Manual Lathes

Year	Make	Model	Condition	Price	Details

Ad # 8522		Hollow Spindle/Big Bore Engine Lathes		Ad to Checklist
90's	MSC	18-80G	Good	3,950.00 reduced	Photo / More Info.
18 swing x 80 centers: 18" swing over ways, 80" centers 16-1700 rpm 10" 3-jaw chuck 3-1/8" spindle bore gap bed

Ad # 9979		Hollow Spindle/Big Bore Engine Lathes		Ad to Checklist
—	Gisholt	4L	Good	29,995.00	Photo / More Info.
9" spindle hole, 24" chuck: 30 HP 24" 3 jaw chuck 9-1/2" spindle hole A1-20 spindle 32" swing Approx. 22,000 lbs Running on 440 volts. (motor tag says 220 volts, must have a transformer) There is a hydraulic pump that has been replaced but needs to be installed. Located in a CT plant

Ad # 9863		Hollow Spindle/Big Bore Engine Lathes		Ad to Checklist
1993	Hermes	34-200	Fair	29,995.00	Photo / More Info.
34" x 200 inch: 1993 Hermes 34" swing over bed 200" between centers 5-670 RPM max speed 6-1/8" spindle bore 36" dia chuck-4 jaw threading 42" swing in gap x 4" 12" roller type steady rest

Ad # 9852		Hollow Spindle/Big Bore Engine Lathes		Ad to Checklist
2009	Bulin	BULIN.T	New	Call	Photo / More Info.
8" up to 14": MODEL ►BULIN.T14" CAPACITY▼ Centre height mm : 400(500) Distance between centres mm :1500, 2000, 3150,4400, 5000, 6150 Width of bed mm : 540 MAX. SWING Over bed mm : 800(1000) Over cross slide mm : 540(740) In gap mm: 1050(1250) In travelling steady mm : 30 – 200 In fixed steady mm : 30 – 280 In fixed steady mm : 280 – 530 In special pipe fixed steady mm :30 – 350 SPINDLE Spindle nose DIN 55027 mm : Ø 470 Spindle bore mm : Ø 356 Spindle speeds No. : 18 Spindle speed range rpm : 6,3 – 315 Main motor power kW : 15 (18,5 option) THREADS AND FEEDS No. of threads No. : 288 (72 of each type) Range of the metric threads mm: 1 – 240 Range of the inch r/1” : 60 – ¼ Range of the module Module : 0,5 – 120 Range of the DP DP : 120 – ½ No. of longitudinal feeds No. : 72 Range of longitudinal feeds mm/rev : 0,13 – 30,72 No. of transversal feeds No. : 68 Range of transverse feeds mm/min : 0,04 – 9,216 TAILSTOCK Quill diameter mm : 110 Quill taper Morse : MT6 Max. quill travel mm : 280 Available also the models with centre height 500 mm. and 8",10" and 12"

Ad # 6520		Hollow Spindle/Big Bore Engine Lathes		Ad to Checklist
—	LeBlond	24" Hollow Spindle	Good	SOLD	Photo / More Info.
24" x 18' Engine Lathe with 5-3/16" Spinde Bore: Swing: 24" Distance Between Centers: 18' Spindle Bore: 5-3/16" Spindle Speeds: 12 - 292 rpm 20" 4-Jaw Chuck 2 x Steady Rests Taper Attachment

Ad # 8550		Hollow Spindle/Big Bore Engine Lathes		Ad to Checklist
2006	GMC	GT-1860DB	Excellent	Sold	Photo / More Info.
18 swing x 60 centers: Featuring: ISO 9001 certified Large spindle bore 3-1/16” Heavy Duty spindle D1-8 One-piece solid cast iron machine base Heavy Duty guideway width 11 13/16” Heavy Duty main motor 7.5HP 12 spindle speeds from 24-1,600 rpm, speeds: 24/ 32/ 55/ 70 / 95/ 160 / 240/ 320/ 550 / 700 / 950 / 1,600 rpm 40 kinds of inch threads, and 41 kinds of metric threads Threading and feeding rate change without changing gears Automatic kick-out longitudinal carriage stop system Spindle is balanced, hardened and precision ground Spindle is supported at 3-point by high precision bearings All gears and shafts are hardened and precision ground Guideways induction hardened and precision ground Automatic lubrication system in headstock and feed box Standard Accessories: Free Taper turning attachment, , installed 10” 3-jsw chuck with set reversible jaws 12” 4-jaw chuck with set reversible jaws 16” Face plate 10” drive plate 5 1/2” large steady rest 3” follow rest Removeable gap 4-way tools post Foot brake Work light and coolant system Manual Lube pump on apron for all guideways Automatic kick-out longitudinal carriage stop system Full length splash guard (2) dead centers and (1) reducing sleeve Thread chasing dial Tool box Specifications: GT-1860DB GT-1860DB Max. swing over bed 18” Max. length of workpiece 60” Max. swing over cross slide 11-5/16” Max. Swing in gap 25 3/16” Width of Bed 11 13/16” Effective length in gap to spindle 10 ¼” Effective length in gap to chuck jaws 3” Spindle bore 3-1/16” , D1-8 Taper of spindle center M.T.# 6 Spindle speeds 24-1,600 rpm / 12 steps 24/ 32/ 55/ 70/ 95/ 160/ 240/ 320/ 550/ 700/ 950/ 1600 rpm Longitudinal feeds 0.0012-0.0252 IPR, 42 kinds Cross feeds 0.0006-0.0126 IPR, 42 kinds Inch threads 56-2 TPI, 40 kinds 56, 52,48, 46, 44, 40, 36, 32, 28, 26, 24, 23, 22, 20, 18, 16, 14, 13, 12, 11-1/2, 11, 10, 9, 8, 7, 6-1/2, 6, 5-3/4, 5-1/2, 5, 4-1/2, 4, 3-1/2, 3-1/4, 3, 2-7/8, 2-3/4, 2-1/2, 2-1/4, 2 Metric threads 0.4-14 mm , 53 kinds Module threads 0.4-7 mm, 32 kinds Diameteral pitch threads 32-4 DP , 32 kinds Max. travel of top slide 5” Max. travel of cross slide 12” 4-way tool post size 1” x 1” Longitudinal leadscrew diameter / pitch 1-1/2” / 4 PTI Max. weight of workpiece 800 LBS Max. travel of tailstock quill 4-3/4” Diameter of tailstock quill 2-1/8” Taper of tailsotck quill center M.T. # 4 Main motor 7.5 HP, 220V/440V, 3 phase, prewired on 220V Coolant pump motor 1/8 HP, 220V/440V, 3 phase, prewired on 220V Net weight, approx. 5,950 LBS Overall dimensions, LxWxH 88” x 41” x 108”

Ad # 8521		Hollow Spindle/Big Bore Engine Lathes		Ad to Checklist
—	Longem	LG-2080DS	Very Good	Sold	Photo / More Info.
20 swing x 80 centers: 20" swing over ways, 80 " centers dist 12" swing over crosslide gap bed taper attach 2 axis readout 3-1/8" spindle bore QC toolpost CXA

Processing Time: 0 wallclock secs ( 0.08 usr + 0.00 sys = 0.08 CPU)

Website Hosting & Development by IndSite.