| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10633 | Tool Room Lathe 8in. to 14in. swing |
| 87 |
Jet |
1340GHE/321351 |
Good |
1950.00 |
Photo /
More Info. |
| 13 x 40" 220/110 single phase: 13" Swing over bed ways, 8" swing over cross slide
inch/metric threading
coolant
QC tool post
8" 3 jaw chuck
3HP
70-2000RPM |
|
| Ad # 10571 | Tool Room Lathe 8in. to 14in. swing |
| 2005 |
Vectrax/MSC |
82837915 |
Excellent |
3495.00 |
Photo /
More Info. |
| 14" swing x 40" centers: 14 " swing x 40" centers
sheet metal base cabinet
1.5" spindle bore
steady rest & follower rest
6" 3 jaw chuck & 4 jaw 8 " chuck
std. toolpost
manuals and tool box
inch & metric threading
|
|
| Ad # 10437 | Tool Room Lathe 8in. to 14in. swing |
| — |
Hardinge |
VBS |
Fair |
1795.00 |
Photo /
More Info. |
| —: Collets, collet closure, toolpost, turret |
|
| Ad # 10335 | Tool Room Lathe 8in. to 14in. swing |
| 1940s |
atlas |
102.07403 |
Very Good |
1250.00 |
No Photo /
More Info. |
| idk: 12" atlas lathe. |
|
| Ad # 10325 | Tool Room Lathe 8in. to 14in. swing |
| '80s |
Grizzley |
1440 |
Good |
2750.00 |
Photo /
More Info. |
| 1440: 14" swing over bed, 17/8" hole in spindle 8" crosslide travel |
|
| Ad # 10090 | Tool Room Lathe 8in. to 14in. swing |
| — |
H.Ernault-Somua |
type 230 |
Excellent |
3,450.00 |
Photo /
More Info. |
| —: 50-2500 rpm
6"swing over cross
10"overr ways
spindle bore 1-1/4"
taper attach.
tool post
3 jaw 5" chuck
coolant
inch metric thrds
foot brake
|
|
| Ad # 9593 | Tool Room Lathe 8in. to 14in. swing |
| 1953 |
leblond |
regal |
Good |
2495.00 |
Photo /
More Info. |
| 17 swing x 30centers: 4 chucks 6 to 14" 3 and 4 jaw with backplates
steady rest
does threads
no gap
variable speed retrofited
rocher type toolpost
|
|
| Ad # 9509 | Tool Room Lathe 8in. to 14in. swing |
| — |
Republic |
16S |
Good |
3,580.00 |
Photo /
More Info. |
| 8" chuck, approximate 40" between centers: 8" chuck, 40" between centers approximate. |
|
| Ad # 9317 | Tool Room Lathe 8in. to 14in. swing |
| 1980 |
Logan |
2555VLH |
Good |
2250.00 Reduced |
Photo /
More Info. |
| 10" swing over bed / 18" between centers: Has 8" 3jaw chuck/ 2 tool holders/ V/S Spindle Drive 55/2000 RPM. |
|
| Ad # 9191 | Tool Room Lathe 8in. to 14in. swing |
| 1972? |
LeBlond |
Regal |
Very Good |
5950.00 REDUCED |
Photo /
More Info. |
| 14" Swing over bed, 10" over crosslide: Tool room lathe, nice,14" Swing over bed, 10" over crosslide, 30" between c... |
|
| Ad # 8802 | Tool Room Lathe 8in. to 14in. swing |
| ?? |
Pratt & Whitney |
12 x 30 |
Good |
1,995.00 |
Photo /
More Info. |
| 12 swing x 30 centers: 12 " swing over ways, 8" over cross slide
1-1/4" spindle bore
8" 3 & 4 jaw chucks
steady rest
taper attachment
no toolpost
inch threading
collet wheel system-2J
3 HP
18-525 RPM |
|
| Ad # 8635 | Tool Room Lathe 8in. to 14in. swing |
| — |
leblond |
— |
Good |
6250.00 |
Photo /
More Info. |
| —:
8" 3jaw chuck
10' aol
lenght work area 7ft.
spindle bore 1.5 inches..
swing over ways ??"...
