| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10521 | Ram Type & Saddle Type Turret Lathes |
| 1993 ?? |
Jet |
TL-25 |
Good |
3,995.00 |
Photo /
More Info. |
| Hardinge style turret lathe: 6" swing over cross slide
6 station turret on ram
8 ft bar feed-not shown
1" spindle bore
5C collet system
some tooling shown
cut off attachment
coolant
made in taiwan
2 HP |
|
| Ad # 10439 | Ram Type & Saddle Type Turret Lathes |
| — |
Gisholt |
5 |
Good |
2,950.00 |
Photo /
More Info. |
| —: — |
|
| Ad # 10411 | Ram Type & Saddle Type Turret Lathes |
| — |
feeler |
fsm-59 |
Good |
2750.00 |
Photo /
More Info. |
| hardinge style turret lathe: — |
|
| Ad # 9768 | Ram Type & Saddle Type Turret Lathes |
| 1982 |
Shibaura |
S-2040 |
Very Good |
250,000 |
Photo /
More Info. |
| table 2000mm Max swing4000: Shibura single column ram type vertical lathe
YOP 1982
Table 2000
Max swing 4000
Height 1600
DRO 2axes
Under power
|
|
| Ad # 9216 | Ram Type & Saddle Type Turret Lathes |
| — |
Warner |
1SC |
Fair |
make offer |
Photo /
More Info. |
| Trret Lathe 12 in chuck: 84-2000 rpm
5330 control
12 station turret
2-3/8 Dia bar feeder capacity
|
|
| Ad # 9197 | Ram Type & Saddle Type Turret Lathes |
| — |
Warner & Swasey |
#3 |
Very Good |
2295.00 REDUCED |
Photo /
More Info. |
| 67-1480RPM: Barfeed, includes some collets up to 1&1/2", Operation and maint. manual. |
|
| Ad # 9146 | Ram Type & Saddle Type Turret Lathes |
| ? |
Warner and Swasey |
#3 w/barfeed |
Good |
2,485.00 REDUCED |
Photo /
More Info. |
| # 3 w/ bar feed: With Barfeeder, oversized spindle bore (approximate 2")and chuck, uses #4 c... |
|
| Ad # 8524 | Ram Type & Saddle Type Turret Lathes |
| — |
Jones & lamson/J& L |
# 5 |
Very Good |
2,950.00 reduced |
Photo /
More Info. |
| # 5 ---12in swing x 24 centers: 12" swing, 24" centers
2-1/2" spindle bore
12" 3 jaw chuck
ram type
misc tooling included |
|
| Ad # 8525 | Ram Type & Saddle Type Turret Lathes |
| — |
Warner Swasey |
# 2A |
Fair |
2,495.00 reduced |
Photo /
More Info. |
| —: saddle type
15" 3 jaw chuck
3-3/4" spindle bore |
|
| Ad # 7626 | Ram Type & Saddle Type Turret Lathes |
| — |
Morey |
2-C |
Very Good |
995.00 reduced |
Photo /
More Info. |
| Morey 2-C Turret Lathe With Collet Chuck: Collet Chuck with some collets included
This is a very nice (old) machine!! |
|
| Ad # 7622 | Ram Type & Saddle Type Turret Lathes |
| — |
Acme |
# 1 |
Fair |
1,950.00 reduced |
Photo /
More Info. |
| Acme # 1 Turrel Lathe: 12 in 3 jaw chuck |
|
| Ad # 7619 | Ram Type & Saddle Type Turret Lathes |
| — |
Libby |
4-R Chucker |
— |
1950.00 reduced |
Photo /
More Info. |
| Libby 4-R Chucker Lathe: A great general purpose or spares machine
12 inch 3 jaw chuck |
|
| Ad # 7157 | Ram Type & Saddle Type Turret Lathes |
| — |
Jones & Lamson |
# 3 (1-1/2in) |
Good |
1,995.00 OBO |
Photo /
More Info. |
| 1-1/2" Jones & Lamson # 3 Universal Turret Lathe : Spindle Bore: 1-1/2" diameter
Includes:
10" 3-Jaw Chuck
Collet Chuck with lots of Collets
2 x Tool Posts
|
|
| Ad # 6395 | Ram Type & Saddle Type Turret Lathes |
| 1967 |
Herbert |
# 2-D |
Fair |
1,795.00 |
Photo /
More Info. |
| Herbert # 2-D Peg Board Automatic Turret Lathe: Large selection of tooling including collets.
