Manual Lathes

Year	Make	Model	Condition	Price	Details

Ad # 5124		Second Operation		Ad to Checklist
1979 ??	Hardinge	VBS	Good	Sold	Photo / More Info.
Precision Hardinge Tool Room/Second Op. VBS Lathe: Spindle Speed: 150 - 3,500 rpm Collet Closer Collet Chuck machine was refurbished, runs great no issues

Ad # 7519		Second Operation		Ad to Checklist
1994	COSEN	LHT-25B	Very Good	2,650.00	Photo / More Info.
High Speed Second Operation Turret Lathe (Hardinge Copy): Turret: 6 position Turret Tool Holders: 19 mm (3/4") Spindle Bore: 30 mm (1-1/16") Spindle Power: 2 hp Spindle Speed: 460-780-1,290-1,850 rpm Chuck: 5-C Collet Chuck with collet closer Bed Width: 120 mm (4-3/4") Bed Length: 725 mm (32-3/8") Height from Center of Lateral Cutter: 130 mm (5-1/8") Travel of Lateral Cutter: 130 mm (5-1/8") Scroll Chuck Capacity: (NOT included) 125 mm (5") Collet Chuck Capacity: Round Bar: 5 - 25 mm (3/16" - 1") Hexagon Bar: 7 - 22 mm (1/4" - 13/16") Square Bar: 7 - 18 mm (1/4" - 13/16") Threading Capacity: For Brass: 20 mm (3/4") For Steel: 12 mm (1/2")

Ad # 5203		Second Operation		Ad to Checklist
1960	HARDINGE	DSM 59	Good	3,950	Photo / More Info.
HARDINGE DSM 59 Second Operation Lathe, S/N-DV59-6975-3: Specifications: Swing over Bed 9" Swing over Cross-Slide 4-1/2" Distance Spindle to Turret 3" thru 18" Spindle Bore 1" Thru 5C Collets Spindle Mount 5C Spindle Speeds Variable Cross Slide Feeds Hand Lever Turret Feeds Hand Lever Turret Travel 4" Turret Hole Size Motor(s) 2-Speed 3/4HP Accessories 5C Collet Closer, Lever Cross Slide with Front & Rear Tool Holders, Lever Bed Turret Dimensions 29"x 68"

Ad # 5200		Second Operation		Ad to Checklist
1981	Hardinge	DSM 59	Very Good	7,500	Photo / More Info.
HARDINGE DSM-59 Second Operation Lathe, S/N-DV59-16185 : Specifications: Swing over Bed 9" Swing over Cross-Slide 4-1/2" Distance Spindle to Turret 3" thru 18" Spindle Bore 1" Through 5C Collet Spindle Mount HARDINGE Taper Spindle Speeds Variable 230 - 3500 RPM Carriage Feeds None Turret Feeds Hand Turret Travel 4" Turret Hole Size 5/8" Motor(s) 2 Speed 220V 3Ph 60C Dimensions/Weight 36" x 68" 1000 Lbs. With Lever Cross Slide, Bed Turret, 5C Collet Closer, Coolant

Ad # 5204		Second Operation		Ad to Checklist
1981	HARDINGE	DSM59	Good	7,500	Photo / More Info.
HARDINGE DSM59 Second Operation Lathe, S/N-DV59-16300 : Specifications: Swing over Bed 9" Swing over Cross-Slide 4-1/2" Distance Spindle to Turret 3" thru 18" Spindle Bore 1" Through 5C Collet Spindle Mount HARDINGE Taper Spindle Speeds Variable 230 - 3500 RPM Cross Slide Lever Operated Turret Feeds Hand Turret Travel 4" Motor 2 Speed 220V 3Ph 60C With Lever Cross Slide, Bed Turret, 5C Collet Closer, Coolant

Ad # 5201		Second Operation		Ad to Checklist
1971	HARDINGE	DSM59R	Good	6,950	Photo / More Info.
HARDINGE DSM59R Second-Operation Lathe, S/N-DV59-12029: Swing over Bed 9" Swing over Cross-Slide 4-1/2" Distance Spindle to Turret 3" thru 18" Spindle Bore 1-1/16" Spindle Mount HARDINGE Threaded Spindle Speeds (10) 450 to 4000 RPM Spindle Drive Type Double Belt Pulleys (3 Sets) Turret Feeds Hand Turret Travel 4" Turret Hole Size 5/8" Motor(s) 2 Speed 208-220V 3Ph 60C Dimensions/Weight 29" x 68" 1000 Lbs. Accessories 5C Lever Collet Closer, Lever Cross Slide, Bed Turret

Ad # 2985		Second Operation		Ad to Checklist
1998	Victor	616	Good	6,750.00	Photo / More Info.
Victor Model 616 Second Operation Lathe: Spindle Capacity - 5C Round 1-1/16" Spindle Capacity - 5C Hexagon 7/8" Spindle Capacity - 5C Square 3/4" Spindle Capacity - Step Collet 1-1/16" - 6" Spindle Speed Range, Variable 230 - 3,500 RPM Main Motor 2 / 1 HP, 220 Volt Swing Over Bed 9" Double Tool Cross Slide Travel 3-3/4" Turret Slide Travel 4" ID of Turret Head 5/8" Coolant Tank Cpacity 3 Gallons

Ad # 2822		Second Operation		Ad to Checklist
—	Hardinge	DV 59	Good	1050.00	Photo / More Info.
Hardinge Second Operation Lathe: older mach., runs good,5c closer,compound, 3 jaw chuck, tail stock