swing over cross slide 13"
|
|
| Ad # 8425 | Tool Room Lathe 8in. to 14in. swing |
| — |
SOUTHBEND |
CL-1307 |
Good |
12,500 |
Photo /
More Info. |
| USED 13in x 20in SOUTHBEND ENGINE LATHE: Serial Number: 72 SP 132
MAXIMUM SWING OVER BED: 13"
MAXIMUM SWING OVER CROSS SLIDE: 7"
DISTANCE BETWEEN CENTERS: 20"
SPINDLE SPEEDS: VARIABLE TO 4,000 RPM
SPINDLE HOLE: 1-3/8"
SPINDLE NOSE: D-1-3" CAMLOCK
THREADS: (96) 2-1/2 TO 152 TPI
FEEDS: (96) .0005" TO .0307"
CROSS SLIDE TRAVEL: 7"
TOP SLIDE TRAVEL: 2-5/8"
TAILSTOCK SPINDLE TRAVEL: 4"
TAILSTOCK SPINDEL DIAMETER: 1-5/8"
MOTOR: 5 HP
EQUIPPED WITH:
TAPER ATTACHMENT
COLLET CHUCK
STEADY REST
HARD BED WYAS
CHUCK GUARD
TAILSTOCK
CHIP PAN BED
|
|
| Ad # 8091 | Tool Room Lathe 8in. to 14in. swing |
| 1966?? |
Monarch |
12 ck |
Good |
1,350.00 |
Photo /
More Info. |
| 14" x 30", Monarch Manual Lathe: Includes 8" 3 jaw chuck, D1-6 mount, taper attachment. No tooling. Old but ... |
|
| Ad # 7124 | Tool Room Lathe 8in. to 14in. swing |
| — |
Hendy |
12x30 |
Good |
2,495.00 reduced |
Photo /
More Info. |
| 12" x 30" Precision Engine Lathe With Taper Attachment : Swing: 12"
DBC: 30"
Includes:
QC Tool Post
10" 3-Jaw Chuck
Taper Attachment
TravaDial in Z
Collant System
Inch Threading |
|
| Ad # 7091 | Tool Room Lathe 8in. to 14in. swing |
| ? |
Christian |
11" x 24" |
Good |
call |
Photo /
More Info. |
| 11" x 24" Swiss Built Tool Room Lathe: Swiss Made - metric only!
Swing: 11"
DBC: 24"
Spindle Bore: 1.00"
Chuck: 6"
Tailstock
NOTE: Machine is 380v/3-phase but has a 220v/3-phase transformer attached. |
|
| Ad # 5783 | Tool Room Lathe 8in. to 14in. swing |
| — |
Hardinge |
Model HC |
Excellent |
3,990.00 reduced |
Photo /
More Info. |
| Hardinge Turret Lathe: Hardinge Turret Lathe
5C collet
Super-Precision / Model HC
Very clean and well maintained. |
|
| Ad # 5671 | Tool Room Lathe 8in. to 14in. swing |
| — |
Okuma |
LK |
Excellent |
6,950 |
Photo /
More Info. |
| Okuma 14" x 32" Gap Bed Engine Lathe: SWING OVER WAYS .................... 14΄΄
SWING OVER CROSS SLIDE ............ 7-1/2΄΄
SWING IN GAP ....................... 16-1/2΄΄
DISTANCE BETWEEN CENTERS ........... 32΄΄
SPINDLE SPEEDS .............. (12) 50 TO 2000 RPM
LONGITUDINAL FEEDS ...... (32) .0018 TO .0276 IPR
CROSS FEEDS ............. (32) .0009 TO .0134 IPR
INCH THREADS ....................... 4 TO 56 TPI
METRIC THREADS ................. .5 TO 7 MM PITCH
DIAMETER OF 3-JAW CHUCK ............ 10΄΄
DIAMETER OF SPINDLE HOLE ........... 1΄΄
CARRIAGE STOP ...................... YES
HARD WAYS .......................... YES
CHIP PAN ........................... YES
SPINDLE MOTOR, HORSEPOWER .......... 5
EQUIPPED WITH TRU-TRACE SINGLE AXIS HYDRAULIC TRACER:
TRACER SERIAL ...................... 2-1508
TRACER MODEL .......................6107-02
|
|
| Ad # 5215 | Tool Room Lathe 8in. to 14in. swing |
| 1981 |
HARDINGE |
HLVH |
Very Good |
12,500 |
Photo /