Static Bar Feeder
Parts Catcher
All manuals |
|
| Ad # 5956 | Ram Type & Saddle Type Turret Lathes |
| 1957 |
BARDONS & OLIVER |
No.4 |
Good |
3,950.00 |
Photo /
More Info. |
| No. 4 BARDONS & OLIVER Ram type turret Lathe: No. 4 BARDONS & OLIVER Ram type turret Lathe
Bar capacity 4”
Hole thru spindle 4 ¼”
Max. swing over bed 18 1/8”
Max. swing over carriage guides 16 ½”
Max. swing over cross slide 9 ½”
Max. distance end of spindle to face of turret 32 ½”
Width across bed ways 9”
Hexagon turret travel 12”
Cross slide cross travel 9 ½”
Cross slide carriage longitudinal travel 26”
16 Spindle speeds 31-1550 RPM
12 longitudinal feeds .0025-.050 IPR
12 hexagon turret feeds .0025-.050 IPR
12 cross feeds .0015-.030 IPR
EQUIPPED WITH:
Preselector headstock
Hardened bed ways
Hexagon turret
Front square tool holder
Rear tool holders
Large quantity of collet pads, turret tooling, boring bars
Power operated collet chuck
12” Dia. 4-jaw chuck
Pan bed and coolant
10 H.P. 3/60/220-440 Volt Motor w/ controls
3/60/440 Volt operation
|
|
| Ad # 5957 | Ram Type & Saddle Type Turret Lathes |
| 1971 |
GISHOLT |
No.5-3 |
Very Good |
7,950.00 |
Photo /
More Info. |
| No.5-3 GISHOLT Masterline Ram type turret lathe with SCR drive: No.5-3 GISHOLT Masterline Ram type turret lathe with SCR drive
Swing over bed ways 21 ¾”
Swing over carriage wings 18 ¾”
Swing over cross slide 12 1/8”
Bar capacity 3”
Bed width 12”
Spindle nose A1-8”
Cross slide travel 11 ¾”
Longitudinal travel of cross slide 25 ¾”
(8)Power longitudinal & cross feeds .003-.031 IPR
Hexagon turret turning length 15.62”
Max. distance spindle to turret face 37”
8 power longitudinal feeds of turret .003-.031 IPR
24 Spindle speeds 30-1500 RPM
EQUIPPED WITH:
Hardened bed ways
Curvic couplings on both hexagon & square turrets
Leader type threading with (5) leaders
Square front turret tool post
Hexagon turret
Mimik hydraulic tracer attachment mounted on rear slide
Pneumatic collet chuck with approx. (50) sets of collets
8 ¼” dia. 3-jaw universal chuck
Swing type pendant control
Power assisted turret indexing
Dual feeds on cross slide
(5)short flange type tool holders
(1)long flange type tool holders
(1)live center
(1) drill chuck
Pan bed and coolant
Variable speed drive with up-dated Square D-Altvar
S.S. controls, pendant control mount
3/60/440 volt control voltage
|
|
| Ad # 4691 | Ram Type & Saddle Type Turret Lathes |
| 1954 |
MONARCH |
10" EE |
Very Good |
9500.00 |
Photo /
More Info. |
| 10" EE MONARCH TURRET LATHE: 10" EE MONARCH TURRET LATHE
ACTUAL SWING 12"
DATE BUILT 1954
6 POS TURRET COMPOUND FEEDS .002/.012
CUT OFF AND CROSS SLIDE RPM 1/4000
VARIABLE SPEED
SPRING COLLET
SYSTEM W/COLLETS |
|
| Ad # 4398 | Ram Type & Saddle Type Turret Lathes |
| 1944 |
Monarch |
12"CKK |
Fair |
2750.00 |
Photo /
More Info. |
| Quality built manual lathe14.5" x 30": 14.5" swing over bed