Ad # 5202		Second Operation		Ad to Checklist
—	HARDINGE	21 B&S Spindle	Good	Sold	Photo / More Info.
HARDINGE #21 B&S Spindle Second Operation Lathe, S/N-DV59-14160 : Specifications: Swing over Bed 9" Swing over Cross-Slide 4-1/2" Distance Spindle to Tailstock 0" thru 18" Spindle Bore 1.050" Spindle Mount B&S #21 Spindle Speeds 150 - 3500 RPM Spindle Drive Type Variable Tailstock Feeds Lever Tailstock Travel 5.25" Tailstock Hole Size 5/8" Motor(s) 2 Speed 440V 3Ph 60C Dimensions/Weight 27" x 58" 1000 Lbs. Accessories Tool Post, Worklamp

Ad # 8502		Second Operation		Ad to Checklist
—	South Bend	2D W	Good	Sold	Photo / More Info.
8in Chuck South Bend Chucker Lathe with Turret: Swing Over Bed: 16" approx Chuck: 8" 3-Jaw chuck Turret: 6 Position Cross Slide Spindle Bore: 1" Inch Threading

Ad # 5964		Second Operation		Ad to Checklist
1963	HARDINGE	HC	Good	Sold	Photo / More Info.
Model HC HARDINGE Precision Chucker: Model HC HARDINGE Precision Chucker Spindle capacity: with step chucks 1" to 6" with jaw chucks 5" with jaw chucks through spindle 1 5/32" with Round 5C collets 1" with Hex 5C collets 7/8" with square 5C collets 3/4" Spindle nose diameter 2.189" Spindle nose thread 2 3/16"-10 R.H. Maximum fixture diameter 9" Maximum distance from face of turret to spindle 13" Power feeds 1/4 to 10 IPM Spindle speeds 130 to 3000 RPM EQUIPPED WITH: Threaded nose Hardened and ground bedways 8-station turret Steel cabinet Coolant 1.5 H.P. 3/60/220 volt electrics

Ad # 5963		Second Operation		Ad to Checklist
1973	HARDINGE	DSM-59	Excellent	Sold	Photo / More Info.
HARDINGE Precision Second Operation Lathe, Model DSM-59: HARDINGE Precision Second Operation Lathe, Model DSM-59 Spindle capacity with round 5C collets 1-1/16" hexagon 5C collets 7/8" square 5C collets 3/4" step chucks 1-1/16" to 6" jaw chucks 5" jaw chucks through spindle 1-5/32" Spindle nose 2-3/16" R.H. Length of bed 36" Swing over bed 9" Travel of double tool cross slide 3 3/4" Travel of turret slide 4" Diameter of turret holes 5/8" Variable spindle speeds range 230 to 3,500 RPM EQUIPPED WITH: Hexagon turret Double tool cross slide with (3) toolblocks Push button control for variable speed Ball bearing lever collet closer (2) Round type 5C collets (1) Dead center (4) Drill chucks Work light Self-contained coolant system 3/4 - 3/8 H.P. 3/60/220 volt 2-speed main drive motor and electrical controls

Ad # 5965		Second Operation		Ad to Checklist
—	RIVETT	918	Good	sold	Photo / More Info.
RIVETT Model 918 Hand Screw Machine: Model 918 RIVETT Hand Screw Machine Swing over bed 9" Distance between spindle and turret face 13 1/2" Collet capacity 1" Step chuck capacity 6" Jaw chuck capacity 6" Spindle capacity 1 1/2" Travel of turret slide 4 1/2" Swing over slide 4 1/2" Spindle speed range 150-3750 RPM EQUIPPED WITH: Hand collet closer with collet nose Straight turning slide Hexagon bed turret Steel cabinet AC electrics

Ad # 9937		Second Operation		Ad to Checklist
1990'S?	Hardinge	DV-59/DSM-59	Excellent	sold	Photo / More Info.
Hardinge DV-59 Second op turret Lathe 9" swing x 18" centers: collet closer system 6" 3 jaw chuck coolant sys. Indexer unit Lots of holders & Tooling included !!! Std Specs below-please verify SPECIFICATIONS: SPINDLE CAP. w/ROUND 5C COLLETS ...... 1-1/16" HEXAGON 5C COLLETS .... 7/8" SQUARE 5C COLLETS ..... 3/4" STEP CHUCKS ........... 1-1/16" TO 6" JAW CHUCKS ............ 5" JAW CHUCKS THROUGH SPINDLE 1-5/32" SPINDLE TAPER ........................ HARDINGE SWING OVER BED ....................... 9" DISTANCE BETWEEN CENTERS ............. 17" TRAVEL OF TOP SLIDE .................. 4-1/4" TRAVEL OF BOTTOM SLIDE ............... 5" TRAVEL OF TAILSTOCK SPINDLE .......... 3-1/2" TAILSTOCK SPINDLE TAPER .............. #3MT VARIABLE SPINDLE SPEED RANGE ......... 230 TO 3500 RPM APPROX. WEIGHT ....................... 1,150 LBS. -PUSH BUTTON CONTROL FOR VARIABLE SPEED -BALL BEARING LEVER TYPE 5C COLLET CLOSER -ASSORTED 5C COLLETS (SEE PHOTOS) -3/60/230 VOLT TWO-SPEED DRIVE MOTOR & ELECTRICAL CONTROLS

Processing Time: 4 wallclock secs ( 0.08 usr + 0.00 sys = 0.08 CPU)

Website Hosting & Development by IndSite.