More Info. |
| 11"x 18" HARDINGE HLVH Precision Toolroom Lathe, S/N-HLV-H-8895-T, Use: Specifications:
Swing over Bed 11"
Swing over Cross-Slide 6"
Distance between Centers 18"
Spindle Speeds Variable 125 to 3000 RPM
Spindle Mount Hardinge Taper & 5C
Spindle Bore 1" Through Collet Tube
Feeds(Range) (Variable DC Motor) 5/16 to 7 IPM
Threads(Range) in Gearbox (27) 11 to 108 TPI
Tailstock Taper #2 Morse
Tailstock Quill Travel 3-3/4"
Overall Dimensions 34" x 70" x 58" Ht
Accessories Collet Closer, Micrometer Carriage Stop
|
|
| Ad # 4760 | Tool Room Lathe 8in. to 14in. swing |
| 1961-8 |
DAINICHI |
1928 |
Good |
12,500 |
Photo /
More Info. |
| DANICHI MACHINE: MANUAL VERTICAL MOVEMENT OF TABLE SHALL BE DONE WHILE THE FEED SYSTEM IS RO... |
|
| Ad # 4503 | Tool Room Lathe 8in. to 14in. swing |
| — |
Hardinge |
DSM59 |
Good |
5900.00 |
Photo /
More Info. |
| Hardinge Lathe: With Bar Feeder |
|
| Ad # 4424 | Tool Room Lathe 8in. to 14in. swing |
| 80's |
Hardinge |
HC |
Excellent |
6,950.00 |
Photo /
More Info. |
| Super Precision Hardinge HC Chucker: Automatic Threading attachment.
Includes lots of misc. tooling |
|
| Ad # 8068 | Tool Room Lathe 8in. to 14in. swing |
| 2003 |
BIRMINGHAM |
YCL-1340GH |
Excellent |
Sold |
Photo /
More Info. |
| 13" x 40" Gear Head Bench Lathe with Stand, Single Phase: Swing Over Bed: 13"
Swing Over Cross Slide: 8"
Swing Over Gap Bed: 18-3/4"
Width Of Gap: 7-7/8"
Distance Between centers: 40"
Hole Through Spindle: 1-3/8"
Spindle Taper: D1-4
Spindle Speeds: 70 - 2,000 ppm
2 HP motor
8 speeds 70-2000
5C collet closer setup included
QC toolpost W/ 5 holders |
|
| Ad # 1581 | Tool Room Lathe 8in. to 14in. swing |
| 1976 |
Hardinge |
HC High Speed Precision |
Good |
Sold |
Photo /
More Info. |
| Hardinge High Speed/High Precision Compact Lathe: Precision chuck
Threading
Approx 50 pieces of tooling including collets |
|
| Ad # 1577 | Tool Room Lathe 8in. to 14in. swing |
| 1952 |
Shelton |
10" x 48" |
Good |
Sold |
Photo /
More Info. |
| 10" x 48" Shelton Engine Lathe: Swing: 10"
DBC: 48"
Misc Tooling including Chuck |
|
| Ad # 9823 | Tool Room Lathe 8in. to 14in. swing |
| — |
HARRISON |
10AA |
— |
Sold |
Photo /
More Info. |
| 10 X 20" HARRISON 10 AA LATHE: 10 x 20" centers
IN EXCELLENT SHAPE 3 JAW CHUCK TAPER ATTACHMENT CENTERS AND TOOL HOLDER |
|
| Ad # 9819 | Tool Room Lathe 8in. to 14in. swing |
| — |
— |
— |
— |
Sold |
Photo /
More Info. |
| 13 X 30" LEBLOND REGAL: 13 x 30"
IN EXCELLENT SHAPE WITH 3 JAW CHUCK TOOL HOLDER |
|
| Ad # 1518 | Tool Room Lathe 8in. to 14in. swing |
| unknown |
Hendley |
— |
Fair |
Sold |
Photo /
More Info. |
| Hendley 10" Lathe: Swing: 10"
Distance Between Centers: 30" |
|
| Ad # 9014 | Tool Room Lathe 8in. to 14in. swing |
| — |
— |
Regal |
— |
Sold |
No Photo /
More Info. |
| —: LEBLOND 19 X 60 " LATHE
|
|
| Ad # 9013 | Tool Room Lathe 8in. to 14in. swing |
| — |
Monarch |