30" between centers
Inch threading
QC toolpost W/ misc holders
1.5" spindle bore
8" 3 Jaw chuck
taper attachment
13-560 RPM |
|
| Ad # 4325 | Ram Type & Saddle Type Turret Lathes |
| 67? |
Gisholt |
2-L/13W-9137 |
Good |
3295.00 reduced |
Photo /
More Info. |
| Heavy Duty Turret Lathe: Swing: 24"
Distance Between centers: 60"
Spindle Bore: 4.25" |
|
| Ad # 4024 | Ram Type & Saddle Type Turret Lathes |
| — |
Warner & Swasey |
Model 1A |
Needs Work |
875.00 obo |
Photo /
More Info. |
| Warner & Swasey Turret Lathe: Swing: 18"
Spindle Bore: 3"
Turret: 6-Station
Comes with some Collets |
|
| Ad # 4013 | Ram Type & Saddle Type Turret Lathes |
| 1941 |
Morey |
Model 2-G |
Fair |
975.00 OBO |
Photo /
More Info. |
| Second Operation Turret Lathe: Swing: 15"
Bed Length: 30"
6-Station Ram-Type Turret
Spindle: 1" Through Bore |
|
| Ad # 2716 | Ram Type & Saddle Type Turret Lathes |
| — |
Bardons & Oliver |
#2 |
Fair |
995.00 |
Photo /
More Info. |
| Bardons & Oliver Manual Turret Lathe: 1" spindle bore
12" centers
4 speed
no tooling included
6 position turret
Belt drive-flat
on a skid |
|
| Ad # 1755 | Ram Type & Saddle Type Turret Lathes |
| — |
Gisholt |
# 3 |
Good |
3,600.00 |
Photo /
More Info. |
| Gisholt # 3 Turret Lathe: Swing: 20"
DBC: 26"
Spindle Bore: 3 1/4"
6 Station Turret
10" 3-Jaw Chuck
|
|
| Ad # 143 | Ram Type & Saddle Type Turret Lathes |
| 1955 |
Gisholt |
Turret Lathe 13W-9136 |
Good |
2,950 |
Photo /
More Info. |
| Large 25" Turret Lathe w/ Tooling: Large 6 station Turret Lathe
Swing 25" over ways
18" chuck-3-jaw w/T-slot
Length 5'from chuck to turret
Misc Tooling
4" spindle bore |
|
| Ad # 4022 | Ram Type & Saddle Type Turret Lathes |
| — |
Libby |
— |
Fair |
Sold |
Photo /
More Info. |
| Libby Turret Lathe: Swing: 24"
Turret: 6 -Stations
Spindle Bore: 3 1/2" |
|
| Ad # 3990 | Ram Type & Saddle Type Turret Lathes |
| ?66 |
Warner & Swasey |
# 3 |
Fair |
Sold |
Photo /
More Info. |
| Heavy Duty W&S # 3 TURRET LATHE: Swing: Approx: 15"
Bed Length: 36"
Cross Slide
Spindle Bore: 1.5"
6-Station Turret |
|
| Ad # 1311 | Ram Type & Saddle Type Turret Lathes |
| ? |
Hitachi Seiki |
5AII |
Fair |
Sold |
Photo /
More Info. |
| Hitachi Seiki Turret Lathe (Made in Japan): Max Swing 20"
Swing Over Slide 14"
Z 24"
Spindle Bore 3"
6 Station tuttet (plumbed for coolant)
|
|
| Ad # 5218 | Ram Type & Saddle Type Turret Lathes |
| 1970 |
WARNER & SWASEY |
M4670 |
Very Good |
Sold |
Photo /
More Info. |
| #5-4 1/2 WARNER & SWASEY M4670 Ram Type Turret Lathe, : Specifications:
Swing over Bed 20"
Swing over Cross-Slide 10-1/4"
Spindle Bore 4-5/8"
Spindle Mount A1-11
Spindle Speeds (Preselect Head) (24) 25 to 1000 RPM
Carriage Feeds (6) .005 to .047 IPR
Cross Feeds (6) .002 to .018 IPR
Turret Feeds (6) .004 to .045 IPR
Motor 20/10HP 440V 3Ph 60C
Weight (Approximate) 10,000 Lbs.
Floor Space (excluding barfeed) 129" x 75" x 60"Ht.
