—	Very Good	Sold	Photo / More Info.
#1 1/2 B Moore Jig Boring Machine: Item # 3946 -- Basic Information Category Mills, Keyseaters, Jig Borers Sub-Category Jig Borers Manufacturer MOORE Model Year 1967 Size #1-1/2 FOB Wilmington, DE. Price $ 1750.00 Item # 3946 -- Full Description (1) Preowned #1 ¨ö B MOORE Jig Boring Machine, new 1967 Table working surface 10 ¨ö¡± x 19 ¨ö¡± Range: longitudinal 14¡± cross 9¡± Height, table top to spindle end minimum 3¡± maximum 16¡± Vertical adjustment of quill housing 9¡± Spindle quill travel 3 ¨þ¡± Spindle center to column ways 10¡± Spindle center to column below ways 12¡± Spindle speeds, infinitely variable 120-2400 RPM (2) Spindle speeds .001 and .003 IPR Maximum boring capacity tool steel 3¡± soft steel 5¡± EQUIPPED WITH: Quick-change drill chuck Way covers .5/1 H.P. 2-speed main drive motor Approximate weight: 2,300 lbs. Condition: Very good Price: F.O.B. Truck, Wilmington, DE...........$1,750.00

Ad # 7249		Vertical Boring Mills		Ad to Checklist
1958	KING	84"	Very Good	Sold	Photo / More Info.
—: 84” KING Hi-Column Vertical Boring Mill, lot 481 Flush floor design, no pit required Diameter of table 80” Max. swing 84” Max. height under cross-rail 72” Max., height under ram tool holder 70 ½” Max., height under turret face 82” Max. height under turret tool holder 77” Ram travel 72” Turret head slide travel 45” Swivel of ram head ±60º Swivel of turret head ±30º Distance table top to floor level 36” 16 table speeds 3.1 to 100 RPM 24 fine feeds .003-.500 IPR EQUIPPED WITH: T-Slotted table with set of (4) H.D. faceplate jaws L.H. Swivel turret head with square tool holder R.H. Swivel type pentagon turret head with manual index and large assortment of tool holders and boring bars Pendant controlled hydraulic speed shifting Motorized rail clamping Fine feeds Power rapid traverse 2-Axes Acu-Rite digital readout on turret head Timken table spindle bearings 12” extra column height Extra ram and turret head travels Scale and Verniers 50 H.P. 3/60/440 Volt Main Drive Motor and controls Max. height over ram head 17’9” Max. height over pendant control 14’7” Floor space required: 17’10” LR x 13’8” FB

Ad # 7250		Vertical Boring Mills		Ad to Checklist
1950	SCHIESS	13 EK125	Good	Sold	Photo / More Info.
54” SCHIESS Vertical Turret Lathe, Model 13EK125: 54” SCHIESS Vertical Turret Lathe, Model 13EK125 Diameter of table 47 ¼” Max.swing, with side head below table 55” Max.swing, with side head in position 52” Max.height under cross rail 43” Max.turret head slide travel 28” Max.distance, table to turret face 52” Horizontal travel of side head ram 26” Max.distance between table and bottom of side head ram 32” Vertical travel of cross rail 30” Max.weight of work piece 8,800 lbs. 12 Table speeds 8 to 126 RPM 8 Feeds .004 to .196 IPR Rapid traverse rate 89 IPM Swivel of turret head ±45º EQUIPPED WITH: T-slotted table with set of (4) faceplate jaws Swivel type pentagon turret head on rail with (3) toolholders Side head with square toolholder Power rapid traverse Motorized rail elevation Pan and coolant 40 H.P. 3/60/220-440 Volt Motor with controls

Ad # 7164		Vertical Boring Mills		Ad to Checklist
—	Atlantic	12 x 18 Table	Very Good	Sold	Photo / More Info.
12" x 18" Atlantic Jig Borer/Jig Grinder : Table Size: 12" x 18" Spindle: 3/4 hp, 10 Speed Dro (Heidenhain) in 2 axes ConAir System - 4 Heads: 300 rpm, 5,000 rpm, 10,000 rpm and 20,000 rpm Includeds Extension Tooling and two excentrics (Can go out to approx. 8" bore)

Processing Time: 0 wallclock secs ( 0.08 usr + 0.02 sys = 0.10 CPU)

Website Hosting & Development by IndSite.