10EE |
— |
Sold |
No Photo /
More Info. |
| 10": MONARCH 10 EE LATHE |
|
| Ad # 9787 | Tool Room Lathe 8in. to 14in. swing |
| 1996 |
bridgeport |
romi |
Excellent |
Sold |
Photo /
More Info. |
| 14 x 40: 14 x 40 |
|
| Ad # 9012 | Tool Room Lathe 8in. to 14in. swing |
| — |
Leblond |
13 x 32 |
— |
Sold |
Photo /
More Info. |
| 13 X 32" LEBLOND: 13 X 32 |
|
| Ad # 3459 | Tool Room Lathe 8in. to 14in. swing |
| 70's? |
Rockwell |
14" swing x 42"centers |
Good |
Sold |
Photo /
More Info. |
| Small toolroom /home shop lathe: 14" swing over ways x 42" center distance
taper attachment
40-160RPM
steady rest
8" 3-jaw chuck,LO type
6" 4-jaw chuck
1.5" spindle bore
inch threads
live center |
|
| Ad # 5216 | Tool Room Lathe 8in. to 14in. swing |
| 1986 |
HARDINGE |
HLVH |
Excellent |
Sold |
Photo /
More Info. |
| 11"x 18" HARDINGE HLVH Precision Toolroom Lathe, S/N-HLVH-12427-T, Use: Specifications:
Swing over Bed 11"
Swing over Cross-Slide 6"
Distance between Centers 18"
Spindle Speeds Variable 125 to 3000 RPM
Spindle Mount Hardinge Taper & 5C
Spindle Bore 1" Through Collet Tube
Feeds(Range) (Variable DC Motor) 5/16 to 7 IPM
Threads(Range) in Gearbox (27) 11 to 108 TPI
Tailstock Taper #2 Morse
Tailstock Quill Travel 3-3/4"
Overall Dimensions 34" x 70" x 67" Ht
Accessories Collet Closer, 3 Jaw Chuck, 4 Jaw Chuck, Toolpost, Collets
|
|
| Ad # 7799 | Tool Room Lathe 8in. to 14in. swing |
| 2006 |
JET |
GH-1440ZX |
Excellent |
Sold |
Photo /
More Info. |
| 14" x 40" Gap Bed Precision Lathe with 3-1/8" Spindle Bore: Distance Between Centers: 40"
Swing Over Bed: 14"
Swing Over Cross Slide: 7-5/8"
Swing Over Gap (Bed Removed): 23-5/8"
Length Through Gap: 12-1/4"
Spindle Bore: 3-1/8"
Spindle Mount: D1-8
Spindle Speed Range: 42" - 1,800 rpm in 12 Stages
Spindle Drive: Gear Driven
Tailstock
Quick Change Tool Post
|
|
| Ad # 4960 | Tool Room Lathe 8in. to 14in. swing |
| 90's? |
JET |
VD-920N/321373 |
Excellent |
SOLD |
Photo /
More Info. |
| 9" swing x 22" centers; Single Phase Lathe: Chuck Diam: 4" with reversable Jaws & spare set
Swing Over Bed: 9"
Swing Over crosslide: 5"
Distance Between Centers: 22"
Spindle Speeds: 130 - 2,000 rpm
Spindle Bore: 3/4"
Inch/Metric Threading
4-Way Tool Post
Spindle Forward/Reverse Switch
Includes:
7 1/2" 4 Jaw Chuck
Steady Rest
Follow Rest
Face Plate-10"
Tailstock-2MT
Drill Chuck-1/2"cap
Set of Change Gears
All Manuals |
|
| Ad # 7668 | Tool Room Lathe 8in. to 14in. swing |
| — |
Nardini |
MS 1440E |
Good |
Sold |
Photo /
More Info. |
| 14" x 40" Nardini Mascote MS-1440E High Precision Lathe : Swing: 14 "
Centers: 40 "
Spindle Bore: 1.875 "
Power: 6.75 HP
Swing Over Cross Slide: 8 "
Description: 14in. Swing over bed
21in. Swing thru gap
8in. Swing over cross slide
40in. Between centers
18 Spindle speeds 31.5 - 2500 RPM
Inch and MM Threading
1-7/8in. Spindle bore
D-5 Spindle taper
#3 Morse taper tailstock
|
|