Equipped with Collet Setup, Collet Pads, Hydraulic Barfeed; Square Turret Tool Post, Rear Cutoff Toolpost; Taper Attachment, Leadscrew Threading Attachment and Hydraulic Rapid Traverse on Cross Slide Carriage; Coolant; 2 each Short and Long Flange Tool Holders
|
|
| Ad # 6509 | Ram Type & Saddle Type Turret Lathes |
| — |
Jones & Lamson |
# 5 |
Good |
SOLD |
Photo /
More Info. |
| 10" x 40" Universal Turret Lathe, Model # 5: Swing: 10"
Bed Length: 40"
Includes:
Collet Chuck and set of collets
Bar Feeder |
|
| Ad # 9506 | Ram Type & Saddle Type Turret Lathes |
| — |
WARNER & SWAYSEY |
2A |
Good |
SOLD |
Photo /
More Info. |
| 18" CHUCK: 4" Spindle Hole
Spindle RPM Range 16 to 1117rpm
Square Turret on Cross Slide
18" 4 Jaw Scroll Chuck? (as pictured).
All Tool Holders (as pictured)20/40 hp main motor 220/3/60
|
|
| Ad # 2917 | Ram Type & Saddle Type Turret Lathes |
| 1950's |
J & L |
#5 |
Good |
sold |
Photo /
More Info. |
| J & L Ram Type Turret Lathe: 3" spindle bore
20" swing over ways
12" over cross slide
12"-3 jaw chuck
36" distance between centers
4 way tool post
Miscellaneous tooling and holders |
|
| Ad # 2919 | Ram Type & Saddle Type Turret Lathes |
| 1950's |
J & L |
# 7A |
Good |
Sold |
Photo /
More Info. |
| J & L "Saddle Type" Turret Lathe: 20-1000 rpm
12" swing over cross slide
18" swing over ways
16" - 3 jaw chuck
60" distance between centers
Hydraulic chuck actuator and unit |
|
| Ad # 8434 | Ram Type & Saddle Type Turret Lathes |
| — |
Warner & Swasey |
# 2, 1330 |
Very Good |
Sold |
Photo /
More Info. |
| Warner & Swasey # 2 Turret Lathe: Spindle Speeds 67 to 740. RPM
Swing Over Bed 14" |
|
| Ad # 5958 | Ram Type & Saddle Type Turret Lathes |
| 1957 |
WARNER & SWASEY |
M-3500 |
Good |
SOLD |
Photo /
More Info. |
| #3A WARNER & SWASEY Square Head Saddle Type Turret Lathe, Model M-3500: #3A WARNER & SWASEY Square Head Saddle Type Turret Lathe, Model M-3500
Maximum swing over carriage guard: 23-1/2"
Maximum swing over bed: 24-1/2"
Maximum swing over carriage horn: 18"
Bar capacity - Round: 4-1/2"
Square: 3-3/16"
Hexagon: 3-7/8"
Spindle nose: A-11"
Cross slide specs: Cross travel - 14-3/8"
16-Cross feeds - .0025 to .082 IPR
Longitudinal travel - 51"
16-Longitudinal feeds - .005 to .167 IPR
Hexagon turret specs: Longitudinal travel - 51"
16-Longitudinal feeds - .005 to .167 IPR
Diameter of holes - 5"
Maximum distance, spindle to turret face - 59"
Length turned: 43"
16-Spindle speeds: 12 to 426 RPM
EQUIPPED WITH:
Square, pre-selector headstock
Hardened ways
Square toolpost
Rapid traverse to side carriage
Telescopic way covers
Overhead pilot bar
21" Dia. 3-jaw universal chuck
Chuck guard
(2) 2-Hole vertical slide tools
(1) Multiple boring head with pilot hole
(2) Long flange type toolholders
(1) Short flange type toolholder
(3) Boring tools
Pan bed with splash guard
30 H.P. 3/60/220-440 volt motor with controls
Machine wired for 3/60/440 volt operation
|
|
| Ad # 7618 | Ram Type & Saddle Type Turret Lathes |
| — |
Gisholt |
# 4 |
Fair |
Sold |
Photo /
More Info. |
| Gishold # 4, 2-1/2" Spindle Bore Turret Lathe: Spindle Bore: 2-1/2" diameter
Comes with a barfeeder |
|
| Ad # 8148 | Ram Type & Saddle Type Turret Lathes |
| — |
Warner & Swasey |
4A |
Good |
SOLD |
Photo /
More Info. |
| 28" swing x 50" centers: 28" swing over bed
24" Chuck
50" center dist.
4-212 RPM |
|