| Ad # 8437 | Tool Room Lathe 8in. to 14in. swing |
| 1986 |
JH |
JH 1337 |
Very Good |
Sold |
Photo /
More Info. |
| 13 x 37 Gap Bed Lathe: Swing Over Bed: 13"
Gap Bed Length: 8"
Distance Between Centers: 37"
Spindle Bore: 1-3/4"
Inch/Metric Threading
Aloris Quick Change Tool Post |
|
| Ad # 5941 | Tool Room Lathe 8in. to 14in. swing |
| 1969 |
TAKISAWA |
TSL-800 |
Very Good |
Sold |
Photo /
More Info. |
| 14" x 32"cc TAKISAWA Engine Lathe: 14" x 32"cc TAKISAWA Engine Lathe, Model TSL-800
Maximum swing over bed 14 1/4"
Maximum swing over cross slide 8 1/2"
Bed width 10 3/8"
Spindle bore 1 7/16"
Spindle nose L-O tapered key
Tailstock spindle diameter 2"
Tailstock taper No. 3 M.T.
6 Spindle speeds 70-1500 RPM
Longitudinal feeds .002-.142 IPR
Thread range
Inch 2-56 T.P.I.
Metric .5-9mm.
EQUIPPED WITH:
Induction hardened bed ways
Swivel compound
Inch/Metric threading with (12) change gears
Foot brake
Thread dial
Micrometer carriage stop
10" diameter 4-jaw chuck
7" diameter 3-jaw universal chuck with (2) sets of jaws
3" diameter capacity 3-point plain steady rest
Plain follow rest
KDR quick change toolpost with (5) toolblocks
Headstock spindle adapter
Live center
Drill chuck with adapter
Work light
Rear splash guard
5 H.P. 3/60/220 volt motor with controls
|
|
| Ad # 5936 | Tool Room Lathe 8in. to 14in. swing |
| — |
SOUTHBEND |
444Z |
Good |
Sold |
Photo /
More Info. |
| 9" x 22"cc SOUTHBEND model A bench lathe with table: 9" x 22"cc SOUTHBEND model A bench lathe with table, bed length 3 1/2'
Collet capacity 1/2"
Max. swing over bed 9 1/4"
Max. swing over cross slide 5 1/2"
Hole through spindle 3/4"
Cross slide travel 5 7/8"
Compound rest top slide travel 2 1/4"
Tailstock spindle taper No. 2 M.T.
Tailstock spindle travel 2 1/8"
6 Spindle speeds 41-658 RPM
Longitudinal feeds .0015-.0853 IPR
Cross feeds .0004-.0252 IPR
Thread range 4-224 T.P.I.
EQUIPPED WITH:
Steel table mount
Swivel compound
Power longitudinal and cross feeds
Threading with thread dial
5 dia. 3-jaw universal chuck
3-point plain steady rest
Plain toolpost
(3) drill chucks
Live center
½ H.P. 3/60/220-440 volt motor with reversing control
Wired for 3/60/440 volt operation
|
|
| Ad # 5937 | Tool Room Lathe 8in. to 14in. swing |
| 1965 |
SOUTHBEND |
Catalogue #CL187RB |
Good |
SOLD |
Photo /
More Info. |
| 10" x 34"cc SOUTHBEND Engine Lathe with metal cabinet base: 10" x 34"cc SOUTHBEND Engine Lathe with metal cabinet base, catalogue #CL18... |
|
| Ad # 5935 | Tool Room Lathe 8in. to 14in. swing |
| — |
SOUTHBEND |
444Z |
— |
Sold |
Photo /
More Info. |
| 9" x 22"cc SOUTHBEND Model A Bench lathe with table: 9" x 22" cc SOUTHBEND Model A Bench lathe with table, Bed length 3 1/2'
Collet capacity 1/2"
Max. swing over bed 9 1/4"
Max. swing over cross slide 5 1/2"
Hole through spindle 3/4"
Cross slide travel 5 7/8"
Compound rest top slide travel 2 1/4"
Tailstock spindle taper No. 2 M.T.
Tailstock spindle travel 2 1/8"
6 Spindle speeds 41-658 RPM
Longitudinal feeds .0015-.0853 IPR
Cross feeds .0004-.0252 IPR
Thread range 4-224 T.P.I.
EQUIPPED WITH:
Steel table mount
Swivel compound
Power longitudinal and cross feeds
Threading with thread dial
5" dia. 3-jaw universal chuck with (2) sets of jaws
3-point plain steady rest
Plain toolpost
Drill chuck
Live center
Dead center
Carriage stop
1 H.P. 3/60/220-440 volt motor with reversing control
Wired for 3/60/440 volt operation
|
|
| Ad # 5940 | Tool Room Lathe 8in. to 14in. swing |
| 1961 |
LEBLOND REGAL |
— |
Good |
Sold |
Photo /
More Info. |
| 13 x 42cc LEBLOND REGAL Engine Lathe: 13 x 42cc LEBLOND REGAL Engine Lathe
Max. swing over bed and carriage wings 14
Max. swing over compound rest 8
Bed width 12 3/16
Spindle bore 1 13/32
Spindle nose L00 tapered key
Cross slide travel 8 7/8
Compound rest travel 3 7/8
Center size No. 3 M.T.
Tailstock spindle diameter 1 5/16
Tailstock spindle travel 5
12 Spindle speeds 45-1800 RPM
48 Feeds .0018-.106 IPR
Thread range 4-224 T.P.I.
EQUIPPED WITH:
Hardened replaceable bed ways
Swivel compound
12Dia. face plate
4-jaw chuck
6-jaw buck chuck
Thread dial
Micrometer carriage stop
Turret type carriage longitudinal stop
3-point plain Steady rest
Hand collet closer with nose
Live center
Chip Pan
3 H.P. 3/60/220-440 Volt Motor and controls
Wired for 3/60/440 Volt operation
|
|
| Ad # 5955 | Tool Room Lathe 8in. to 14in. swing |
| 1956 |
SOUTHBEND |
Catalogue #CL8-185D |
Good |
Sold |
Photo /
More Info. |
| 14 ½ x 48cc SOUTHBEND Toolroom Lathe, Catalogue #CL8-185D: 14 ½ x 48cc SOUTHBEND Toolroom Lathe, Catalogue #CL8-185D
Max. swing over bed 14 5/8
Max. swing over cross slide 8 15/16
Capacity thru spindle 1 3/8
Max. collet capacity 1 1/16
Spindle nose D1-4 Camlock
Center size No.3 M.T.
Spindle speeds to 875 RPM
48 longitudinal feeds .0015-.0841 IPR
48 cross feeds .0006-.0315 IPR
Thread range 4-224 T.P.I.
EQUIPPED WITH:
Swivel compound
4-step cone pulley belt drive headstock
D1-4 Camlock Spindle nose
Hand collet tube with nose and (10)
5C collets w/ rack
8 Dia. 3-jaw universal chuck
3 point plain steady rest
Aloris tool post with (3) tool blocks
Drill chuck
Live center
Misc. tooling
2 H.P. AC Motor drive w/ controls
|
|
| Ad # 5938 | Tool Room Lathe 8in. to 14in. swing |
| 1970 |
CLAUSING-COLCHESTER |
— |
Very Good |
Sold |
Photo /
More Info. |
| 13 x 36 cc CLAUSING-COLCHESTER Geared-Head Lathe: 13 x 36 cc CLAUSING-COLCHESTER Geared-Head Lathe
Max. swing over bed 13
Max. swing over saddle wings 12
Max. swing over cross slide 8
Bar capacity thru spindle 1 ½
Spindle bore 1 9/16
Spindle nose L-O tapered key
Cross slide travel 6 ½
Compound rest travel 3 Ύ
Tailstock spindle diameter 1 11/16
Tailstock spindle travel 4 Ό
Center in tailstock No.3 M.T.
Bed width 8 1/2
16 spindle speeds 40-1800 RPM
45 longitudinal feeds .0025-.068 IPR
45 cross feeds .0012-.034 IPR
Thread range 4-112 T.P.I
EQUIPPED WITH:
Geared head
Flame hardened bed-ways
Swivel compound
Thread indicator
Micrometer carriage stop
12 Dia. faceplate
9 Dia. 4-jaw chuck
6 Dia. 3- jaw universal chuck with
(4) sets of soft jaws
L-o back plate
Hand collet closer with nose (for 5C collets)
2-point plain follow rest
Drill chuck with adapter
Dead center
Headstock sleeve adapter with dead center
Boring bar
Steel cabinet base
Chip pan with splash guards
3/1 ½ H.P. 2-speed, 3/60/220 volt
motor with controls
|
|
| Ad # 5924 | Tool Room Lathe 8in. to 14in. swing |
| — |
SMC |
BV18VS |
New |
Sold |
Photo /
More Info. |
| 6" x 14" Single Phase SMC BV18VS Bench type lathe: 6" x 14" cc SMC BV18VS Bench type lathe,
New, never used
Maximum swing over bed ways 6 7/8"
Maximum swing over cross slide 4 1/2"
Maximum length between centers 14"
Spindle bore 13/16"
2-ranges of spindle speeds
EQUIPPED WITH:
Induction hardened bed ways
3" diameter 3-jaw universal chuck
Built-in 4-way square toolpost
Plastic chip guard
Power feeds
Variable speed drive
1/60/110 volt electric
|
|
| Ad # 5926 | Tool Room Lathe 8in. to 14in. swing |
| 1994 |
ROYAL |
#1340GHE |
Very Good |
Sold |
Photo /
More Info. |
| 13/18 3/4 x 38cc ROYAL Precision High Speed Removable Gap Bed Lathe: 13/18 3/4 x 38cc ROYAL Precision High Speed Removable Gap Bed Lathe
Max. swing over bed 13
Max. swing through gap 18 3/4
Length of gap in front of spindle nose 6
Max. swing over cross slide 7 1/2
Spindle bore 1 1/2
Spindle nose D1-4 Camlock
Tailstock quill diameter 1 5/8
Size of center in tailstock No. 3 M.T.
(8) spindle speeds 70-2000 RPM
Longitudinal feeds 0.0020-0.0273 IPR
Cross feeds 0.0006-0.0094 IPR
Thread range:
Inch 4-56 T.P.I.
Metric 0.4-7 mm.
EQUIPPED WITH:
Hardened bed ways
Removable gap bed
Swivel compound
Camlock spindle nose
5C hand collet closer with nose
6 dia. 3-jaw universal chuck
Micrometer carriage stop
(4) change gears
Inch/metric threading
3-point plain steady rest
2-point plain follow rest
Thread dial
Foot brake
Work light
Splash guard, pan bed and coolant pump
3 H.P. 3/60/220-440 volt motor with controls
Wired for 3/60/220 volt operation
|
|
| Ad # 9278 | Tool Room Lathe 8in. to 14in. swing |
| — |
Okuma |
LK |
Very Good |
Sold |
Photo /
More Info. |
| Collet Lathe -350mm x 800mm-14"x 30": 350mm (14")swing over ways x 800mm (30")centers
Lever style collet closer
QC toolpost
travel dial on bed
inch/metric threads
amp meter on headstock
Specs
12" swing over ways , 7-3/4" over cross slide
30" centers
Spindle Nose: A-1 verify?? |
|
| Ad # 2601 | Tool Room Lathe 8in. to 14in. swing |
| 80's |
Clausing |
14" x 40" |
Good |
Sold |
Photo /
More Info. |
| Quality gear head lathe: 14" swing x 40" centers
10" 3-jaw chuck
1.5" spindle bore
misc tooling |
|
| Ad # 7205 | Tool Room Lathe 8in. to 14in. swing |
| 1965 |
MONARCH |
EE |
Very Good |
Sold |
Photo /
More Info. |
| 10 x 20cc MONARCH EE Precision toolmakers Lathe: 10 x 20cc MONARCH EE Precision toolmakers Lathe
Max. swing over bed 12 1/2
Max. swing over cross slide 7 Ό
Max. distance between centers 20
Hole through spindle 1 13/32
Spindle nose D-1-3 Camlock
Bed width 10 ½
Compound rest top slide travel 2
Tailstock Spindle diameter 1 Ύ
Tailstock Spindle traverse 3 ½
Variable Spindle speed range 8 to 4000 RPM
50 feeds .005-.016 IPR
Thread range 3-184 T.P.I.
EQUIPPED WITH:
Induction hardened bed-ways
Swivel compound
D-1-3 Camlock Spindle nose
6Dia. 3-jaw chuck
Hand collet closer with collet nose
JACOBS collet chuck
Taper turning attachment
Square Toolpost
Pan bed
5 H.P. with new AC inverter drive and controls |
|
| Ad # 1723 | Tool Room Lathe 8in. to 14in. swing |
| — |
Bradford |
10" swing x 60"centers |
Good |
Sold |
Photo /
More Info. |
| 10" x 60" Engine Lathe-single phase 220/1: steady rest
toolpost grinder
3-jaw chuck 12"
single phase converter included |
|
| Ad # 7171 | Tool Room Lathe 8in. to 14in. swing |
| — |
LeBlond |
8 x30 |
Very Good |
Sold |
Photo /
More Info. |
| LeBlond 8-1/2" x 30" Tool Room Lathe : Swing: 8-1/2"
DBC: 30"
Includes a 3-Jaw and a 4-Jaw chuck
Chuck has a "5-C Collet Attachment"
|
|
| Ad # 7154 | Tool Room Lathe 8in. to 14in. swing |
| — |
Clausing |
5914 |
Good |
SOLD |
Photo /
More Info. |
| 13" x 48" Clausing Tool Room Lathe : Swing: 13"
DBC: 48"
Spindle Speeds: Variable in 2-Stages from 20 - 2,000 rpm
Includes:
8" 4-Jaw Chuck
Taper Attachment Type 7114
Steady Rest: (0-4"?)
Tool Post
3 Tool Holders |
|
| Ad # 9108 | Tool Room Lathe 8in. to 14in. swing |
| 2008 |
Victor |
1440B |
Demo Machine |
Sold |
Photo /
More Info. |
| 14 in swing x 40 in centers: Standard Equipment
6" 3-jaw chuck
Steady/follow rest
face plate
halogen work light
8" 4-jaw chuck
4-way toolpost
full length splash guard
Quick Change toolpost W/ 5 holders set
A little tooling included
Features:
Powerful 3HP single speed motor gives full power over all 12 speeds!
High speeds 40-2,000RPM(12)speed ranges
D1-4 Camlock spindle
jog button for easy gear changes
Quick change-english/metric gear box
safety clutch for feed rod
full length foot brake
coolant pump
Weight-1,936Lbs
Specifications Victor- 1440B
Spindle bore 1.5"
Swing over bed 14"
Swing over gap 20"
Between centers 39.5"
Spindle RPM 40-2,000(12)steps
Spindle nose D1-4
Horsepower 3HP
Swing over cross slide 8-5/8"
Threads Metric0.4-7.0mm x 32 kinds English 4-56TPI
Bed width 8"
crosslide travel 7"
Coumpound travel 4"
Tailstock Quill #3MT
|
|
| Ad # 7093 | Tool Room Lathe 8in. to 14in. swing |
| 90 'S ?? |
Nardini |
TT1030E |
Good |
Sold |
Photo /
More Info. |
| 12" Swing x 30" centers-Manual Lathe: 12" swing over ways, 6" over crosslide
30-35" center distance
6" 3-jaw chuck(D1-4)
collet closer -lever type
DRO-2 axis Mitsutoyo
no gap in bed
inch/metric threads
1" spindle bore
taper attachment
Toolpost????
3 HP |
|
